Blackmagic HyperDeck Studio HD Mini Manual

Table of Contents

• Introducing HyperDeck Disk Recorders
• Getting Started
  • Plugging in Power
  • Connecting Video and Audio
  • Checking Audio
  • Plugging in Media
• Recording Video
  • Recording on multiple media
    • Swapping Disks During Recording
• Playback
  • Playing Video with HyperDeck
    • Loop Playback
    • Dynamic LEDs
  • Using the Search Dial
• Using the Front Panel
  • Media Slot Indicators
  • Using the LCD Menu
• Settings
  • Record Menu
    • Input
    • Codec
    • Trigger Record
    • Input Re-Sync
  • Monitor Menu
    • Clean Feed
    • 3D LUT
  • Audio Menu
    • Recorded Audio Channels
    • Monitor Channels
    • Audio Meters
    • Headphone Level
    • Speaker Level
  • Storage Menu
    • Format Media
  • Setup Menu
    • Name
    • Language
    • Date
    • Time
    • Software
    • Front Panel
    • Camera
    • Default Standard
  • Network Settings
    • Protocol
    • IP Address, Subnet Mask and Gateway
  • Timecode Settings
    • Input
    • Drop Frame
    • Preset
    • Output
  • SDI Output
    • 3G-SDI Output
  • Genlock Settings
    • Reference Source
    • Reference Timing
  • File Settings
    • Timestamp File Suffix
  • HDR Format Override
    • Auto
    • Rec.709
    • Rec.2020 SDR
    • HLG
    • ST2084 (300)
    • ST2084 (500)
    • ST2084 (800)
    • ST2084 (1000)
    • ST2084 (2000)
    • ST2084 (4000)
  • Remote
    • Remote
    • Deck Control
  • Reset
    • Factory Reset
• Rear Panel
  • 1 Power
  • 2 Ethernet
  • 3 Remote
  • 4 Ext Disk
  • 5 Monitor Out
  • 6 Ref
  • 7 Timecode
  • 8 HDMI
  • 9 SDI
• Using the Monitor Output
  • Codec
  • Format
  • Timecode
  • Source
  • Name
  • Status
  • Storage Media Status
  • Disk or Drive Indicator
  • Media Bar
  • Time remaining
  • Slot status
  • Audio Meters
• Storage Media
  • SD Card
    • What SD cards should I use with HyperDeck Studio 4K Pro?
    • What SD cards should I use with HyperDeck Studio HD Pro?
    • What SD cards should I use with HyperDeck Studio HD Plus?
    • What SD cards should I use with HyperDeck Studio HD Mini?
  • SSD
    • What SSDs should I use with HyperDeck Studio 4K Pro?
    • What SSDs should I use with HyperDeck Studio HD Pro?
  • EXT Disk
    • What USB-C drives should I use with HyperDeck Studio 4K Pro?
    • What USB-C drives should I use with HyperDeck Studio HD Pro?
    • What USB-C drives should I use with HyperDeck Studio HD Plus?
    • What USB-C drives should I use with HyperDeck Studio HD Mini?
• Formatting Media
  • Preparing Media on a Computer
• Using your HyperDeck as a Webcam
  • Setting the Webcam Source
  • Setting up Open Broadcaster
• Blackmagic HyperDeck Setup
  • Using HyperDeck Setup
    • Setup Page
    • Network
  • LUTs Page
• Updating the Internal Software
• Teranex Mini Rack Shelf
• RS-422 Control
  • What is RS-422 Control?
    • Using an External RS-422 Controller
    • Supported RS-422 Commands
    • RS-422 Developer Information
• Transferring Files over a Network
  • Connecting to HyperDeck Studio
  • Transferring Files
• Connecting to an ATEM Switcher
• Understanding Post Production Workflows
  • Accessing Your Clips
    • Mac OS
    • Windows
• Developer Information
  • Blackmagic HyperDeck Ethernet Protocol
  • Protocol Commands
    • Protocol Details
• Help
  • Getting Help
    • Blackmagic Design Online Support Pages
    • Blackmagic Design Forum
    • Contacting Blackmagic Design Support
    • Checking the Software Version Currently Installed
    • How to Get the Latest Software Updates
• Regulatory Notices
• Safety Information
  • Warning for Authorized Service Personnel
• Warranty
  • 12 Month Limited Warranty