Toshiba 19LV610U 19LV611U 22LV610U Manual

Thursday, May 4, 2017
Download

Introduction 4 Connections 14 19/22/26-inch* class LCD TV/DVD Basic setup 22 COMBINATION 19LV610U TV operation 27 19LV611U Basic playback 47 22LV610U Advanced playback 50 22LV611U 26LV610U Function setup 63 OWNER’S MANUAL Others 69 Ownerʼs Record The model number and serial number are on the back of your TV/DVD. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV/DVD. ©2009 Toshiba Corporation Model number: Before operating the unit, please read this manual thoroughly. Serial number: *Screen size is approximate. 52G0101A.indb 1 1/5/09 2:59:33 PM

Introduction Dear Customer, Thank you for purchasing this Toshiba LCD TV or TV/DVD Combination television. CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat This manual will help you use the many exciting features of Panel Display your new LCD TV. Before operating your LCD TV or TV/DVD Combination, please read this manual completely, and keep it Congratulations on your purchase! As you enjoy your nearby for future reference. new product, please keep these safety tips in mind: • The examples used throughout this manual are based on the 26LV610U model. The Issue • The home theater entertainment experience is a growing trend Safety Precautions and larger flat panel displays are popular purchases. However, WARNING: TO REDUCE THE RISK OF FIRE OR flat panel displays are not always supported on the proper stands ELECTRIC SHOCK, DO NOT EXPOSE THIS or installed according to the manufacturer’s recommendations. APPLIANCE TO RAIN OR MOISTURE. • Flat panel displays that are TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES inappropriately situated on dressers, OR OPEN FLAMES AWAY FROM THIS PRODUCT AT bookcases, shelves, desks, TIMES. speakers, chests or carts may fall over and cause injury. WARNING R I S K OF E LECTR IC S HOCK TOSHIBA Cares! DO NOT OPEN • The consumer electronics industry is committed to making home CAUTION: TO REDUCE THE RISK OF ELECTRIC entertainment enjoyable and safe. SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER Tune Into Safety SERVICING TO QUALIFIED SERVICE PERSONNEL. • One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of your flat panel display. The lightning flash with arrowhead symbol, within an • Carefully read and understand all enclosed instructions for equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” proper use of this product. within the product’s enclosure that may be of • Don’t allow children to climb on or play with furniture and sufficient magnitude to constitute a risk of electric television sets. shock to persons. • Don’t place flat panel displays on furniture The exclamation point within an equilateral triangle, is intended to alert the user to the presence of that can easily be used as steps, such important operating and maintenance (servicing) as a chest of drawers. instructions in the literature accompanying the • Remember that children can appliance. become excited while watching a CAUTION: To reduce the risk of electric shock, program, especially on a “larger do not use the polarized plug with an extension than life” flat panel display. Care cord, receptacle, or other outlet unless the blades can be inserted completely to prevent blade should be taken to place or install exposure. the display where it cannot be pushed, pulled over, or knocked down. • Care should be taken to route all cords and WARNING: If you decide to wall mount this television, always use a UL Listed wall bracket appropriate for the cables connected to the flat panel display so that they cannot be size and weight of this television. The use of any wall bracket pulled or grabbed by curious children. other than a UL Listed wall bracket appropriate for the size Wall Mounting: If you decide to wall mount your and weight of this television for wall mounting this television could result in serious bodily injury and/or property damage. flat panel display, always: See “Choosing a location for your LCD TV” (Pg.6). • Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such ENERGY STAR® qualified TV. Products that earn as UL, CSA, ETL). the ENERGY STAR prevent green house gas • Follow all instructions supplied by the display and wall mount emissions by meeting strict energy efficiency manufacturers. guidelines set by the U.S. Environmental • If you have any doubts about your ability to safely install your Protection Agency and the U.S. Department of flat panel display, contact your retailer about professional Energy. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. installation. • Make sure that the wall where you are mounting the display is NOTE TO CATV INSTALLERS appropriate. Some wall mounts are not designed to be mounted This is a reminder to call the CATV system installer’s attention to walls with steel studs or old cinder block construction. If you to Article 820-40 of the NEC, which provides guidelines for proper are unsure, contact a professional grounding and, in particular, specifies that the cable ground shall be installer. connected to grounding system of the building, as close to the point of • A minimum of two people are cable entry as practical. For additional antenna grounding information, required for installation. Flat panel see item 29 on page 5. displays can be heavy. WARNING: Handling the cord on this product or cords associated with accessories sold with this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. 2 52G0101A P02-05.indd 2 1/6/09 3:21:58 PM

FCC compliance information CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY FROM THIS PRODUCT AT TIMES. FCC Declaration of Conformity Compliance Statement (Part 15): The Toshiba 19LV610U, 19LV611U, 22LV610U, 22LV611U, 26LV610U LCD TV/DVD Combination complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesired operation. Introduction The party responsible for compliance to these rules is: Toshiba America Consumer Products, L.L.C. 82 Totowa Rd. Wayne, NJ 07470. Ph: (800) 631-3811 or visit TACPʼs website at www.tacp.Toshiba.com NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION: Changes or modifications to this equipment not expressly approved by Toshiba could void the userʼs authority to operate this equipment. CAUTION: CLASS 1 THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM. LASER PRODUCT TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE Location of the required Marking MAINTENANCE, CONTACT AN AUTHORIZED SERVICE The rating sheet and the safety caution are on the rear of the unit. LOCATION. CERTIFICATION: COMPLIES WITH FDA RADIATION USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN COMPLIES WITH FDA PERFORMANCE STANDARDS FOR MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. LASER PRODUCTS EXCEPT FOR DEVIATIONS PURSUANT TO TO PREVENT DIRECT EXPOSURE TO LASER BEAM, NEVER LASER NOTICE NO. 50, DATED JUNE 24, 2007. OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. NEVER STARE INTO BEAM. ON DISPOSAL The lamp(s) inside this product contain mercury. Disposal may be regulated due to environmental considerations. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance (www.eiae.org). 3 52G0101A.indb 3 1/5/09 2:59:37 PM

Introduction SAFETY INSTRUCTIONS Important Safety Instructions Installation, Care, and Service 1) Read these instructions. Installation 2) Keep these instructions. Follow these recommendations and precautions and 3) Heed all warnings. heed all warnings when installing your TV: 4) Follow all instructions. 5) Do not use this apparatus near water. 16) To avoid damage to this product, never place or store the TV in direct sunlight; hot, humid areas; 6) Clean only with dry cloth. or areas subject to excessive dust or vibration. 7) Do not block any ventilation openings. 17) ALWAYS plug the product into an outlet that is located Install in accordance with the manufacturerʼs instructions. in such a manner that it can be easily unplugged in 8) Do not install near any heat sources such as case the product requires service. radiators, heat registers, stoves, or other apparatus 18) NEVER route the productʼs power cord inside a wall (including amplifiers) that produce heat. or similar enclosed area. 9) Do not defeat the safety purpose of the polarized or 19) Never modify this equipment. Changes or modifications grounding type plug. A polarized plug has two blades may void: a) the warranty, and b) the userʼs authority to with one wider than the other. A grounding type plug has operate this equipment under the rules of the two blades and a third grounding prong. Federal Communications Commission. The wide blade or the third prong Wide plug are provided for your safety. If 20) DANGER: RISK OF SERIOUS the provided plug does not fit into PERSONAL INJURY, DEATH, OR your outlet, consult an electrician for EQUIPMENT DAMAGE! Never place replacement of the obsolete outlet. the TV on an unstable cart, stand, or table. The TV may 10) Protect the power cord from being walked fall, causing serious personal injury, on or pinched, particularly at plugs, death, or serious damage to the TV. convenience receptacles, and the point where they exit from the apparatus. 21) Never place items such as vases, aquariums, or candles on top of the TV. 11) Only use attachments/accessories specified by the manufacturer. 22) WARNING: Always place the TV on the floor or a sturdy, level, stable Sturdy tie (as short as possible; min. 4 in.) 12) Use only with the cart, stand, tripod, surface that can Clip bracket, or table specified by the support the weight manufacturer, or sold with the of the unit. To secure Hooks apparatus. When a cart is used, use the TV, use a sturdy caution when moving the cart/apparatus strap from the hooks Screw combination to avoid injury from tip-over. on the rear of the TV Band 13) Unplug this apparatus during lightning pedestal to a wall TV side TV top storms or when unused for long periods stud, pillar or other of time. immovable structure. Make sure the strap is tight, secure, and parallel to the floor. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged 23) Never expose the apparatus to dripping or splashing in any way, such as power-supply cord or plug is damaged, liquid or place items such as vases, aquariums, any liquid has been spilled or objects have fallen into the other item filled with liquid, or candles on top of the TV. apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 24) Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Additional Safety Precautions Never place the TV: 14a) CAUTION: If the TV is dropped and the cabinet or • on a bed, sofa, rug, or similar surface; enclosure surface has been damaged or the TV does • too close to drapes, curtains, not operate normally, take the following precautions: or walls; or • ALWAYS turn off the TV and unplug the power • in a confined space such as cord to avoid possible electric shock or fire. a bookcase, built-in cabinet, • NEVER allow your body to come in contact with or any other place with poor ventilation. any broken glass or liquid from the damaged television. The LCD panel inside the TV contains The slots and openings are provided to protect the TV from glass and a toxic liquid. If the liquid comes in contact overheating and to help maintain reliable operation of the TV. with your mouth or eyes, or your skin is cut by Leave a space of at least 4 inches around the TV. broken glass, rinse the affected area thoroughly with water and consult your doctor. 25) Always place the back of the television at least four • ALWAYS contact a service technician to inspect (4) inches away from any vertical surface (such as a the TV any time it has been damaged or dropped. wall) to allow proper ventilation. 14b) WARNING: To prevent the spread of fire, keep candles or other open flames away from this product 26) Never allow anything to rest on or roll over the power at all times. cord, and never place the TV where the power cord 15) WARNING: NEVER expose batteries to excessive is subject to wear or abuse. heat such as sunshine, fire, or the like. 4 52G0101A P02-05.indd 4 1/6/09 4:00:02 PM

