BISSELL PROHEAT 2XPET PRO 2066 SERIES User Manual Bare Floor Cleaning*

🚧

WARNING: To reduce the risk of fire and electric shock when cleaning a hard floor, the BISSELL bare floor tool must be used and is only to be used with BISSELL Wash & Shine Hard Floor Cleaner formula intended for use with this appliance.

📘

NOTE: The bare floor tool that is compatible with the ProHeat 2X Revolution may not be included. It is available for purchase by contacting our team by phone or visiting us online at BISSELL.com.

1. With the machine unplugged, attach the bare floor tool to the bottom of the machine by lining the tool to the edge of the nozzle. Rotate down until it clicks into place.

   Follow filling instructions and switch cleaning mode to Express Clean.

   

2. Plug into a properly grounded outlet and press the power button.

   Clean by pressing the trigger for 1 wet pass forward, 1 wet pass back, and then release the trigger and make 1 dry pass forward, 1 dry pass back.

   

3. When finished, unplug the machine and remove the bare floor tool by rotating the tool up to unhook from the nozzle.

   Rinse and let dry before storing.