GoPro Omni User Manual MULTI-SHOT MODE
Multi-Shot mode contains three capture modes: Burst, Time Lapse and Night Lapse.
Capture Mode | Description |
|---|---|
Burst (default) | Captures up to 30 photos in 1 second. Perfect for capturing the definitive moment in fast-action sports. |
Time Lapse | Captures a series of photos at specified intervals. You can use Time Lapse to capture photos of any activity, so you can choose the best ones later. |
Night Lapse | Captures a series of photos at specific intervals and exposure times. Use Night Lapse in low light environments, such as when capturing the night sky over a period of time. For available exposure times and examples of when to use them, see (<>)Shutter (page 29). |
CAPTURING BURST PHOTOS
Select Burst mode:
Press the Power/Mode button [
] repeatedly until you get to Multi-Shot mode.Press the Settings/Tag button [
] to open the settings menu.Press the Shutter/Select button [
] repeatedly until you get to Burst.
Press the Settings/Tag button [
] to close the settings menu. The Burst icon [ 
] appears in the upper left on your camera status screen.
Press the Shutter/Select button [
]. The camera status lights flash and the camera beeps multiple times.
See Rate for options available for Burst photos.
CAPTURING TIME LAPSE OR NIGHT LAPSE PHOTOS
Select the desired multi-shot capture mode (Time Lapse or Night Lapse):
Press the Power/Mode button [
] repeatedly until you get to Multi-Shot mode.Press the Settings/Tag button [
] to open the settings menu.Press the Shutter/Select button [
] repeatedly until you get to the desired capture mode (Time Lapse or Night Lapse).Press the Settings/Tag button [
] to close the settings menu. The icon for the selected capture mode appears in the upper left on your camera status screen.
Press the Shutter/Select button [
]. The camera initiates countdown and the camera status lights flash each time a photo is captured. To stop capturing, press the Shutter/Select button [
]. The camera status lights flash three times and the camera beeps three times.
MULTI-SHOT SETTINGS
The capture mode that you select determines the Multi-Shot settings that appear in the rest of the menu.
For instruction on how to change the following settings, see Navigating Settings Menus.
RATE
Rate applies only to Burst. Photos can be captured at the following rates:
3 photos in 1 second
5 photos in 1 second
10 photos in 1 second
10 photos in 2 seconds
10 photos in 3 seconds
30 photos in 1 second (default)
30 photos in 2 seconds
30 photos in 3 seconds
30 photos in 6 seconds
SHUTTER
Shutter applies only to Night Photo and Night Lapse and determines the amount of time that the shutter is open. The options for this setting are auto (up to 2 seconds), 2, 5, 10, 15, 20 or 30 seconds. The default setting is auto.
Settings | Examples |
|---|---|
Auto (up to 2 sec) | Sunrise, sunset, dawn, dusk, twilight, night |
2 sec, 5 sec, 10 sec | Dawn, dusk, twilight, traffic at night, Ferris wheel, fireworks, light painting |
20 sec | Night sky (with light) |
30 sec | Night stars, Milky Way (complete darkness) |
INTERVAL
Interval applies only to Time Lapse and Night Lapse. Interval determines the amount of time that passes between each captured frame.
Time Lapse Intervals
Available intervals for Time Lapse range from 2 seconds (default) to 60 seconds.
Interval | Examples |
|---|---|
2 seconds | Busy street corner |
5-10 seconds | Sunset |
10-60 seconds | Lengthy activities, such as construction projects |
Night Lapse Intervals
Available intervals for Night Lapse range from 4 seconds to 60 minutes. Continuous (default) causes the Interval to match the Shutter setting. For example, if Shutter is set to 10 seconds and Interval is set to continuous, your camera captures a photo every 10 seconds.
MEGAPIXELS
With Omni, each HERO4 Black captures photos at 12MP.
Up Next
Was this information helpful?