SAFETY INSTRUCTIONS (Continued) Installation (cont. from previous page) Care (cont. from previous column) 27) Never overload wall outlets and extension cords. 33) While it is thundering, do not touch the connecting 28) Always operate the TV with a 120V AC, 60Hz power cables or apparatus. source only. 34) For added protection of your TV from lightning and Introduction CAUTION: To reduce the risk of electric shock, do not use the power surges, always unplug the power cord and polarized plug with an extension cord, receptacle, or other outlet disconnect the antenna from the TV if you leave the unless the blades can be inserted completely with three-wire TV unattended or unused for long periods of time. grounding type to prevent blade exposure. 35) ALWAYS unplug the TV to completely disconnect 29) Always make sure the antenna system is properly from mains power. When the TV is turned off using grounded to provide adequate protection against the on/off switch, it is not completely disconnected voltage surges and built-up static charges (see from power and a minute amount of current is still Section 810 of the National Electric Code.) consumed. 36) During normal use, the TV may make occasional Antenna snap ping or popping sounds. This is normal, lead-in wire especially when the unit is being turned on or off. Ground clamp Antenna discharge unit If these sounds become frequent or continuous, (NEC Section 810-20) unplug the power cord and contact a Toshiba Electric service Authorized Service Center. equipment Grounding conductors (NEC Section 810-21) Ground clamps 37) Keep your fingers well clear of the disc slot as it is closing. Power service grounding Failure to do so may cause serious personal injury. electrode system (NEC Art 250 Part H) 38) When you use headphones, keep the volume at a moderate level. Using headphones continuously at a high volume may cause hearing damage. 30) DANGER: RISK OF SERIOUS PERSONAL INJURY OR DEATH! 39) NEVER look directly into the disc slot or ventilation • Use extreme care to make sure you slots at the source of the laser beam. Doing so are never in a position where your body may cause sight damage. (or any item you are in contact with, 40) NEVER use a cracked, deformed, or repaired disc. such as a ladder or screwdriver) can Such discs are easily broken and may cause serious accidentally touch overhead power lines. personal injury or product damage. SUCH DAMAGE Never locate the antenna near overhead IS NOT COVERED UNDER YOUR WARRANTY. power lines or other electrical circuits. 41) WARNING: RISK OF SERIOUS PERSONAL • Never attempt to install any of the following INJURY OR EQUIPMENT DAMAGE! during lightning activity: a) an antenna system; or • Never strike the screen with a sharp or heavy object. b) cables, wires, or any home theater component • Never touch, press, or place anything on the connected to an antenna or phone system. LCD screen. These actions will damage the LCD screen If you need to clean the LCD screen, Care follow the instructions in item 31 on this page. For better performance and safer operation of your Service TOSHIBA TV, follow these recommendations and precautions: 42) WARNING: RISK OF ELECTRIC 31) Always unplug the TV before cleaning. SHOCK! Never attempt to service Wipe the display panel the TV yourself. surface gently using only Opening and removing the covers a soft cloth (supplied.) A may expose you to dangerous voltage or other hard cloth may damage the hazards. Failure to follow this WARNING may surface of the panel. Avoid result in death or serious injury. contact with alcohol, Refer all servicing to a Toshiba Authorized thinner, benzene, acidic or Service Center. and alkaline solvent cleaners, abrasive 43) If you have the TV serviced: cleaners, or chemical cloths, which may damage • Ask the service technician to use only replacement the surface. Never spray volatile compounds such parts specified by the manufacturer. as insecticide on the cabinet. Such products may • Upon completion of service, ask the service damage or discolor the cabinet. technician to perform routine safety checks to determine that the TV is in safe operating condition. 32) WARNING: RISK OF ELECTRIC SHOCK! Never spill liquids or push objects of 44) When the TV reaches the end of its useful life, any kind into the TV cabinet slots. ask a qualified service technician to properly dispose of the TV. 5 52G0101A P02-05.indd 5 1/6/09 4:00:04 PM

Introduction Precautions Choosing a location for your LCD TV Important notes about your LCD TV ■ Retractable pedestal stand and locating the LCD TV The following symptoms are technical limitations of LCD Observe the following safety precautions: Display technology and are not an indication of malfunction; therefore, Toshiba is not responsible for perceived defects 1) Ensure that unpacking and transfer of the unit is carried out by resulting from these symptoms. two or more people. 2) Put the LCD TV on a large level area in a recumbent posture. 1) An after image (ghost) may appear on the screen if a fixed, 3) Grab the pedestal stand and lift the display up. Confirm the pivot is non-moving image is displayed for a long period of time. locked. The after image is not permanent and will disappear in a short 4) Place the TV on a sturdy, level surface that period of time. can support the weight of the TV. 2) The LCD panel contained in this TV is manufactured using an 5) Be sure to secure the TV to a wall stud, extremely high level of precision technology; however, there may pillar, surface, or other immovable be an occasional pixel (dot of light) that does not operate properly structure. To secure the TV in this manner: (does not light, remains constantly lit, etc.). This is a structural (1) attach a clip to an immovable structure, property of LCD technology, is not a sign of malfunction, and is then (2) pass a sturdy strap through the clip not covered under your warranty. Such pixels are not visible and attach each end to the hooks located when the picture is viewed from a normal viewing distance. at the back of the TV. Be sure to leave at least 4 inches between Note: Interactive video games that involve shooting a “gun” type the TV and the wall or similar structure for ventilation. See item of joystick at an on-screen target may not work on this TV. 19, page 4 for additional details. ■ To fold the pedestal stand 1) Slide the lever on the back side of the pedestal stand to the left. Notes on handling 2) Lay the display down. Slide the lever to the left ■ Do not subject the LCD panel to physical shock, such as dropping it. It may cause unit damage and malfunction. ■ When shipping the unit, the original shipping carton and packing materials come in handy. For fully protection, repack the unit as it was originally packed at the factory. ■ Do not use volatile liquids, such as insecticide, near the unit. Do not leave rubber or plastic products in contact with the unit for prolonged periods of time. Back side of the pedestal stand Doing so will leave marks on the finish. NOTE: Do not operate the LCD TV while the pedestal stand ■ The top and rear panels of the unit may become warm after a long is folded. period of use. This is not a malfunction. ■ When the unit is not in use, always remove the disc and turn off ■ To Display your LCD TV using a Wall Bracket: the power. If you decide to wall mount your LCD TV, always use a UL Listed wall bracket appropriate for the size and weight of the LCD TV (see page 2): 1) CAUTION: Two people are required for installation. Notes on locating the unit 2) Unplug and remove any cables and/or other component ■ When you place this unit near a TV, radio, or VCR, the playback connectors from the rear of the TV. picture may become poor and the sound may be distorted. In this 3) Follow the instructions provided with your wall bracket. case, place the unit away from the TV, radio, or VCR. Before proceeding, make sure the appropriate bracket(s) are ■ To avoid damage to this product, never place or store the attached to the wall and the back of the TV as described in the TV/DVD in direct sunlight; hot, humid areas; or areas subject to instructions provided with the wall bracket. excessive dust or vibration. 4) After attaching the appropriate bracket(s) to the wall and the back ■ The socket-outlet must be installed near the unit and easily of the TV, remove the pedestal stand from the TV as described accessible. below. ■ Removing the Pedestal Stand 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface. NOTE: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel. 2) Remove the two screws shown in the diagram below. This will allow removal of the pedestal stand. 3) Once you have removed all two screws holding the pedestal stand in place, remove the pedestal stand from the TV by sliding the pedestal stand away from the TV. Two screws 6 52G0101A P06-07.indd 6 1/5/09 3:01:07 PM

Precautions (Continued)/Notes on discs Notes on moisture condensation On handling discs Moisture condensation damages the unit. Please Do not touch the playback side of the disc. read the following carefully. For example, handle the disc so that it is shown in Introduction Moisture condensation occurs, for example, when you figure below. pour a cold drink into a glass on a warm day and drops of water form on the outside of the glass. In the same way, moisture may condense on this unitʼs internal optical pick-up lens, one of the most crucial internal parts of the unit. Playback side Do not attach paper or tape to discs. le of mo Examp ensat isture cond ion! Optical pick-up On cleaning discs lens Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center ■ Moisture condensation may occur in the following outwards with a soft cloth. Always keep the disc situations: clean. When you move the unit from a cold area to a warm area. When you use the unit in a room in which the heat was just turned on. Do not use any type of solvent such as thinner, benzine, commercially available cleaners or antistatic When you use the unit in an area where cold air from spray for vinyl LPs. It may damage the disc. an air conditioner directly hits the unit. On storing discs When you use the unit in a humid area. Do not store discs in a place subject to direct sunlight or near heat sources. Do not store discs in places subject to moisture and dust such as a bathroom or near a humidifier. Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping. Structure of disc contents Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and ■ Never use the unit when moisture condensation Audio CDs are divided into tracks. may occur DVD video disc Using the unit when moisture condensation exists may DVD video disc damage discs and internal parts. Connect the power Title 1 Title 2 cord of the unit to the wall outlet, turn on the unit, Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3 remove the disc, and leave it for two or three hours. After two or three hours, the unit will have warmed up and evaporated any moisture. Leaving the TV connected to the wall outlet will help prevent moisture condensation in the TV or DVD Player. Video CD/Audio CD Video CD/Audio CD Wa Track 1 Track 2 Track 3 Track 4 Track 5 it! Wall outlet Each title, chapter or track is assigned a number, which is called “title number”, “chapter number” or “track number” respectively. There may be discs that do not have these numbers. 7 52G0101A P06-07.indd 7 1/5/09 3:01:13 PM

