GoPro HERO11 Black Mini

GoPro HERO11 Black Mini User Manual Setting Up Your Camera

GoPro HERO11 Black Mini

SD CARDS

You’ll need a microSD card (sold separately) to save your videos. Use a brand-name card that fits these requirements:

  • microSD, microSDHC™, or microSDXC™

  • Rated Class V30, UHS-3, or higher

  • Capacity up to 512GB

For a list of recommended microSD cards, visit GoPro.com/microsdcards.

Be sure your hands are clean and dry before handling your SD card. Check the manufacturer’s guidelines to see your card’s acceptable temperature range and other important information.

Heads Up: SD cards can degrade over time and affect your camera’s ability to save your media. Try swapping out an older card for a new one if you’re having any problems.

REFORMATTING YOUR SD CARD

Keep your SD card in good condition by reformatting it regularly. This will erase all of your media, so be sure to save it first.

  1. Press the Status/Pair button to turn on your camera.

  2. Press the Status/Pair button again to go to your camera's Preferences (press twice if you're using Pro Controls).

  3. Press the Shutter button repeatedly until you get to Format SD.

  4. Press the Status/Pair button to select Format SD.

  5. Press the Status/Pair button to cycle from the to the (or press the Shutter button with the highlighted to go back).

  6. Press Shutter button (with highlighted) to confirm that you want to format your SD card.

For more, see Using Buttons to Adjust Camera Preferences.

SD CARD + BATTERY SETUP

  1. Unlock the door latch and flip the door open.

    With your camera off, insert the SD card into the card slot with the label facing the back of the camera.

    You can eject the card by pressing it into the slot with your fingernail.

    📘

    NOTE: Only eject the SD card when your camera is off. Removing the SD card while your camera is on could permanently damage your camera.

  2. Connect your camera to a USB charger or computer using the included USB-C cable. It takes about 2 hours for the battery to fully charge. The camera status light will turn off when it’s done.

    To learn more, see Battery Information.

    Heads Up: The battery cannot be removed from the camera.

  3. Unplug the cable and shut the door when charging is complete. Be sure the door latch is closed and locked before using your camera.

    📘

    NOTE: Your camera’s door is removable. Be sure that the door is securely locked and sealed after closing.

Was this information helpful?