Sony Support

Sony KDL-22E5300 Manual

Documents

Sony KDL-22E5300 KDL-22E5310 Other Document [PDF]

Pages: 1 | Size: 18.7 kB

Sony KDL-22E5300 KDL-22E5310 User Manual [PDF]

Pages: 49 | Size: 1.38 MB

Table of Contents

  • Start-up Guide
    • Before Use
      • To check the accessories
      • To insert batteries into the remote
    • 1: Connecting an aerial/Set Top Box/recorder (e.g. DVD recorder)
    • 2: Preventing the TV from toppling over
      • For additional stability, the hole on the back of the TV can be used to secure the TV to a wall.
      • 1 Unplug the TV.
      • 2 Run the suitable cable (not supplied) through the hole on the back of the TV.
      • 3 Anchor the Cable to a stable surface such as a wall or pillar.
    • 3: Bundling the cables
      • ~
    • 4: Performing the initial Set-up
      • 1
      • 2
      • 3
      • ~
    • Detaching the Table-Top Stand from the TV
      • ~
    • Safety Information
    • Precautions
    • Remote and TV Controls/Indicators
      • Remote and TV controls
        • z
      • ~
      • ~
        • z
      • ~
        • Indicators
        • About the operation guide on the TV screen
  • Watching TV
    • Watching TV
      • 1 Press 1 on the TV to turn on the TV.
        • 2 Press DIGITAL to switch to digital mode, or press ANALOG to switch to analogue mode.
        • 3 Press the number buttons or PROG +/- to select a TV channel.
      • To access Text
        • z
      • To change the Screen Format manually
      • ~
        • z
    • Using the Digital Electronic Programme Guide (EPG)
      • 1 In digital mode, press GUIDE.
        • 2 Perform the desired operation as shown in the following table or displayed on the screen.
          • 1 Press the blue button.
          • 2 Press F/f to select a category, then press .
          • 1 Press F/f/G/g to select a future programme you want to display, then press .
          • 2 Press F/f to select “Reminder”, then press .
      • ~
        • 1 Press .
        • 2 Press F/f to select “Timer list”, then press .
        • 3 Press F/f to select the programme you want to cancel, then press .
        • 4 Press F/f to select “Cancel Timer”, then press .
        • 5 Press G/g to select “Yes”, then press .
    • Using the Favourite List
      • Analogue Favourites
        • 1 In analogue mode, press .
          • 2 Perform the desired operation as shown in the following table or displayed on the screen.
            • 1 Press F/f to select “Edit Favourites”, then press .
            • 2 Press F/f to select the channel number, then press .
            • 3 Press F/f to select “- -”, then press .
      • Digital Favourites
        • 1 In digital mode, press .
          • 2 Perform the desired operation as shown in the following table or displayed on the screen.
            • 1 Press the blue button.
            • 2 Press the yellow button to select the Favourite list to edit.
            • 3 Press F/f/G/g to select the channel to add or remove, then press .
            • 1 Press the yellow button to select a Favourite list.
            • 2 Press F/f to select a channel, then press .
            • 1 Press the blue button.
            • 2 Press the yellow button to select the Favourite list to edit.
            • 3 Press the blue button.
            • 4 Press G/g to select “Yes”, then press .
  • Using Optional Equipment
    • Connecting Optional Equipment
      • Connecting audio-video equipment (quality order, high to low)
      • ~
        • Connecting audio/portable equipment
        • Connecting other equipment
          • z
      • ~
      • Viewing Pictures from Connected Equipment
        • 1 Press .
          • 2 Press F/f to select the desired input source, then press .
        • To view two pictures simultaneously - PAP (Picture and Picture)
        • ~
          • 1 Press OPTIONS.
            • 2 Press F/f to select “PIP/ PAP”, then press .
            • 3 Press F/f to select “PAP”, then press .
            • 4 Press the number buttons or PROG +/- to select the TV channel.
          • To view two pictures simultaneously - PIP (Picture in Picture)