Introduction Notes on discs (Continued) Notes on copyright Playable discs The unauthorized recording, use, distribution, or revision This unit can play the following discs. of copyrighted materials including, without limitation, television programs, videotapes, and DVDs, is prohibited Disc Maximum Disc Mark Contents Size playback time under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. Approx. 4 hours (single sided disc) Audio 12 cm Approx. 8 hours About this ownerʼs manual DVD video + Video (double sided disc) discs (moving Approx. 80 minutes This ownerʼs manual explains the basic instructions of this pictures) (single sided disc) 8 cm unit. Some DVD video discs are produced in a manner Approx. 160 minutes that allows specific or limited operation during playback. As (double sided disc) such, the unit may not respond to all operating command. Audio Approx. 74 minutes This is not a defect in the unit. Refer to instruction notes of + 12 cm (single sided disc) discs. Video Video CDs DIGITAL VIDEO (moving Approx. 20 minutes The following symbol may appear on the TV screen during pictures) 8 cm (single sided disc) operation. Approx. 74 minutes 12 cm Audio (single sided disc) It means that the operation is not permitted by the TV/DVD Audio CDs Approx. 20 minutes or the disc. 8 cm (single sided disc) For example, sometimes it is unable to stop the playback of copyright message of the disc when the STOP (■) Audio 12 cm + button is pressed. Alternatively, this symbol may also DivX ® Video It depends on DivX® indicate that the feature is not available for the disc. (moving quality 8 cm pictures) Notes on region numbers The following discs are also available. DVD-R/RW discs of DVD video format The region number of this unit is 1. If region numbers, CD-R/CD-RW discs of CD-DA, Video CD, MP3, WMA, which stand for their playable area, are printed on your JPEG or DivX® format DVD video disc and you do not find 1 or ALL , disc Kodak Picture CD and FUJICOLOR CD format playback will not be allowed by the player. (In this case, Some of these discs may be incompatible. the unit will display a message on-screen.) Some DVDs that have no region code label may still be • You cannot play discs other than those listed above. subject to area restrictions and therefore not playable. • You cannot play discs of DVD-RAM, DVD-ROM, CD- ROM, Photo CD, etc., or non standardized discs even if they may be labeled as above. On Video CDs • Some CD-R/RWs cannot be played back depending on the recording conditions. This unit supports Video CDs equipped with the PBC • This unit uses the NTSC color system, and cannot (Version 2.0) function. (PBC is the abbreviation of play DVD video discs recorded in any other color Playback Control.) You can enjoy two playback variations system (PAL, SECAM, etc.). depending on types of discs. • This unit can play an 8cm disc. Please do not use a • Video CD not equipped with PBC function (Version 1.1) disc adapter. It may cause trouble. Sound and movie can be played on this unit in the same • Please do not insert any disc of an irregular shape into way as a DVD. the unit, as it may interfere with the function of the unit. • Video CD equipped with PBC function (Version 2.0) You may not be able to remove it. In addition to operation of a Video CD not equipped with • Please do not use after market accessories, such as a the PBC function, you can enjoy playback of interactive ring protector, as this may cause trouble with the software with search function by using the menu operation of the unit. displayed on the TV screen (Menu Playback). Some of the functions described in this ownerʼs manual may not Because of problems and errors that can occur during the work with some discs. creation of DVD and CD Software and/or the manufacture of DVD and CD discs, Toshiba cannot assure that the DVD player contained in this TV will successfully play every disc bearing the DVD and CD logos. If you happen to experience any difficulty playing a DVD and/or CD disc on the DVD player contained in this TV, please contact Toshiba Customer Service. is a trademark of DVD Format/Logo Licensing Corporation. 8 52G0101A.indb 8 1/5/09 3:02:00 PM

Contents Introduction Basic playback SAFETY INSTRUCTIONS.................................4 Playing a disc ................................................. 47 Precautions........................................................6 Introduction Notes on discs ...................................................7 Advanced playback Contents ............................................................9 Zooming.......................................................... 50 Identification of controls ..................................10 Locating desired scene................................... 50 Marking desired scenes.................................. 51 Connections Repeat playback ............................................. 52 Antenna connections ...................................... 14 A-B Repeat playback ...................................... 52 Cable TV connections .................................... 15 Program playback........................................... 53 Connecting to optional equipment .................. 16 Random playback ........................................... 53 Power source.................................................. 21 Changing angles..............................................54 Title selection ...................................................54 DVD menu .......................................................54 Basic setup Changing soundtrack language .......................55 Auto Setup ...................................................... 22 Subtitles ...........................................................55 Setting the language....................................... 23 Disc status .......................................................56 To memorize channels.................................... 24 To turn off the PBC ..........................................56 MP3/WMA/JPEG/DivX® TV operation and Audio CD operation ..................................57 TV operation ................................................... 27 Repeat, random and program playback Labeling channels........................................... 29 using file browser.............................................61 Labeling video inputs ...................................... 30 Setting the V-Chip........................................... 31 Function setup Setting the closed captions............................. 35 Customizing the function settings ....................63 CC advanced .................................................. 36 Temporary cancel the rating level Adjusting the picture preference ..................... 37 by DVD disc .....................................................68 Picture settings ............................................... 37 Viewing the wide-screen picture formats ........ 38 Others Film Mode ....................................................... 39 DNR ................................................................ 39 Understanding the Power Return feature ........69 Picture control adjustment in the PC mode .... 40 Troubleshooting ...............................................69 Sound control adjustment ............................... 41 Reception disturbances ...................................71 Selecting Stereo/Second Audio Program (SAP) .... 41 Language code list ..........................................72 Selecting the audio language ......................... 42 Specifications ..................................................73 Selecting the HDMI audio input source .......... 42 Limited United States Warranty .......................74 Using the aspect feature................................. 43 Turning off the built-in speakers (26LV610U only) ............................................. 44 Checking the Digital-signal strength ............... 44 Setting the Logo Light..................................... 45 Setting the Auto Shut Off ................................ 45 Resetting your settings ................................... 46 9 52G0101A.indb 9 1/5/09 3:02:02 PM

Introduction Identification of controls Front Speaker Remote sensor 13 POWER indicator 22 Side Adjusting the angle of the base Left Side (except 26LV610U) Approx. 10° Approx. 3° EJECT button 48 Disc slot 47 VOLUME (+/–) buttons 27 CHANNEL 27 PLAY button 47 You can adjust the CHANNEL 27 angle of the ■ STOP button 47 TV-screen for 3° forward or for 10° MENU button 23 63 backward from vertical angle. Hold the base of the INPUT/ENTER button 16 TV while adjusting the angle. POWER button 22 10 52G0101A.indb 10 1/5/09 3:02:03 PM

Rear Introduction AC INPUT COVER (19LV610U/ 19LV611U only) AC INPUT 21 Antenna jack 14 15 HEAD PHONE jack 28 COAXIAL DIGITAL AUDIO OUT jack 18 19 COLORSTREAM HD/AUDIO IN jacks 17 HDMI IN jack 19 S-VIDEO/VIDEO/AUDIO IN jacks 16 17 PC AUDIO IN jack 19 20 Illustration of 19LV610U/ PC MONITOR IN jack 20 19LV611U/22LV610U/22LV611U AUDIO OUT (L/R) jacks 20 COAXIAL DIGITAL AUDIO PC IN jack 20 OUT jack 18 19 AC INPUT 21 Antenna jack 14 15 HDMI 1 IN jack 19 COLORSTREAM HD IN jacks 17 HDMI 2 IN jack 19 VIDEO IN jacks 16 17 HDMI 1/PC AUDIO IN jack 19 20 Illustration of 26LV610U AUDIO IN (L/R) jacks 16 17 S-VIDEO IN jack 17 11 52G0101A.indb 11 1/5/09 3:02:04 PM

Introduction Identification of controls (Continued) Remote control The instructions in this manual describe the function on the remote control. See the page in for details. EJECT button 48 POWER button 22 TV/DVD button 47 SLEEP button 28 Direct channel selection buttons (0-9) 27 Numbered buttons (0-9) 31 JUMP button 50 DISPLAY button 28 56 Direct channel selection button ( ) 27 CH / button 27 SUBTITLE button 55 AUDIO SELECT button 55 VOL +/– button 27 INPUT button 16 MUTE button 28 ZOOM button 50 PLAY MODE button 52 53 56 *DVD MENU button 54 ENTER button 22 PLAY button 47 Direction buttons ( / / / ) 22 MENU button 23 SETUP button 63 EXIT/CANCEL button 22 PAUSE button 48 CH RTN button 28 STOP button 47 SKIP ( ) button 49 CLOSED CAPTION button 35 SKIP ( )button 49 REV button 49 FF button 49 SLOW ( ) button 49 SLOW ( ) button 49 MARKER button 51 TOP MENU button 54 ANGLE button 54 RETURN button 58 63 REPEAT A-B button 52 GAME button 16 PIC SIZE button 38 *DVD MENU button Use the DVD MENU button to display the menu included on many DVD video discs. To operate a menu, follow the instructions in “DVD menu.” 54 12 52G0101A.indb 12 1/5/09 3:02:08 PM

Introduction Inserting batteries 1 Open the battery compartment cover in the direction of the 2 Install two “R03/AAA” batteries (supplied), paying attention to 3 Replace the compartment cover. arrow. the polarity indicated in the battery compartment. Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within 30° angle on either side of the remote sensor, up to a distance of approx. 5 meters. Approx. 5 meters Caution: • Never throw batteries into a fire. Note: • Be sure to use AAA size batteries. • Dispose of batteries in a designated disposal area. • Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations. • If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones. • When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix battery types or use new and used batteries in combination. • Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment. 13 52G0101A.indb 13 1/5/09 3:02:08 PM

Connections Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see page 15 for Cable TV connections. Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination Antenna Antenna jack VHF/UHF antenna to the antenna jack on the back jack of the TV/DVD. If your combination VHF/UHF antenna has a 300 75 ohm coaxial cable ohm twin-lead wire, use the 300-75 ohm matching (not supplied) transformer (not supplied). 300-75 ohm matching transformer (not supplied) Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires) Antenna Connect the UHF 300 ohm twin-lead wire to the jack 300-75 ohm matching combiner (not supplied). Connect the VHF 300 ohm transformer (not supplied) twin-lead wire to the 300-75 ohm matching transformer (not supplied). Attach the transformer to the combiner, then attach the combiner to the antenna jack on the back of the TV/DVD. Combiner (not supplied) UHF 300 ohm VHF 300 ohm twin-lead wire twin-lead wire (not supplied) (not supplied) Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires) Connect the VHF 75 ohm cable and UHF 300 ohm Antenna twin-lead wire to the combiner (not supplied). jack Attach the combiner to the antenna jack on the back of the TV/DVD. VHF 75 ohm (not supplied) Combiner (not supplied) UHF 300 ohm twin-lead wire (not supplied) 14 52G0101A P14-29.indd 14 1/5/09 3:02:49 PM

