GoPro Omni

GoPro Omni User Manual IMPORTANT MESSAGES

GoPro Omni

MICROSD CARD MESSAGES

If you cannot capture video, one of the microSD cards may be missing, full, or experiencing an error.

NO SD

No card present. The camera requires a microSD, microSDHC or microSDXC card (sold separately) to capture videos.

FULL

Card is full. Delete files or swap card.

SD ERR

Camera is unable to read card formatting. Reformat the card in the camera.

📘

PRO TIP: Reformat your microSD cards before each shooting session to ensure that the cards remain in good condition.

ARRAY ERROR

If Array Error appears on the primary camera, check the secondary cameras for errors and improper connections. To identify the secondary camera that is experiencing the error, refer to its light on the inner cube.

  • No light on the inner cube:

    • The camera has no battery installed or the battery needs charging

    • The camera is not running array camera firmware or is running a different firmware version than the other cameras in the array

  • Red light on in the inner cube is blinking:

    • The camera has no microSD card

    • The camera’s microSD card has an error

Be sure to resolve any issues before attempting to record.

FILE REPAIR ICON

If your last video file was corrupted during recording, the camera displays the File Repair icon while it tries to repair the file. When this process is finished, press any button to continue using the camera.

TEMPERATURE ICON

The Temperature icon appears on the camera status screen when the camera becomes too hot and needs to cool down. If this happens with a camera in Omni, let it sit and cool for 20 minutes before attempting to use it again. Your camera was designed to identify conditions of overheating and is designed to respond accordingly.

Up Next

Was this information helpful?