            • 1 Press OPTIONS.
              • 2 Press F/f to select “PIP/ PAP”, then press .
              • 3 Press F/f to select “PIP”, then press .
              • 4 Press the number buttons or PROG +/- to select a TV channel.
            • z
      • Playing back Photo/Music/ Video via USB
        • 1 Connect a supported USB device to the TV.
          • 2 Press HOME.
          • 3 Press G/g to select “Photo”, “Music”, or “Video”.
          • 4 Press F/f to select a USB device, then press .
          • 5 Press F/f to select a file or folder, then press .
        • Photo Playback Auto Start
        • ~
          • The data on the USB device may be damaged.
          • To display a photograph - Picture Frame
            • 1 Select a photograph.
              • 2 Press OPTIONS while the selected photograph is displayed, then press F/f to select “Picture Frame Image” and press .
              • 3 Press RETURN repeatedly to return to the Home Menu.
              • 4 Press G/g to select “Photo”, then select “Picture Frame” and press .
        • ~
          • To display a photograph with the location on the map
            • 1 Select a photograph (page 21).
              • 2 Press the green/red buttons to zoom in/out on the map.
        • ~
          • z
            • 1 Connect the GPS unit to the USB port.
              • 2 Press HOME.
              • 3 Press G/g to select “Photo”.
              • 4 Press F/f to select the GPS unit, then press .
              • 5 Select the following items using F/f, then set them using G/g.
          • - Time Zone
          • - DST
            • 6 Select “OK”, then press .
            • 7 Disconnect the GPS unit and connect the device on which the photograph is stored.
            • 8 Select a photograph (page 21).
            • 9 Press the green/red buttons to zoom in/out on the map.
      • Using BRAVIA Sync with Control for HDMI
        • Control for HDMI
        • To connect the equipment that is compatible with Control for HDMI
        • To make the Control for HDMI settings
  • Using Home Network Features
    • ~
    • Connecting to the Network
    • Enjoying AppliCast
      • To Use Widgets
        • 1 Press HOME.
          • 2 Press G/g to select "Network".
          • 3 Press F/f to select the desired Widget to be displayed or simply select "AppliCast" icon to display your preferred list of Widgets.
          • 4 Follow the instruction on the Widget.
      • To Add or remove Widgets in AppliCast
        • 5 While you are displaying the Widget, press OPTIONS.
        • 6 Select "Add to AppliCast" or "Remove from AppliCast". Up to 30 Widgets can be registered in "AppliCast".
        • 7 Follow STEP1-2 above.
        • 8 Press F/f to select the desired Widget, then press OPTIONS.
        • 9 Follow STEP6.
        • z
      • ~
    • Enjoying Photo/Music/ Video Files via the Network
      • 1 Press HOME.
        • 2 Press G/g to select “Photo”, “Music”, or “Video”.
        • 3 Press F/f to select a server, then press .
        • 4 Press F/f to select a file or folder, then press .
      • z
      • ~
        • To enjoy photographs, music and videos on the TV screen by operating devices - Renderer
          • 1 Set “Renderer Function”, “Renderer Access Control” and “Renderer Set-up” in “Network Settings” if necessary (page 40).
            • 2 Play the file selected using the controller on the TV.
      • ~
    • Checking the Network Connection
      • 1 Press HOME.
        • 2 Press G to select “Settings”.
        • 3 Press F/f to select “Network Settings”, then press .
        • 4 Select “Network”, then press .
        • 5 Select “IP Address Settings”, then press .
        • 6 Select an item, and press .
        • 7 Press .
        • 8 Press g to select “Test”, then press .
        • 9 Press G/g to select “Yes”, then press .
      • z
      • If “Connection successful.” does not appear, see “Troubleshooting” (page 46).
    • Adjusting the Server Display Settings
      • 1 Set the server to allow connections from the TV.
        • 2 Press HOME.
        • 3 Press G/g to select “Settings”.