Cable TV connections This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company. For subscribers to basic cable TV service Antenna For basic cable service not requiring a converter/descrambler jack Connections box, connect the Cable TV 75 ohm coaxial cable directly to the Antenna jack on the back of the TV/DVD. 75 ohm coaxial cable For subscribers to scrambled cable TV service If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect the output jack of the converter/descrambler box to the antenna jack on the TV/DVD. Follow the connections shown below. Set the TV/DVD to the output channel of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to select channels. Incoming 75 ohm 75 ohm cable to Antenna jack Cable TV TV/DVD Converter/ descrambler For subscribers to unscrambled basic cable TV service with scrambled premium channels If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the use of a converter/descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the cable company or an electronics supply store). Follow the connections shown below. With the switch in the “B” position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the “A” position, tune your TV/DVD to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to tune scrambled channels. Converter/ Incoming descrambler 75 ohm Antenna 75 ohm cable jack Cable TV to TV/DVD Splitter A/B switch A B 15 52G0101A P14-29.indd 15 1/5/09 3:02:51 PM

Connections Connecting to optional equipment 0-7 You can enjoy VCR, camcorder or TV game with connection to external input. INPUT GAME Using the audio/video inputs Press INPUT to view a signal from another device connected to your TV/ Source Selection Source Selection DVD, such as a VCR player. You can select TV, Video (Video1, 2), 0.TV 1.Video 0.TV 1.Video1 ColorStream HD, HDMI (HDMI1, 2) or PC depending on which input jacks 2.ColorStream HD 3.HDMI 2.Video2 3.ColorStream HD you used to connect your devices. 4.PC 4.HDMI1 5.DVD 5.HDMI2 6.PC 7.DVD Press INPUT on the remote control to display the current signal source. [0-5]:Select [0-7]:Select To change the input source, press INPUT again or press Number buttons. (26LV610U only) Connecting to a VCR To playback from the VCR, connect the VCR to the TV/DVD as shown. Select the “Video” (“Video1”) by pressing INPUT repeatedly. Back side : Signal flow VCR (yellow) (white) (red) To Audio/Video OUT To AUDIO/VIDEO IN Audio/Video cable (not supplied) Connecting to a camcorder To playback from the camcorder, connect the camcorder to the TV/DVD as shown. Select the “Video” (“Video1”) by pressing INPUT repeatedly. Back side : Signal flow Camcorder (yellow) (white) To Audio/Video OUT (red) To AUDIO/VIDEO IN Audio/Video cable (not supplied) Connecting to a TV Game You can enjoy playing a TV game on the screen by adjusting to the suitable brightness for your eyes. 1. Connect a TV Game to the TV/DVD. 2. Select the Game mode by pressing GAME. The Game mode screen appears. • If GAME is pressed during standby mode, the unit turns on automatically and the Game mode screen appears on the screen. Back side : Signal flow (yellow) (white) (red) To Audio/Video OUT To AUDIO/VIDEO IN Audio/Video cable (not supplied) Note: • The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different types of signal generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. Youʼll need to consult each componentʼs Ownerʼs Manual for additional information. • Interactive video games that involve shooting a “gun” type of joystick at on-screen target may not work on this TV/DVD. 16 52G0101A P14-29.indd 16 1/5/09 3:02:52 PM

Connecting to an optional equipment with S-video output If you connect a VCR with an S-Video cable to the S-VIDEO IN jack on the rear of the TV/DVD, you must also Connections connect the audio cables to the AUDIO IN jacks as shown below. The S-Video cable only carries the video sig- nal. The audio signal is separated. Select the “Video” (“Video1”) by pressing INPUT repeatedly. : Signal flow Back side Ex. VCR with S-Video (playback) (white) (red) To S-VIDEO OUT To Audio (L/R) OUT Audio cable (not supplied) To AUDIO (L/R) IN S-Video cable (not supplied) To S-VIDEO IN Note: • When the S-Video cable and the standard video cable are connected at the same time, the S-video cable takes precedence. Connecting an optional equipment with ColorStream® (Component video) output Your TV/DVD is capable of using ColorStream® (component video). Connecting your TV/DVD to a component video compatible DVD player, such as a Toshiba DVD player with ColorStream® can greatly enhance picture quality and performance. Select the “ColorStream HD” by pressing INPUT repeatedly. Ex. DVD player with Component video To COLORSTREAM HD Back side (Y, Pb, Pr) IN : Signal flow To Component Video OUT To Audio (L/R) OUT Component video cable (not supplied) (white) (red) To COLORSTREAM Audio cable (not supplied) HD AUDIO (L/R) IN When using the Component video cable, an Audio cable must be connected to COLORSTREAM HD AUDIO(L/R) IN jacks. Note: • The ColorStream® (component video) inputs on this unit are for use with devices that output 480i, 1080i inter- laced signals and 480p, 720p progressive signals. • Refer to the ownerʼs manual of the connected equipment as well. • When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the unit away from the tuner and radio. 17 52G0101A P14-29.indd 17 1/5/09 3:02:53 PM

Connections Connecting to optional equipment (Continued) You can enjoy high quality dynamic sounds by connecting the * This section uses the following reference mark. TV/DVD to optional audio equipment. : Front speaker : Center speaker : Rear speaker : Signal flow : Sub woofer Connecting to an amplifier equipped with a Dolby® Digital decoder Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the Dolby Digital recording system with this dynamic realistic sound by connecting the TV/DVD to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. Back side Amplifier equipped with a To COAXIAL DIGITAL Dolby Digital decoder AUDIO OUT To COAXIAL type digital Manufactured under license audio input from Dolby Laboratories. Dolby and the double-D symbol 75 Ω coaxial cable (not supplied) are trademarks of Dolby Laboratories. Connecting to an amplifier equipped with a DTS® decoder Digital Theater Systems (DTS) DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs. If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs or audio CDs. Back side To COAXIAL DIGITAL Amplifier equipped with AUDIO OUT a DTS decoder Manufactured under license under U.S. Patent #: 5,451,942 & To COAXIAL other U.S. and worldwide type digital patents issued & pending. DTS audio input and DTS Digital Out are 75 Ω coaxial cable (not supplied) registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved. Connecting to an amplifier equipped with an MPEG audio decoder MPEG2 sound You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor. Back side To COAXIAL DIGITAL Amplifier equipped with an AUDIO OUT MPEG2 audio decoder To COAXIAL type digital audio input 75 Ω coaxial cable (not supplied) 18 52G0101A P14-29.indd 18 1/5/09 3:02:55 PM

Connecting to an amplifier equipped with a digital audio input 2 channel digital stereo You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker Connections system (right and left front speakers). Note: PCM audio is limited to DVD or CD playback. Back side Amplifier equipped with a To COAXIAL DIGITAL Digital audio input AUDIO OUT To COAXIAL type digital audio input 75 Ω coaxial cable (not supplied) Note: • DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD. • Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the “COAXIAL” input of a Receiver or Processor. • Refer to the ownerʼs manual of the connected equipment as well. • When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiverʼs volume to a moderate listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound. • Turn off the amplifier before you connect or disconnect the TV/DVDʼs power cord. If you leave the amplifierʼs power on, the speakers may be damaged. Connecting to an HDMI or a DVI device About HDMI HDMI (High Definition Multimedia Interface) supports both video HDMI has the capability to support standard, enhanced, or high- and audio on a single digital connection for use with DVD players, definition video plus standard to multi-channel surround-sound DTV, set-top boxes, and other AV devices. HDMI was developed audio. HDMI features include uncompressed digital video, a to provide the technologies of High Bandwidth Digital Content bandwidth of up to 2.2 gigabytes per second (with HDTV signals), Protection (HDCP) as well as Digital Visual Interface (DVI) in one one connector (instead of several cables and connectors), and specification. HDCP is used to protect digital content transmitted communication between the AV source and AV devices such as and received by DVI-compliant or HDMI-compliant displays. DTVs. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. Back side To HDMI 1/PC To DVI output AUDIO IN Audio cord (not supplied) HDMI - to - DVI adapter cable DVI device (HDMI type A connector) (not supplied) or HDMI cable (type A connector) HDMI device To HDMI IN (not supplied) To HDMI out Note: • You must select the corresponding audio input source (HDMI or DVI) on the menu screen (see ”Selecting the HDMI1 audio input source” on page 42 ). Otherwise you will only see the image with no sound. • When you connect the HDMI to a DVI device with a HDMI-to-DVI adapter cable, it only transfers the video signal, so it is necessary to use separate analogue leads to transfer the audio signals. • The HDMI-2-connection has no analogue audio input. If you want to connect a DVI appliance to it, you will not hear a sound through the TV loud speakers. If you want to hear the sound of a DVI appliance through the TV loud speakers then connect the DVI appliance to HDMI-1. (26LV610U only) 19 52G0101A P14-29.indd 19 1/5/09 3:02:56 PM

Connections Connecting to optional equipment (Continued) Connecting an analog audio system (26LV610U only) This connection allows you to use external speakers with an external audio amplifier to adjust the sound level. To control the audio: Turn on the TV and the stereo amplifier. Turn off the TV’s built-in speakers (see “Turning off the built-in speakers” on page 44 .) Note: To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set to a reasonable listening level. Back side To AUDIO OUT (L/R) Analog audio amplifier To AUDIO IN Connecting to a PC (Personal Computer) Before you connect this TV/DVD to your PC, change the adjustment of your PC’s Resolution and Refresh rate (60 Hz). Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR on the rear of the TV/DVD. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to the AUDIO connector of the PC AUDIO IN jack of the TV/DVD. You can also connect the PC with HDMI cable. If you use HDMI cable, you don’t have to connect the audio cord. If you use HDMI-to-DVI cable, please connect audio cord as same way as VGA cable. Select “PC” by pressing INPUT repeatedly (When you use HDMI cable, Select “HDMI”). Switch on the computer. The TV/DVD can operate as the computer monitor Back side Monitor Display modes MODE Resolution Refresh rate To PC IN VGA 640x480 60/72/75Hz VGA cable (not supplied) VGA 720x400 70Hz SVGA 800x600 56/60/72/75Hz XGA 1024x768 60/70/75Hz Audio cord (not supplied) WXGA 1280x768 60Hz WXGA 1280x720 60Hz To HDMI 1/PC AUDIO IN WXGA 1360x768 60Hz To return to normal mode or Press INPUT again. To HDMI IN HDMI-to-DVI adapter cable (not supplied) Note: • The on-screen displays will have a different appearance in PC mode than in TV mode. • If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV/DVD-screen. 20 52G0101A P14-29.indd 20 1/5/09 3:02:57 PM

