BISSELL PROHEAT 2XPET PRO 2066 SERIES User Manual Assembly
![BISSELL PROHEAT® 2X REVOLUTION® PET UPRIGHT CARPET WASHER | 2066F](https://usermanual-prod.b-cdn.net/images/f20ff320-b011-463f-adc7-ef4f5a3761ef.jpg?token=WEHSWejwMyDgyvfFvQ7GJnXrQ8IOrotRU3dHzRBbuwc&width=400&expires=33261425169)
🚧Do not plug in your deep cleaner until you are familiar with all instructions and operating procedures
Your deep cleaner comes in four easy-to-assemble components and an accessory bag
Base
Upper Handle
Clean Water Tank
Carry Hand
A Phillips screwdriver is required for Assembly in Step 3.
![](https://usermanual-prod.b-cdn.net/images/a8332aa9-eadb-48d0-961a-bc632181f1db.png?token=Zf0xpVXI2iAVZK9n6GRf1-deZA66IIUmVbXaHftMFl8&expires=33214882228)
First, insert the (aluminum) Upper Handle at the top of the base until you hear a “click”. Do NOT put the clean tank on the machine until Step 5.
Next, align the carry handle with the slots on either side of the base (behind the power switch and cleaning mode switch). The carry handle will “click” into place.
Use a Philips screwdriver to secure the screw (found taped to upper handle) into the carry handle.
Wrap the cord around the carry handle and Quick Release™ Cord Wrap hook.
At the bottom of the upper handle, align the clean water tank with the grooves and slide the tank into place.
Thanks for buying a BISSELL carpet cleaner!
We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your carpet cleaner works as well as it does today for years to come, so this guide has tips on using, maintaining and if there’s a problem, troubleshooting.
In just a few simple assembly steps, you’ll be ready to deep clean.
Up Next
Was this information helpful?