        • 4 Press F/f to select “Network Settings”, then press .
        • 5 Select “Server Display Settings”, then press .
        • 6 Select the server you want to display on the Home Menu, then press .
        • 7 Select “Yes”, then press .
      • If you cannot connect to your home network
        • 1 Press HOME.
          • 2 Press G/g to select “Settings”.
          • 3 Press F/f to select “Network Settings”, then press .
          • 4 Select “Server Diagnostics”, then press .
          • 5 Select “Yes”, then press .
          • 6 Select the server you want to confirm, then press .
  • Using Menu Functions
    • Navigating through TV Home Menu on XMB™
      • The XMB™ (XrossMediaBar) is a menu of BRAVIA features and input sources displayed on the TV screen. The XMB™ is an easy way to select programming and adjust settings on your BRAVIA TV.
        • 1 Press HOME to display the XMB™.
          • 2 Press G/g to select the category.
          • 3 Press F/f to select the item, then press .
          • 4 Follow the instructions on the screen.
          • 5 Press HOME to exit.
        • ~
    • TV Settings Menu
      • System Update
      • Clock/Timers
        • z
      • Eco
      • ~
        • Picture
      • ~
        • z
      • ~
      • ~
      • ~
        • Sound
      • ~
        • Screen (for inputs other than a PC)
      • ~
        • Screen (for PC input)
          • z
        • Video Settings
        • Audio Settings
        • Set-up
      • ~
        • 1 Press F/f to select the desired input source, then press .
        • 2 Press g to assign an icon and name.
      • ~
      • ~
        • Analogue Set-up
      • ~
        • 1 Press F/f to select the channel you want to move to a new position, then press .
        • 2 Press F/f to select the new position for the channel, then press .
        • 1 Press F/f to select the channel you want to name, then press .
        • 2 Press F/f to select the desired letter or number (“_” for a blank space), then press g.
        • 3 Repeat step 2 until you finish entering the name.
        • 4 Press to exit the labeling procedure.
        • 1 Press F/f to select “Programme”, then press .
        • 2 Press F/f to select the programme number you want to manually tune (if tuning a VCR, select channel 00), then press .
        • 3 Press F/f to select “System”, then press .
        • 4 Press F/f to select one of the following TV broadcast systems, then press .
        • 5 Press F/f to select “Channel”, then press .
        • 6 Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g.
        • 7 Tune the channels as follows:
        • 8 Press to jump to “Confirm”, then press .
      • ~
        • Digital Set-up
      • ~
        • 1 Press F/f to select the channel you want to remove or move to a new position.
        • 2 Remove or change the order of the digital channels as follows:
        • 3 Press RETURN.
        • 1 Press the number buttons to enter the channel number you want to tune, or press F/f.
        • 2 When the available channels are found, press F/f to select the channel you want to store, then press .
        • 3 Press F/f to select the channel number where you want to store the new channel, then press .
        • z
        • Network Settings
  • Additional Information
    • Installing the Accessories (Wall-Mount Bracket)
      • To Customers:
      • To Sony Dealers and Contractors:
      • ~
        • TV installation dimensions table
          • Figures in the above table may differ slightly depending on the installation.
          • The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to “Specifications” (page 43) for its weight.
        • Hook locations diagram/table
    • Specifications
      • ~
    • Troubleshooting
      • 1 Count how many times the 1 (standby) indicator flashes between each two second break.
        • 2 Press 1 on the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes).
      • 1 Check the items in the tables below.
        • 2 If the problem persists, have your TV serviced by qualified service personnel.
    • Index

