GoPro HERO11 Black User Manual Mounting Your GoPro

MOUNTING HARDWARE

1. Mounting Buckle

2. Thumb Screw

3. Curved Adhesive Mount

USING THE MOUNTING FINGERS

Depending on the mount you’re using, you’ll either use a mounting buckle or attach your GoPro directly to the mount itself.

See Using the Adhesive Mounts for tips on using adhesive mounts.

1. Flip the folding fingers down into the mounting position.

2. Interlock the folding fingers on your camera with the mounting fingers on the buckle.

3. Secure your camera to the mounting buckle with a thumb screw.

4. Attach the mounting buckle to the mount.

USING THE ADHESIVE MOUNTS

Follow these guidelines when attaching adhesive mounts to helmets, vehicles, and gear:

1. Attach mounts at least 24 hours before you use them.

2. Only attach the mounts to smooth surfaces. They won’t stick properly to porous or textured surfaces.

3. Firmly press mounts into place. Be sure the adhesive is in full contact with the surface.

4. Only use on clean, dry surfaces. Wax, oil, dirt, or other debris will weaken the bond, and you could lose your camera.

5. Attach mounts in dry, room-temperature conditions. They won’t stick properly in cold or damp environments or on cold or damp surfaces.

6. Check state and local regulations and laws to ensure that attaching a camera to equipment (such as hunting gear) is permitted. Always comply with regulations that restrict the use of consumer electronics or cameras.

🚧

WARNING: To avoid injury, do not use a tether when mounting your camera on a helmet. Do not mount the camera directly on skis or snowboards.

For more information about mounts, visit gopro.com.

🚧

WARNING: Always use a helmet that meets applicable safety standards if you’re using a GoPro helmet mount or strap.

Choose the right helmet for your sport or activity, and make sure that it’s the right size and fit for you. Check to see that your helmet’s in good condition, and always follow the manufacturer’s instructions on safe use.

Replace any helmet that’s been subjected to a major impact. No helmet can protect against injury in every accident. Be safe.

USING YOUR GOPRO IN + AROUND WATER

Your GoPro is waterproof to 33ft (10m) with the door locked. You won’t need an additional housing before diving in.

The touch screen was designed to work when wet, but you may need to wipe it off if it has trouble sensing your commands. Although it will not work under water, you can use the camera’s buttons to navigate the menus when you’re submerged.

To learn more, see Navigating With the Buttons.

📘

PRO TIP: Use a camera tether and a Floaty (sold separately) to keep your camera afloat in case it detaches from the mount.

To capture extreme adventures down to 196ft (60m), pick up the Protective Housing (HERO11 Black), sold separately.

For more information on Camera Tethers, Floaty, and the Protective Housing, visit gopro.com.