Power source Connections Power source To use AC power source 1. Connect the AC cord plug into this TV/DVD’s AC INPUT jack. 2. Connect the AC cord into an AC outlet. AC Outlet Wider Hole and Blade AC 120V, 60Hz AC cord (supplied) Note: • Never connect the AC line cord plug to other than the specified voltage (120V 60Hz). Use the attached power cord only. • If the polarized AC cord does not fit into a non-polarized AC outlet, do not attempt to file or cut the blade. It is the user’s responsibility to have an electrician replace the obsolete outlet. • If you cause a static discharge when touching the unit and the unit fails to function, simply unplug the unit from the AC outlet and plug it back in. The unit should return to normal operation. • If the AC cord plug is plugged in for the first time, wait for approx. 5 seconds before pressing POWER. 21 52G0101A P14-29.indd 21 1/5/09 3:02:58 PM

Basic setup Auto Setup POWER The Auto Setup function helps to install your TV/DVD easily. It leads you the Language selection, Air/Cable selection and Automatic channel search. IMPORTANT: Make sure that the antenna or cable TV system connection is made! ENTER / / / EXIT/CANCEL Auto Setup To turn on the TV/DVD, press POWER. 1 • POWER indicator on the front of the unit changes green. It may take approx. 10 seconds 5 Now the “Automatic Search” starts. Auto Setup for a picture to appear on screen. Language English Signal Type Cable Automatic Search Start Analog Channel Found : 0 Digital Channel Found : 0 Auto Setup menu appears on the screen. 2 Programming Now Press ▲ or ▼ to select “Language”, then EXIT : End press ◀ or ▶ to select your desired language. • If you press EXIT/CANCEL, the Automatic Auto Setup Search stops and changes to the TV screen. Language English • After the starting setup is completed, the TV Signal Type Cable channel appears on the screen. Automatic Search Start Note: • The Auto Setup function will work only when you press POWER for the first time. • The process of “Automatic Search” may take 15 to : Select : Adjust 30 minutes to complete, depending on your regional Press ▲ or ▼ to select “Signal Type”, then cable service. 3 press ◀ or ▶ to select “Air” or “Cable”. Auto Setup Language English Signal Type Cable Automatic Search Start : Select : Adjust Air - VHF/UHF channels Cable - Cable TV channels Press ▲ or ▼ to select “Automatic Search”, 4 then press ▶ or ENTER. Auto Setup Language English Signal Type Cable Automatic Search Start : Select ENTER:Set 22 52G0101A P14-29.indd 22 1/5/09 3:02:58 PM

Setting the language POWER This TV/DVD can display the on screen language in English, French or Spanish. Select the language you prefer first, then proceed with the other menu options. MENU ENTER / / / EXIT/CANCEL Setting the language To turn on the TV/DVD, press POWER. Press ◀ or ▶ to select the desired language: 1 4 Basic setup • POWER indicator on the front of the unit English, French (Français) or Spanish changes green. It may take approx. 10 seconds (Español). for a picture to appear on screen. Press MENU. The TV menu screen will 2 appear. Press ▲ or ▼ to select “Setup”, then press ▶ or ENTER. Press EXIT/CANCEL to return to the normal Main Menu Picture 5 screen. Audio Channel Lock Setup Note: • If no buttons are pressed for more than about 60 seconds, the MENU screen will return to normal : Select ENTER:Set operation automatically. • The TV section has its own menu and the DVD Press ▲ or ▼ to select “Language”. 3 Setup section also has its own menu 63 . Closed Caption >> Language English Video Label >> Auto Shut Off Off Aspect On TOSHIBA Logo Light On Reset >> : Select : Adjust 23 52G0101A P14-29.indd 23 1/5/09 3:03:00 PM

Basic setup To memorize channels This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/DVDʼs memory. To use this TV/DVD with an antenna, set the Signal Type option to the Air mode. When shipped from the factory, this menu option is in ENTER the Cable mode. / / / EXIT/CANCEL MENU Air/Cable selection (digital channel only) Automatic search Press MENU in the TV mode. The TV menu Press MENU in the TV mode. The TV menu 1 screen will appear. Press ▲ or ▼ to select “Channel”, then press ▶ or ENTER. 1 screen will appear. Press ▲ or ▼ to select “Channel”, then press ▶ or ENTER. Main Menu Main Menu Picture Picture Audio Audio Channel Channel Lock Lock Setup Setup : Select ENTER:Set : Select ENTER:Set Press ▲ or ▼ to select “Auto Ch Memory”, 2 then press ▶ or ENTER. 2 Press ▲ or ▼ to select “Auto Ch Memory”, then press ▶ or ENTER. Channel Channel Add/Delete >> Add/Delete >> DTV Signal >> DTV Signal >> Auto Ch Memory >> Auto Ch Memory >> Ch Label >> Ch Label >> Press ▲ or ▼ to select “Signal Type”. 3 3 Press ▲ or ▼ to select “Automatic Search”, then press ▶ or ENTER. Auto Ch Memory Auto Ch Memory Signal Type Cable Signal Type Cable Automatic Search Start Automatic Search Stop Analog Channel Found : 0 Digital Channel Found : 0 Press ◀ or ▶ to select “Air” or “Cable”. 4 Programming Now : Select ENTER:Cancel The TV/DVD will begin memorizing all the Auto Ch Memory Signal Type Automatic Search Air Start 4 channels available in your area. Air - VHF/UHF channels Cable - Cable TV channels Press EXIT/CANCEL to return to the normal 5 screen. 24 52G0101A P14-29.indd 24 1/5/09 3:03:02 PM

ENTER / / / EXIT/CANCEL MENU Add/Delete channel You can select the channel that you want to skip. Basic setup Press MENU in the TV mode. The TV menu Press ▲ or ▼ to select the channel that you 1 screen will appear. Press ▲ or ▼ to select “Channel”, then press ▶ or ENTER. 4 want to skip. Add/Delete CH Signal Main Menu 2 Analog Add Picture 3 Analog Add 3-001 Digital Delete Audio 3-002 Digital Add Channel 4 Analog Delete Lock Setup : Select : Adjust : Select ENTER:Set Press ◀ or ▶ to select “Add” or “Delete”, Press ▲ or ▼ to select “Add/Delete”, then 5 whichever function you want to perform. 2 press ▶ or ENTER. Channel Add/Delete CH Signal 2 Analog Delete Add/Delete >> 3 Analog Add DTV Signal >> 3-001 Digital Delete Auto Ch Memory >> 3-002 Digital Add Ch Label >> 4 Analog Delete : Select : Adjust : Select ENTER:Set Repeat steps 4 - 5 for other channels you 3 Press ▲ or ▼ to select “Add/Delete”, then press ▶ or ENTER. 6 want to add or delete. Press EXIT/CANCEL to return to the normal Add/Delete Adding Channel Add/Delete >> >> 7 screen. Clear All >> : Select ENTER:Set 25 52G0101A P14-29.indd 25 1/5/09 3:03:03 PM

Basic setup To memorize channels (Continued) ENTER / / EXIT/CANCEL MENU Adding Channel (digital channel only) Clear All If you find a new channel unregistered, you can add the All channels are deleted from the channel memory. new channel into the channel memory. Tune in the new channel. 1 1 Press MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select “Channel”, then press ▶ or ENTER. Press MENU in the TV mode. The TV menu 2 screen will appear. Press ▲ or ▼ to select “Channel”, then press ▶ or ENTER. Main Menu Picture Audio Main Menu Channel Lock Picture Setup Audio Channel : Select ENTER:Set Lock Setup Press ▲ or ▼ to select “Add/Delete”, then : Select ENTER:Set 2 press ▶ or ENTER. Channel Press ▲ or ▼ to select “Add/Delete”, then 3 press ▶ or ENTER. Channel Add/Delete DTV Signal Auto Ch Memory >> >> >> Ch Label >> Add/Delete >> DTV Signal >> Auto Ch Memory >> : Select ENTER:Set Ch Label >> Press ▲ or ▼ to select “Clear All”, then press : Select ENTER:Set 3 ▶ or ENTER. Add/Delete Press ▲ or ▼ to select “Adding Channel”, 4 Adding Channel >> then press ▶ or ENTER. The new channel will Add/Delete >> Clear All >> be added into the channel memory. Add/Delete Adding Channel >> Add/Delete >> : Select ENTER:Set Clear All >> Press EXIT/CANCEL to return to the normal 4 screen. : Select ENTER:Set Press EXIT/CANCEL to return to the normal 5 screen. 26 52G0101A P14-29.indd 26 1/5/09 3:03:05 PM

TV operation TV operation POWER 0–9, – VOL +/– CH / ENTER TV operation To turn on the TV/DVD, press POWER. TO SELECT ANALOG CHANNELS 1 (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture 1-9: Press 1-9 as needed. Example, to select channel 2, press 2, then press to appear on screen.) ENTER. 10-99: Press the 2 digits in order. Example, to select channel 12, press 1, 2, then TV operation press ENTER. 100-125: Press the 3 digits in order. Example, to Adjust the volume level by pressing VOL + or – . select channel 120, press 1, 2, 0, then 2 The volume level will be indicated on the screen by orange bars. As the volume level increases, so press ENTER. do the number of bars. If the volume decreases, TO SELECT DIGITAL CHANNELS the number of orange bars also decreases. Press the first 3 digits, then press the – button, followed by the remaining number. Example, to select channel 015-001, press 0, 1, 5, –, 0, 0, 1. • If a channel is selected with only audio content, “Audio only” will be displayed on the screen. • If a channel is selected with a weak digital Set the Signal Type option to the appropriate signal, “Digital channel signal strength is low” 3 position (see “Air/Cable selection” on page 24 ). will be displayed on the screen. The same program may be available on either an analog channel or a digital channel. You may Air - VHF/UHF channels choose to watch either format. Cable - Cable TV channels • If a channel is selected to which you have not subscribed, “Digital channel is encrypted” will Press the Direct Channel Selection (0-9, –) be displayed on the screen. 4 buttons or CH / to select the channel. (If you press only channel number, channel VHF/UHF/CABLE CHANNELS selection will be delayed for a few seconds.) Air Cable VHF VHF 2-13 2-13 UHF STD/HRC/IRC 14-69 14-36 (A) (W) 37-59 (AA) (WW) 60-85 (AAA) (ZZZ) 86-94 (86) (94) 95-99 (A-5) (A-1) 100-135 (100) (135) 01 (5A) Note: • If a channel with no broadcast is selected, the sound will automatically be muted. • It may take a few seconds for a digital channel picture to appear on screen after being selected. 27 52G0101A P14-29.indd 27 1/5/09 3:03:07 PM

