Sony STR-DA5600ES User Manual
Table of Contents
- Description and location of parts
- Getting Started
- Checking the connection appropriate for your components
- 1: Installing speakers
- 2: Connecting the monitor
- 3: Connecting the video components
- 4: Connecting the audio components
- 5: Connecting the IR Blaster
- 6: Connecting the antennas (aerials)
- 7: Connecting to the network
- 8: Preparing the receiver and the remote
- 9: Setting the speakers
- 10: Calibrating the appropriate speaker settings automatically (Auto Calibration)
- 11: Configuring the network settings of the receiver
- 12: Preparing a computer to use as a server
- Guide to on-screen display operation
- Playback
- Enjoying sound/images from the component connected to the receiver
- Enjoying sound/images from the components connected to the DIGITAL MEDIA PORT
- Operating the TDM-iP50 using the GUI menu of the receiver
- Tuning
- Listening to FM/AM radio
- Presetting FM/AM radio stations
- Listening to satellite radio (USA/Canadian model only)
- Connecting a satellite radio tuner
- Preparing to listen to a satellite radio
- Selecting a channel of the satellite radio
- Presetting satellite radio channels
- Restricting access to specific channels (Parental Lock)
- Enjoying Surround Sound
- Playing back with 2-channel sound
- Playing back with multi-channel surround
- Enjoying a surround effect for music
- Enjoying a surround effect for movies
- Using Network Features
- About the network functions of the receiver
- Enjoying content stored on the server
- Enjoying the audio of a component connected to the receiver using other device via the home network
- Using a controller
- Listening to Rhapsody
- Listening to SHOUTcast
- Features of the Setup Manager application software
- Using Multi-zone Features
- What you can do with the Multi-zone function
- Making a multi-zone connection
- Setting the speakers in zone 2
- Switching the zone setting of the remote
- Operating the receiver from another zone (ZONE 2/ZONE 3 operations)
- Using Other Features
- Using “BRAVIA” Sync features
- Switching the monitors that output the HDMI video signals
- Outputting the HDMI signals even when the receiver is in standby mode (Pass Through)
- Switching between digital and analog audio
- Enjoying the sound/images from other inputs (Input Assign)
- Using the sleep timer
- Enjoying the surround effect at low volume levels (Night Mode)
- Recording using the receiver
- Switching the command mode of the receiver and the remote
- Using a bi-amplifier connection
- Adjusting Settings
- Using the setting menu
- Auto Calibration
- Speaker settings
- Surround settings
- EQ settings
- Multi Zone settings
- Audio settings
- Video settings
- HDMI settings
- Network settings
- Quick Click settings
- System settings
- Operating without connecting to a TV
- Operating Each Component Using the On-screen Remote (Quick Click)
- Operating components or lighting connected to the receiver using the on-screen remote (Quick Click)
- Using Quick Click
- Setting components that are operated by the on- screen remote
- Performing several commands in sequence automatically with Quick Click (Macro Play)
- Setting remote control codes that are not stored in Quick Click
- Resetting the remote code for Quick Click
- Operating Each Component Using the Multifunction Remote
- Operating each component using the multifunction remote
- Programming the remote
- Performing several commands in sequence automatically (Macro Play)
- Setting remote commander codes that are not stored in the remote
- Clearing all the contents of the remote’s memory
- Additional Information
- Precautions
- Troubleshooting
- Specifications
- Index