Sony KDL-22E5300 KDL-22E5310 User Manual [PDF]

Pages: 51 | Size: 1.95 MB

Table of Contents

  • NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM
    • A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience.
    • Should the fuse in the plug supplied need to be replaced, a 10 AMP fuse approved by ASTA or BSI to BS 1362 (i.e., marked with or ) must be used.
    • When an alternative type of plug is used it should be fitted with a 10 AMP FUSE otherwise the circuit should be protected by a 10 AMP FUSE at the distribution board.
    • If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse...
    • Open the fuse compartment with a blade screwdriver, and replace the fuse. Please refer to the illustration that actually equipped with the product.
  • Start-up Guide
    • Before Use
      • To check the accessories
      • To insert batteries into the remote
    • 1: Connecting an aerial/Set Top Box/recorder (e.g. DVD recorder)
    • 2: Preventing the TV from toppling over
      • For additional stability, the hole on the back of the TV can be used to secure the TV to a wall.
      • 1 Unplug the TV.
      • 2 Run the suitable cable (not supplied) through the hole on the back of the TV.
      • 3 Anchor the Cable to a stable surface such as a wall or pillar.
    • 3: Bundling the cables
      • ~
    • 4: Performing the initial Set-up
      • 1
      • 2
      • 3
      • ~
    • Detaching the Table-Top Stand from the TV
      • ~
    • Safety Information
    • Precautions
    • Remote and TV Controls/Indicators
      • Remote and TV controls
        • z
      • ~
      • ~
        • z
      • ~
        • Indicators
        • About the operation guide on the TV screen
  • Watching TV
    • Watching TV
      • 1 Press 1 on the TV to turn on the TV.
        • 2 Press DIGITAL to switch to digital mode, or press ANALOG to switch to analogue mode.
        • 3 Press the number buttons or PROG +/- to select a TV channel.
      • To access Digital Text
      • To access Analogue Text
        • z
      • To change the Screen Format manually
      • ~
        • z
    • Using the Digital Electronic Programme Guide (EPG)
      • 1 In digital mode, press GUIDE.
        • 2 Perform the desired operation as shown in the following table or displayed on the screen.
          • 1 Press the blue button.
          • 2 Press F/f to select a category, then press .
          • 1 Press F/f/G/g to select a future programme you want to display, then press .
          • 2 Press F/f to select “Reminder”, then press .
      • ~
        • 1 Press .
        • 2 Press F/f to select “Timer list”, then press .
        • 3 Press F/f to select the programme you want to cancel, then press .
        • 4 Press F/f to select “Cancel Timer”, then press .
        • 5 Press G/g to select “Yes”, then press .
    • Using the Favourite List
      • Analogue Favourites
        • 1 In analogue mode, press .
          • 2 Perform the desired operation as shown in the following table or displayed on the screen.
            • 1 Press F/f to select “Edit Favourites”, then press .
            • 2 Press F/f to select the channel number, then press .
            • 3 Press F/f to select “- -”, then press .
      • Digital Favourites
        • 1 In digital mode, press .
          • 2 Perform the desired operation as shown in the following table or displayed on the screen.
            • 1 Press the blue button.
            • 2 Press the yellow button to select the Favourite list to edit.
            • 3 Press F/f/G/g to select the channel to add or remove, then press .
            • 1 Press the yellow button to select a Favourite list.
            • 2 Press F/f to select a channel, then press .
            • 1 Press the blue button.
            • 2 Press the yellow button to select the Favourite list to edit.
            • 3 Press the blue button.
            • 4 Press G/g to select “Yes”, then press .
  • Using Optional Equipment
    • Connecting Optional Equipment
      • Connecting audio-video equipment (quality order, high to low)
      • ~
        • Connecting audio/portable equipment
        • Connecting other equipment
          • z
      • ~
      • Viewing Pictures from Connected Equipment
        • 1 Press .
          • 2 Press F/f to select the desired input source, then press .
        • To view two pictures simultaneously - PAP (Picture and Picture)
        • ~
          • 1 Press OPTIONS.
