Fender Rumble Studio 40 Stage 800 User Manual SAFETY NOTE: SPEAKER CABLES
![Fender Rumble Studio 40](https://usermanual-prod.b-cdn.net/images/afe89c4c-4883-485a-a84c-dfa3dd6e508f.jpg?token=BSMe6cb58XmPmYsevPXiBVWYjyOuQNHzo73bqeNEgDQ&width=400&expires=33258007373)
The Rumble Stage 800 amplifier’s high-power class “D” amplifier operates in bridge mode, meaning that voltage is present in both terminals (+) and (-). Use caution when connecting a speaker cable to the External Speaker output on the rear panel—never let the tip (+) or sleeve (-) of a speaker cable (see illustration below) contact the amp’s metal chassis or any other earth-grounded electrical equipment (i.e., audio mixers and other sound reinforcement devices). A speaker cable plugged into the amp’s External Speaker output should be connected only to another speaker cabinet.
Use caution when connecting 1/4” speaker cables with non-insulated (bare metal) plugs—always make speaker cable connections with the amp’s power turned off.
![](https://usermanual-prod.b-cdn.net/bcdn_token=yiuOAdeiYsYSjq6U-vi9gH-Pj75fUATYYqT17ZTcZBw&token_path=%2Fdocuments%2F2c46d794-bb9a-49da-b119-0c9689b31f4b%2Fextract%2Ffigures%2F&expires=33258007373/documents/2c46d794-bb9a-49da-b119-0c9689b31f4b/extract/figures/fileoutpart7.png)
Was this information helpful?