Blackmagic HyperDeck Extreme 8K HDR

Blackmagic HyperDeck Extreme HDR User Manual Playback

Blackmagic HyperDeck Extreme 8K HDR

Once you have finished recording, simply press the ‘play’ button, or tap the play icon on the touchscreen to start playback immediately.

You might have noticed that if you press the play button or tap the play icon more than once, the play icon on the touchscreen changes. That is because pressing play more than once enables the ‘loop’ feature. Looping can be helpful if you want the playback to continue looping the same clip indefinitely, or to loop all clips on the timeline.

You can tell which loop feature is enabled by observing the play icon on the touchscreen. If it is not the loop feature you want, simply keep pressing or tapping play to cycle it to the feature you do want.

Loops the same clip.
After the final clip has played, playback will return to the first clip and continue playing all clips.

To disable the loop feature, simply tap or press play until the loop icons are no longer visible.

Toggle the stop button to switch between playback and record mode

You aren’t locked in to using the soft touch buttons or touchscreen buttons to control HyperDeck Extreme. Using the HyperDeck Extreme Control you can control your HyperDeck Extreme and 7 other remote devices at once!

For more information on HyperDeck Extreme Control, see the dedicated section later in this manual.

Was this information helpful?