            • 2 Press F/f to select “PIP/ PAP”, then press .
            • 3 Press F/f to select “PAP”, then press .
            • 4 Press the number buttons or PROG +/- to select the TV channel.
          • To view two pictures simultaneously - PIP (Picture in Picture)
            • 1 Press OPTIONS.
              • 2 Press F/f to select “PIP/ PAP”, then press .
              • 3 Press F/f to select “PIP”, then press .
              • 4 Press the number buttons or PROG +/- to select a TV channel.
            • z
      • Playing back Photo/Music/ Video via USB
        • 1 Connect a supported USB device to the TV.
          • 2 Press HOME.
          • 3 Press G/g to select “Photo”, “Music”, or “Video”.
          • 4 Press F/f to select a USB device, then press .
          • 5 Press F/f to select a file or folder, then press .
        • Photo Playback Auto Start
        • ~
          • The data on the USB device may be damaged.
          • To display a photograph - Picture Frame
            • 1 Select a photograph.
              • 2 Press OPTIONS while the selected photograph is displayed, then press F/f to select “Picture Frame Image” and press .
              • 3 Press RETURN repeatedly to return to the Home Menu.
              • 4 Press G/g to select “Photo”, then select “Picture Frame” and press .
        • ~
          • To display a photograph with the location on the map
            • 1 Select a photograph (page 21).
              • 2 Press the green/red buttons to zoom in/out on the map.
        • ~
          • z
            • 1 Connect the GPS unit to the USB port.
              • 2 Press HOME.
              • 3 Press G/g to select “Photo”.
              • 4 Press F/f to select the GPS unit, then press .
              • 5 Select the following items using F/f, then set them using G/g.
          • - Time Zone
          • - DST
            • 6 Select “OK”, then press .
            • 7 Disconnect the GPS unit and connect the device on which the photograph is stored.
            • 8 Select a photograph (page 21).
            • 9 Press the green/red buttons to zoom in/out on the map.
      • Using BRAVIA Sync with Control for HDMI
        • Control for HDMI
        • To connect the equipment that is compatible with Control for HDMI
        • To make the Control for HDMI settings
  • Using Home Network Features
    • ~
    • Connecting to the Network
    • Enjoying AppliCast
      • To Use Widgets
        • 1 Press HOME.
          • 2 Press G/g to select "Network".
          • 3 Press F/f to select the desired Widget to be displayed or simply select "AppliCast" icon to display your preferred list of Widgets.
          • 4 Follow the instruction on the Widget.
      • To Add or remove Widgets in AppliCast
        • 5 While you are displaying the Widget, press OPTIONS.
        • 6 Select "Add to AppliCast" or "Remove from AppliCast". Up to 30 Widgets can be registered in "AppliCast".
        • 7 Follow STEP1-2 above.
        • 8 Press F/f to select the desired Widget, then press OPTIONS.
        • 9 Follow STEP6.
        • z
      • ~
    • Enjoying Photo/Music/ Video Files via the Network
      • 1 Press HOME.
        • 2 Press G/g to select “Photo”, “Music”, or “Video”.
        • 3 Press F/f to select a server, then press .
        • 4 Press F/f to select a file or folder, then press .
      • z
      • ~
        • To enjoy photographs, music and videos on the TV screen by operating devices - Renderer
          • 1 Set “Renderer Function”, “Renderer Access Control” and “Renderer Set-up” in “Network Settings” if necessary (page 40).
            • 2 Play the file selected using the controller on the TV.
      • ~
    • Checking the Network Connection
      • 1 Press HOME.
        • 2 Press G to select “Settings”.
        • 3 Press F/f to select “Network Settings”, then press .
        • 4 Select “Network”, then press .
        • 5 Select “IP Address Settings”, then press .
        • 6 Select an item, and press .
        • 7 Press .
        • 8 Press g to select “Test”, then press .
        • 9 Press G/g to select “Yes”, then press .
      • z
      • If “Connection successful.” does not appear, see “Troubleshooting” (page 46).
    • Adjusting the Server Display Settings
      • 1 Set the server to allow connections from the TV.
        • 2 Press HOME.
        • 3 Press G/g to select “Settings”.
        • 4 Press F/f to select “Network Settings”, then press .