TV operation TV operation (Continued) SLEEP DISPLAY VOL +/– MUTE CH RTN TV operation (continued) ■ DISPLAY ■ SLEEP Press DISPLAY to display the current information on the To set the TV/DVD to S l e e p Ti m e r 0h 10m screen. turn off after a preset amount of time, press SLEEP on the remote control. The clock will count up 10 minutes for 62-001 HDTV Moving Picture1 CH-1 Sleep Timer Off each press of the SLEEP button (Off, 0h 10m, 0h 20m, ..., 2h 0m). After the sleep time is programmed, the Digital Air English No Program Information is available When the TV/DVD display will appear briefly every ten minutes to remind receives a digital signal, you that the sleep timer is operating. To confirm the the digital information Mono Full sleep timer setting, press SLEEP and the remaining time will be displayed for a few seconds. To cancel the 480i will appear. sleep timer, press SLEEP repeatedly until the display • Channel number • Station name turns to Off. • Channel label (if preset) • Broadcast program name • V-Chip rating • Signal type • Sleep timer • Audio language ■ HEAD PHONES (except 26LV610U) • Program guide • Picture size Insert a stereo headphones (not supplied) with a 1/8” mini • Resolution plug into the HEAD PHONE jack on the rear panel. 14 Sleep Timer If you connect headphones, the sound from TV/DVD Off Analog Cable speakers is muted. When the TV/DVD receives a analog signal, the analog information Mono Full 480i will appear. • Channel number • Channel label (if preset) • V-Chip rating • Signal type • Sleep timer • Audio information (Stereo, SAP or Mono) • Picture size • Resolution Press DISPLAY again to clear the call display. Note: • After a few seconds, DISPLAY screen will return to normal TV-operation automatically. ■ CH RTN This button allows you to go back to the last channel selected by pressing CH RTN. Press CH RTN again to return to the last channel you were watching. ■ MUTE Press MUTE to switch off the sound. The TV/DVD’s sound will be silenced and “Mute” will appear on the screen. The sound can be switched back on by pressing this button again or the VOL + or –. 28 52G0101A P14-29.indd 28 1/5/09 3:03:08 PM

Labeling channels Channel label appear with the channel number display each time you turn on the TV/DVD, select a channel, or press DISPLAY. You can choose any four characters to identify a channel. ENTER / / / EXIT/CANCEL MENU Labeling channels 1 Press MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select “Channel” menu, then press ▶ or ENTER. 4 Press ◀ or ▶ repeatedly until the character you want appears in the first space. Ch Label TV operation Channel Number 15-1 Main Menu Ch Label A Picture Label Clear >> Audio Channel Lock Setup : Select : Adjust ENTER:Set : Select ENTER:Set The characters rotation as follows: 2 - , () @ / + = - Press ▲ or ▼ to select “Ch Label”, then SPACE press ▶ or ENTER. The “Ch Label” menu will appear. If the character which you desire appears, press Channel ENTER. Add/Delete >> Repeat this step to enter the rest of the DTV Signal >> characters. Auto Ch Memory >> If you would like a blank space in the label name, you must choose the empty space from the list of Ch Label >> characters. 5 When you finish inputting the label name, : Select ENTER:Set 3 press EXIT/CANCEL to return to the normal Press ◀ or ▶ to select a channel you want to screen. label, then press ▼. Ch Label 6 Channel Number 15-1 Repeat steps 3-5 for other channel. You can Ch Label Label Clear >> assign a label to each channel. To clear a Ch Label : Select : Adjust After step 3 above, press ▲ or ▼ to select “Label Clear”, then press ▶ or ENTER. Note: • The channel labels will be reset after “Automatic Search” on page 24 . 29 52G0101A P14-29.indd 29 1/5/09 3:03:09 PM

TV operation Labeling video inputs The Video Label feature allows you to label each input source for your TV/DVD. ENTER / / / EXIT/CANCEL MENU Labeling video inputs 1 Press MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select “Setup”, then press ▶ or ENTER. 4 Press ◀ or ▶ to select the desired label for that input source. Video Label Video - Main Menu ColorStream HD SAT Picture HDMI - Audio Channel Lock Setup : Select : Adjust : Select ENTER:Set – : Uses the default label name VCR : Video cassette recorder 2 Press ▲ or ▼ to select “Video Label”, then press ▶ or ENTER. DVD DTV SAT : DVD video : Digital TV set-top box : Satellite box Setup CBL : Cable box Closed Caption >> HD : HDMI (only for HDMI input) Language English Press EXIT/CANCEL to return to the normal Video Label Auto Shut Off Aspect TOSHIBA Logo Light >> Off On On 5 screen. Reset >> : Select ENTER:Set 3 Press ▲ or ▼ to select an input which you want to label. Video Label Video - ColorStream HD - HDMI - : Select : Adjust Video Label Video 1 - Video 2 - ColorStream HD - HDMI 1 - HDMI 2 - : Select : Adjust (26LV610U only) 30 52G0101A P30-36.indd 30 1/5/09 3:04:00 PM

Setting the V-Chip An age limitation can be set to restrict children from viewing or hearing 0–9 violent scenes or pictures that you may choose to exclude. The restriction applies to “TV Rating” and “Movie Rating” if this data is transmitted. You may DISPLAY set this restriction separately. To use the V-Chip function, you must register a password. ENTER Notes: / / If you forget the password, press DISPLAY four times within five seconds while the TV is in password entering mode. This allows you to reset your password. MENU To register a password To change a password 1 Press MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select “Lock”, then press ▶ or ENTER. 1 Press MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select “Lock”, then press ▶ or ENTER. Main Menu TV operation Main Menu Picture Picture Audio Audio Channel Channel Lock Lock Setup Setup : Select ENTER:Set : Select ENTER:Set 2 Select and enter your password (4 digits) using Number buttons (0-9), then press ENTER. 2 Use Number buttons (0-9) to enter your pass- word, then press ENTER. Then Lock menu will appear. Lock Lock New Password ---- Password ---- [0-9] : Select ENTER:Set [0-9] : Select ENTER:Set 3 Enter the same password again to confirm, then press ENTER. The password is now registered. 3 Press ▲ or ▼ to select “Change Password”, then press ▶ or ENTER. The Change Password screen will appear. 4 Enter a new password using Number buttons Lock Confirm Password ---- (0-9), then press ENTER. Enter the same password again to confirm, then press ENTER. The new password is now registered. Change Password [0-9] : Select ENTER:Set New Password ---- Confirm Password ---- Note: • The V-Chip feature is available only for the U.S. V-Chip system. The Canadian V-Chip system is not supported. [0-9] : Select ENTER:Set 31 52G0101A P30-36.indd 31 1/5/09 3:04:03 PM

TV operation Setting the V-Chip (continued) 0–9 ENTER / / / MENU To set the V-Chip 1 Press MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select “Lock”, then press ▶ or ENTER. 4 Press ▲ or ▼ to select “V-Chip Set”, then press ▶ or ENTER. The V-Chip Set Menu appears. Lock Main Menu V-Chip On V-Chip Set >> Picture V-Chip Set (DTV) >> Audio Update >> Channel V-Chip Clear >> Lock Change Password >> Setup : Select ENTER:Set : Select ENTER: Set 5 Press ▲ or ▼ to select which rating will be 2 Use Number buttons (0-9) to enter your pass- used, then press ▶ or ENTER. Each rating word, then press ENTER. Then Lock menu will below will appear. appear. V-Chip Set Lock TV Rating >> Movie Rating >> Password ---- : Select ENTER: Set TV Rating [0-9] : Select ENTER:Set 3 TV Rating Press ▲ or ▼ to select “V-Chip”, then press ALL D L S V FV ◀ or ▶ to select “On” . TV-Y TV-Y7 TV-G Lock TV-PG TV-14 V-Chip On TV-MA V-Chip Set >> V-Chip Set (DTV) >> : Select ENTER:Set Update >> V-Chip Clear >> You can set the rating using age level and genre. Change Password >> Age: TV-Y : All children : Select : Adjust TV-Y7 : 7 years old and above TV-G : General audience TV-PG : Parental guidance TV-14 : 14 years old and above TV-MA : 17 years old and above Genre: ALL : All D : Dialogue L : Language S : Sex V : Violence FV : Fantasy Violence 32 52G0101A P30-36.indd 32 1/5/09 3:04:04 PM

0–9 MUTE ENTER / / / EXIT/CANCEL To clear the all V-Chip settings Movie Rating Movie Rating 1 Press MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select “Lock”, then press ▶ or ENTER. G TV operation PG Main Menu PG-13 R Picture NC-17 Audio X Channel Lock : Select ENTER:Set Setup : Select ENTER:Set G : All ages PG : Parental guidance 2 PG-13 : Parental guidance less than 13 years old Use Number buttons (0-9) to enter your pass- R : Under 17 years old parental guidance word, then press ENTER. Then Lock menu will suggested appear. NC-17 : 17 years old and above X : Adult only Lock 6 Press ▲/▼/◀/▶ to select the desired rating, Password ---- then press ENTER. [0-9] : Select ENTER:Set 3 Press ▲ or ▼ to select “V-Chip Clear”, then press ▶ or ENTER. 7 • The Password screen will appear. Press EXIT/CANCEL to return to the normal screen. V-Chip Clear Password ---- To use the TV/DVD after it is protected. When a program is received that is blocked by the V- [0-9] : Select ENTER:Set 4 Chip, press MUTE, then enter your password. The protection will be temporarily overridden. If the TV/ Use Number buttons (0-9) to enter your pass- DVD is turned off or the channel is changed, the V-Chip word, then press ENTER. All your settings restriction will be reactivated. return to the factory settings. Note: • The V-Chip function is activated only on programs and input sources that include a rating signal. 33 52G0101A P30-36.indd 33 1/5/09 3:04:05 PM

