BISSELL PROHEAT 2XPET PRO 2066 SERIES User Manual Cleaning with Hose & Tool

📘

• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. Brushroll continues to rotate when in the upright position.

• Brushroll continues to turn while product is turned on and handle is in upright position. To avoid damage to carpet, rugs, furniture and flooring, avoid tipping cleaner or setting it on furniture, fringed area rugs, or carpeted stairs during tool use.

• The brushroll remains on while cleaning with the hose and tool. Do not allow cleaner to sit in one location for an extended period of time, as damage

  to floor can result.

1. Lift the accessory hose door on top of foot on the front of the machine. The door flips toward the machine to open.

   

2. Insert the hose and snap into place. Be sure the colored hose release clip is facing out, away from machine.

   

3. Attach the tool to the end of the hose. (Tools may vary by model.) Press the power button to turn machine on.

   

4. Press the spray trigger button to spray the soiled area, then slowly move tool back and forth over the area.

   Release the trigger to suck up the dirty solution. Work in small sections until the area is clean.

   When finished cleaning, turn the machine on to suction up warm clean water to rinse the inside of the hose and tool. Detach the hose and tool and close the accessory hose door. Let the hose and tool air dry before storing.

   

📘

NOTE: If using the Deep Reach Tool (select models only) or Pet Stain Tool (select models only) be sure the needles of the tool are pressed down into the carpet so the spray gets into the carpet fibers.