        • 5 Select “Server Display Settings”, then press .
        • 6 Select the server you want to display on the Home Menu, then press .
        • 7 Select “Yes”, then press .
      • If you cannot connect to your home network
        • 1 Press HOME.
          • 2 Press G/g to select “Settings”.
          • 3 Press F/f to select “Network Settings”, then press .
          • 4 Select “Server Diagnostics”, then press .
          • 5 Select “Yes”, then press .
          • 6 Select the server you want to confirm, then press .
  • Using Menu Functions
    • Navigating through TV Home Menu on XMB™
      • The XMB™ (XrossMediaBar) is a menu of BRAVIA features and input sources displayed on the TV screen. The XMB™ is an easy way to select programming and adjust settings on your BRAVIA TV.
        • 1 Press HOME to display the XMB™.
          • 2 Press G/g to select the category.
          • 3 Press F/f to select the item, then press .
          • 4 Follow the instructions on the screen.
          • 5 Press HOME to exit.
        • ~
    • TV Settings Menu
      • System Update
      • Clock/Timers
        • z
      • Eco
      • ~
        • Picture
      • ~
        • z
      • ~
      • ~
      • ~
        • Sound
      • ~
        • Screen (for inputs other than a PC)
      • ~
        • Screen (for PC input)
          • z
        • Video Settings
        • Audio Settings
        • Set-up
      • ~
        • 1 Press F/f to select the desired input source, then press .
        • 2 Press g to assign an icon and name.
      • ~
      • ~
        • Analogue Set-up
      • ~
        • 1 Press F/f to select the channel you want to move to a new position, then press .
        • 2 Press F/f to select the new position for the channel, then press .
        • 1 Press F/f to select the channel you want to name, then press .
        • 2 Press F/f to select the desired letter or number (“_” for a blank space), then press g.
        • 3 Repeat step 2 until you finish entering the name.
        • 4 Press to exit the labeling procedure.
        • 1 Press F/f to select “Programme”, then press .
        • 2 Press F/f to select the programme number you want to manually tune (if tuning a VCR, select channel 00), then press .
        • 3 Press F/f to select “System”, then press .
        • 4 Press F/f to select one of the following TV broadcast systems, then press .
        • 5 Press F/f to select “Channel”, then press .
        • 6 Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g.
        • 7 Tune the channels as follows:
        • 8 Press to jump to “Confirm”, then press .
      • ~
        • Digital Set-up
      • ~
        • 1 Press F/f to select the channel you want to remove or move to a new position.
        • 2 Remove or change the order of the digital channels as follows:
        • 3 Press RETURN.
        • 1 Press the number buttons to enter the channel number you want to tune, or press F/f.
        • 2 When the available channels are found, press F/f to select the channel you want to store, then press .
        • 3 Press F/f to select the channel number where you want to store the new channel, then press .
        • z
        • Network Settings
          • How the switchover affects your TV equipment:
          • How to re-tune:
            • 1 Press "HOME" on the remote
              • 2 Press G/g to select "Settings"
              • 3 Press F/f to select "Digital Set-up", then press
              • 4 Press to select "Digital Auto Tuning"
              • 5 Press G to select "Yes" then press to start "Digital Auto Tuning"
              • 6 Follow the on screen instructions.
  • Additional Information
    • Installing the Accessories (Wall-Mount Bracket)
      • To Customers:
      • To Sony Dealers and Contractors:
      • ~
        • TV installation dimensions table
          • Figures in the above table may differ slightly depending on the installation.
          • The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to “Specifications” (page 43) for its weight.
        • Hook locations diagram/table
    • Specifications
      • ~
    • Troubleshooting
      • 1 Count how many times the 1 (standby) indicator flashes between each two second break.
        • 2 Press 1 on the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes).
      • 1 Check the items in the tables below.
        • 2 If the problem persists, have your TV serviced by qualified service personnel.
    • Index