TV operation Setting the V-Chip (continued) As a supplement to the standard V-Chip rating system, your television will 0–9 be able to download an additional rating system, if such a system becomes available in the future. ENTER / / MENU To download the additional V-Chip rating system (when available) 1 Press MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select “Lock”, then press ▶ or ENTER. 6 You also need “Update” procedure to update rating information. Note: Main Menu • You can only download the additional V-Chip rating Picture system when your TV/DVD is receiving a digital signal. Audio • When you download the additional rating system, it Channel may take some time for the download to occur. Lock • The V-Chip rating information and system are not Setup determined or controlled by the TV/DVD. • The standard V-Chip rating system is available whether your TV/DVD is receiving a digital signal or : Select ENTER:Set not, and will block both analog and digital programs. 2 Use Number buttons (0-9) to enter your pass- To set the restriction level using the standard V-Chip word, then press ENTER. Then Lock menu will rating system, select “V-Chip Set” in step 3. appear. • The downloadable V-Chip rating system is an evolving technology, and availability, content, and format may Lock vary. Password • You cannot select this feature if the TV/DVD is not receiving a digital signal for the current station. ---- [0-9] : Select ENTER:Set 3 Press ▲ or ▼ to select “V-Chip Set (DTV)”, then press ▶ or ENTER. Lock V-Chip On V-Chip Set >> V-Chip Set (DTV) >> Update >> V-Chip Clear >> Change Password >> : Select : Adjust 4 If the TV/DVD is not storing the additional rating system, the TV/DVD will begin down- loading it, which may take some time to be completed. 5 Set your preferred content rating limits for the additional rating system. 34 52G0101A P30-36.indd 34 1/5/09 3:04:06 PM

Setting the closed captions WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display closed captioned television programs. Closed captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. ENTER / / / EXIT/CANCEL MENU CLOSED CAPTION Setting the closed captions 1 Press MENU in the TV mode. Press ▲ or ▼ to select “Setup”, then press ▶ or ENTER. 4 Press ▲ or ▼ to select “Analog Caption” or “Digital Caption”, then press ◀ or ▶ to select the desired Closed Caption mode. When you select “Analog Caption”, you can TV operation Main Menu choose C1, C2, C3, C4, T1, T2, T3 and T4. When you select “Digital Caption”, you can Picture choose from CS1, CS2, CS3, CS4, CS5 and CS6. Audio Channel Lock Closed Caption Setup CC Setting On : Select ENTER:Set CC Priority Digital CC Analog Caption C1 2 Digital Caption CS1 Digital CC Preset Default Press ▲ or ▼ to select “Closed Caption”, CC Advanced >> then press ▶ or ENTER. The Closed Caption menu will appear. : Select : Adjust 5 Press ▲ or ▼ to select “CC Priority”, then Setup Closed Caption >> press ◀ or ▶ to select “Digital CC” or “Analog Language English CC”. Video Label >> Auto Shut Off Off Aspect On TOSHIBA Logo Light On Reset >> : Select ENTER:Set 3 Press ▲ or ▼ to select “CC Setting”, then press ◀ or ▶ to select “On”. On: Captions will be displayed on the screen. Note: Off: Captions will not be displayed on the screen. • Depending on the broadcast signal, some Analog Captions will function with a Digital Closed Caption broadcast signal. This step prevent that two kind CC Setting Off of captions are overlapping. 6 CC Priority Digital CC Analog Caption C1 Press EXIT/CANCEL to return to the normal Digital Caption CS1 screen. Digital CC Preset Default CC Advanced >> : Select : Adjust Note: • You can also display the Closed Caption menu screen by pressing CLOSED CAPTION on the remote control. • Digital caption feature is not available for analog channel. Important Note: If text is not available in your viewing area, a black rectangle may appear on-screen. If this happens, set “CC Setting” to “Off”. 35 52G0101A P30-36.indd 35 1/5/09 3:04:07 PM

TV operation CC advanced When you have selected Custom as the display method, you can adjust the various setting listed below as follows: This feature is designed to customize Digital Captions only. ENTER / / / EXIT/CANCEL MENU CC advanced 1 Press MENU in the TV mode. Press ▲ or ▼ to select “Setup”, then press ▶ or ENTER. 5 Press ▲ or ▼ to select the desired item, then press ◀ or ▶ to change the setting. CC Advanced Main Menu Text Size Auto Picture Text Type Auto Text Edge Auto Audio Text Color Auto Channel Text Opacity Auto Lock Background Color Auto Setup Background Opacity Auto : Select : Adjust : Select ENTER:Set You can select from among the following items and parameters. 2 Press ▲ or ▼ to select “Closed Caption”, then press ▶ or ENTER. The Closed Caption menu will appear. Text Size: Text Type: Auto, Small, Standard, Large Auto, Style1, Style2, Style3, Style4, Style5, Style6, Style7 Text Edge: Auto, None, Raised, Depressed, Uniform, Left Shadow, Right Setup Closed Caption Language >> English Shadow Video Label >> Text Color: Auto, Black, White, Red, Green, Auto Shut Off Off Blue, Yellow, Magenta, Cyan Aspect On TOSHIBA Logo Light On Text Opacity: Auto, Solid, Transparent, Reset >> Translucent, Flashing : Select ENTER:Set Background Auto, Black, White, Red, Green, 3 Color: Blue, Yellow, Magenta, Cyan Press ▲ or ▼ to select “Digital CC Preset”, Background Auto, Solid, Transparent, then press ◀ or ▶ to select “Custom”. Opacity: Translucent, Flashing 6 Closed Caption Press EXIT/CANCEL to return to the normal screen. CC Setting On CC Priority Digital CC Analog Caption C1 Digital Caption CS1 Digital CC Preset Custom CC Advanced >> Note: : Select : Adjust 4 • You cannnot select “CC Advanced” in the menu Press ▲ or ▼ to select “CC Advanced”, then before set “Digital CC Preset” to “Custom”. press ▶ or ENTER. • You cannot set the Closed Caption “Text Color” and The CC Advanced menu will appear. “Background Color” as the same color. Closed Caption CC Setting On CC Priority Digital CC Analog Caption C1 Digital Caption CS1 Digital CC Preset Custom CC Advanced >> : Select ENTER:Set 36 52G0101A P30-36.indd 36 1/5/09 3:04:09 PM

Adjusting the picture preference/ Picture settings You can select four picture modes—Sports, Standard, Movie and Memory— as described in the following table: Picture settings are factory preset but you can adjust them individually as ENTER follows: / / / EXIT/CANCEL MENU Adjusting the picture preference Picture settings 1 Press MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select “Picture”, then press ▶ or ENTER. 1 Press MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select “Picture”, then press ▶ or ENTER. Main Menu 2 Press ▲ or ▼ to select “Picture Setting”, then press ▶ or ENTER. TV operation Picture The Picture Setting menu will appear. Audio Channel Picture Lock Picture Setting >> Setup Picture Preference Sports Picture Size >> : Select ENTER:Set Film Mode On PC Setting >> DNR On 2 Press ▲ or ▼ to select “Picture Preference”. : Select ENTER:Set Picture Picture Setting >> 3 Press ▲ or ▼ to select the item you want to adjust. Press ◀ or ▶ to adjust the setting. Picture Setting Picture Preference Sports Picture Size >> Brightness 25 Film Mode On Contrast 50 PC Setting >> Sharpness 25 DNR On Color 25 Tint 0 : Select : Adjust Color Temperature Cool 3 Backlight 16 Press ◀ or ▶ to select a mode you want to : Select : Adjust ENTER:Set adjust. ◀ ▶ Brightness decrease increase Picture brightness brightness Picture Setting >> Contrast decrease increase Picture Preference Standard contrast contrast Sharpness makes picture makes picture Picture Size >> Film Mode On PC Setting >> softer clearer DNR On Color be pale color be brilliant color : Select : Adjust Tint be reddish color be greenish color Mode Picture Quality Backlight decrease increase Sports Bright and dynamic picture (factory-set) brightness brightness Standard Standard picture quality (factory-set) Color Temperature Picture Quality Movie Movie-like picture setting (factory-set) Cool Bluish Memory Your personal preferences (set by Standard Neutral you; see “Picture settings” at right). Warm Reddish 4 After your desired setting, press EXIT/ CANCEL to return to the normal screen. 4 Note: After your desired setting, press EXIT/ CANCEL to return to the normal screen. • The Contrast default setting is set to maximum at the factory. 37 52G0101A P37-46.indd 37 1/5/09 3:04:43 PM

TV operation Viewing the wide-screen picture formats 0-4 You can view programs in a variety of picture sizes— Natural, Theater Wide1, Theater Wide2, Theater Wide3, Full and Native. ENTER / / EXIT/CANCEL PIC SIZE Viewing the wide-screen picture formats 1 Press MENU. Press ▲ or ▼ to select “Picture”, then press ▶ or ENTER. Theater Wide2 picture size (for letter box programs) 2 The entire picture is uniformly enlarged—it is stretched Press ▲ or ▼ to select “Picture Size”, then the same amount both wider and taller (retains its press ▶ or ENTER to display Picture Size original proportion). menu. Press ▲/▼ or corresponding Number button (0-4) to select the desired picture size, The top and bottom edges of the picture may be hidden. as described below. Picture Size 0.Natural 1.Theater Wide1 ABCDEFG---------------- 2.Theater Wide2 3.Theater Wide3 Theater Wide3 picture size (for letter box programs with subtitles) 4.Full To fill the width of the screen, it is extended horizontally. However; it is only slightly extended at the top and the bottom. [0-4]:Select Note: • Selectable picture sizes may vary depending on the The top and bottom edges of the picture may be hidden. input source or broadcast signal. • You can choose the Native Picture size when your PC mode is at PC mode/HDMI mode with PC. • Picture Size menu also can be displayed by pressing PIC SIZE on the remote control. 3 ABCDEFG---------------- Press EXIT/CANCEL to return to the normal ABCDEFG-------------------------- screen. Full picture size (for 16:9 source programs) Full will display the picture at the maximum size. Natural picture size In some cases, this image will display the size of standard 4:3 with a black side bar. Native picture size (for PC mode/HDMI mode with PC) When you connect the PC via PC jack or HDMI jack, you can also select the “Native” mode. “Native” mode can display dot-per-dot picture. Theater Wide1 picture size (for 4:3 format programs) To fill the screen, the right and left edges are extended, however; the center of the picture remains near its former ratio. The top and bottom edges of the picture may be hidden. Note: • Some High Definition and/or Digital broadcasts may not allow you to change the picture size. • In 720p, 1080i or 1080p signal, only the Theater Wide2 and Full picture size features are available. • In PC Mode, only the Natural, Full and Native picture size features are available. Additionally this feature will not work when display mode is WXGA. 38 52G0101A P37-46.indd 38 1/5/09 3:04:45 PM

