BISSELL PROHEAT 2XPET PRO 2066 SERIES User Manual Brush Roll & Nozzle Care

🚧

WARNING: To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.

📘

NOTE: Be sure to clean the brush rolls and nozzle before storing your machine. Follow these steps if your nozzle becomes clogged with hair or debris.

1. Turn off and unplug the machine from the grounded outlet.

   

2. Remove the nozzle from the foot: scoop and grip the Accessory Hose Door. Pull up to remove the nozzle.

   

3. Pull forward the nozzle wire on the front of the brush roll cover for release.

   

4. To reveal the brush rolls. Press on the two release buttons and lift straight up.

   

5. At this point, the nozzle and brush roll cover can be rinsed under running water and the nozzle clean out tool can be inserted to unclog hair or debris.

   

6. Use the comb to brush out the debris or hair from the brush rolls.

   

7. When finished, return the brush roll cover by pushing it straight down. You will hear a click from each “push” button when the cover is pushed down into place. Ensure the nozzle wire on the front of the brush roll cover has also snapped back into place. Line up the nozzle from the edge near the floor and rotate to snap back into place.