Film Mode/DNR A smoother motion may be obtained by setting the Film Mode to “On” when you view a DVD. DNR (Digital Noise Reduction) can reduce the roughness of the picture. ENTER / / / EXIT/CANCEL MENU Film Mode DNR 1 Press MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select “Picture”, then press ▶ or ENTER. 1 Press MENU in the TV mode. Then press ▲ or ▼ to select “Picture”, then press ▶ or ENTER. Main Menu Main Menu Picture TV operation Picture Audio Audio Channel Channel Lock Lock Setup Setup : Select ENTER:Set : Select ENTER:Set 2 Press ▲ or ▼ to select “Film Mode”. 2 Press ▲ or ▼ to select “DNR”. Picture Picture Picture Setting >> Picture Setting >> Picture Preference Sports Picture Preference Sports Picture Size >> Picture Size >> Film Mode On Film Mode On PC Setting >> PC Setting >> DNR On DNR On : Select : Adjust 3 : Select : Adjust 3 Press ◀ or ▶ to select “On” or “Off”. Press ◀ or ▶ to select “On” or “Off”. Picture Picture Picture Setting >> Picture Setting >> Picture Preference Sports Picture Preference Sports Picture Size >> Picture Size >> Film Mode On Film Mode Off PC Setting >> PC Setting >> DNR Off DNR On : Select : Adjust : Select : Adjust 4 Press EXIT/CANCEL to return to the normal screen. Note: • A smoother motion may be obtained by setting the Film Mode to “On” when you view a DVD from the DVD player connected with ColorStream (component video) inputs. 39 52G0101A P37-46.indd 39 1/5/09 3:04:46 PM

TV operation Picture control adjustment in the PC mode You can adjust to optimize the performance of the TV/DVD in the PC mode. INPUT ENTER / / / EXIT/CANCEL MENU Picture control adjustment in the PC mode 1 Press INPUT, then select the PC mode. 5 Press ◀ or ▶ to adjust the setting. 2 Press MENU. Then press ▲ or ▼ to select “Picture”, then press ▶ or ENTER. Main Menu Picture Audio Hor Position: To adjust the horizontal position of Channel the image on the PC mode. Lock Ver Position: To adjust the vertical position of Setup the image on the PC mode. : Select ENTER:Set Clock: To minimize any vertical bars or stripes visible on the screen background. Phase: This must be adjusted after the 3 Press ▲ or ▼ to select “PC Setting”, then frequency of the PC mode has press ▶ or ENTER. been set to 60Hz to optimize picture quality 20 . Picture Auto Adjust: To adjust the all PC settings automatically. 6 Picture Setting >> Picture Preference Sports Picture Size >> After adjusting, press ENTER to return to the Film Mode Off PC Setting menu. Then continue to adjust the PC Setting DNR >> Off other items. : Select ENTER:Set 4 Press ▲ or ▼ to select the desired item you 7 want to adjust. Press EXIT/CANCEL to return to the normal screen. PC Setting Hor Position 25 Ver Position 25 Clock 0 Phase 25 Auto Adjust >> Note: • When you connect the PC via HDMI input, select the input source “HDMI”. : Select : Adjust ENTER:Set • When you connect the PC via HDMI input, you can setting “Hor Position” and “Ver Position” only. • Whenever you change the PC display resolution settings and find that the characters of the PC input has rough edges or has some flickerings, please go to PC Setting and do an “Auto Adjust” to improve the display of the PC input. 40 52G0101A P37-46.indd 40 1/5/09 3:04:48 PM

Sound control adjustment/ Selecting Stereo/Second Audio Program (SAP) The multi-channel TV sound (MTS) feature provides high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language or other audio information. ENTER / / / EXIT/CANCEL MENU Sound control adjustment Selecting Stereo/Second Audio Program (SAP) (analog 1 Press MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select channel only) 1 “Audio” , then press ▶ or ENTER. Press MENU in the TV mode. Press ▲ or ▼ to Main Menu select “Audio”, then press ▶ or ENTER. TV operation Picture Audio Main Menu Channel Picture Lock Audio Setup Channel : Select ENTER:Set Lock Setup : Select ENTER:Set 2 Press ▲ or ▼ to select the item you want to adjust. Then press ◀ or ▶ to adjust each 2 setting. Press ▲ or ▼ to select “MTS”, then press ◀ or Audio ▶ to select “Stereo”. Bass 15 Treble 15 Audio Balance 0 Bass 15 MTS Stereo Treble 15 Surround Off Balance 0 Audio Language No Info. MTS Stereo Surround Off : Select : Adjust Audio Language No Info. : Select : Adjust Bass: Press ◀ or ▶ to adjust the bass Treble: sound. Press ◀ or ▶ to adjust the treble sound. 3 Press EXIT/CANCEL to return to the normal screen. Balance: Press ◀ or ▶ to obtain an equal sound level from both speakers. Surround: Press ◀ or ▶ to select “On” or “Off”. Note: On: The dynamic presence and • Generally you can leave your TV in stereo mode sound created offers a thoroughly because the TV automatically outputs the type of enjoyable listening experience. sound being broadcast (stereo or mono). Off: Normal sound. • If the stereo sound is noisy, select “Mono” to reduce the noise. 3 After your desired setting, press EXIT/CANCEL to return to the normal screen. To listen to a second audio program (SAP) Press ◀ or ▶ to select “SAP” in step 2 above. The TV speakers will output the second audio program instead of normal audio. Note: • Virtual Surround feature is not effective in the monaural audio of the tuner and external input. 41 52G0101A P37-46.indd 41 1/5/09 3:04:49 PM

TV operation Selecting the audio language/ 0-6 Selecting the HDMI audio input source When two or more audio languages are included in a digital signal, you can select one of the audio language. (This function is available only for digital broadcast.) ENTER / / / When you use PC AUDIO IN jacks with HDMI or DVI device, you must select HDMI audio input source from “HDMI” or “DVI”. EXIT/CANCEL MENU Selecting the audio language Selecting the HDMI audio input source 1 Press MENU in the TV mode. Then press ▲ or 1 ▼ to select “Audio” , then press ▶ or ENTER. Press MENU in the HDMI1 mode (only for 26LV610U, the rest of the models are “HDMI Main Menu mode”). The TV menu screen will appear. Picture Press ▲ or ▼ to select “Audio” , then press ▶ Audio or ENTER. Channel Main Menu Lock Setup Picture Audio : Select ENTER:Set Channel Lock Setup 2 Press ▲ or ▼ to select “Audio Language”, : Select ENTER:Set then press ▶ or ENTER to display the Audio Language menu. Audio Bass Treble 15 15 2 Press ▲ or ▼ to select “HDMI1 Audio”(only for 26LV610U, the rest of the models are “HDMI Audio”). Then press ◀ or ▶ to select Balance 0 “HDMI” or “DVI”. MTS Stereo Surround Off Audio Audio Language English HDMI1 Audio HDMI : Select ENTER:Set Speakers On 3 Press ▲/▼ or Number buttons (0-6) to select your desired language. : Select : Adjust Audio Language 0. English HDMI: When you connect the HDMI device to 1. Language 1 2. Language 2 the TV, select this setting. 3. French 4. Language 3 DVI: When you connect the DVI device to the 5. Spanish TV with analog audio cords, select this 6. No Info. setting. 3 Press EXIT/CANCEL to return to the normal [0-6]: Select 4 screen. After your desired setting, press EXIT/CANCEL to return to the normal screen. 42 52G0101A P37-46.indd 42 1/5/09 3:04:50 PM

Using the aspect feature When the Aspect feature is set to On and the TV receives a 480i signal, the picture size is automatically selected (as described in the following table). ENTER / / / EXIT/CANCEL MENU Using the aspect feature 1 Press MENU in the Video or ColorStream HD mode. The TV menu screen will appear. Press ▲ or ▼ to select “Setup” , then press ▶ or ENTER. TV operation Main Menu Picture Audio Channel Lock Setup : Select ENTER:Set 2 Press ▲ or ▼ to select “Aspect”. Press ◀ or ▶ to select “On” or “Off”. Setup Closed Caption >> Language English Video Label >> Auto Shut Off Off Aspect On TOSHIBA Logo Light On Reset >> : Select : Adjust 3 After your desired setting, press EXIT/CANCEL to return to the normal screen. Aspect ratio of signal Automatic aspect size source (When Aspect is On) 4:3 Normal Natural 16:9 Full Full 4:3 Letter box Theater Wide2 Not defined User-set mode 43 52G0101A P37-46.indd 43 1/5/09 3:04:52 PM

TV operation Turning off the built-in speakers (26LV610U only)/ Checking the Digital- signal strength Use this feature to turn the TV speakers off when you connect an audio ENTER system. (See “Connecting to an analog audio system” 20 .) / / / This TV will allow you to view the digital signal meter for digital channels. EXIT/CANCEL MENU Turning off the built-in speakers Checking the Digital-signal (26LV610U only) strength 1 Press MENU in the TV mode. Then press ▲ or ▼ to select “Audio” , then press ▶ or ENTER. 1 Press MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select “Channel” menu, then press ▶ or ENTER. Main Menu Main Menu Picture Audio Picture Channel Audio Lock Channel Setup Lock Setup : Select ENTER:Set : Select ENTER:Set 2 Press ▲ or ▼ to select “Speakers”. Then Press ◀ or ▶ to select “On” or “Off”. 2 Press ▲ or ▼ to select “DTV Signal”, then press ▶ or ENTER. The Digital-Signal strength screen will appear. Audio If necessary, adjust the direction of the antenna to obtain the maximum signal strength. HDMI 1 Audio HDMI Speakers On DTV Signal : Select : Adjust 3 0 50 100 Press EXIT/CANCEL to return to the normal Signal Level screen. Note: 3 Press EXIT/CANCEL to return to the normal screen. • This function can be used for 26LV610U only. • If “Off” is selected, “Speaker Off” will be displayed on the screen when the volume is changed. Note: To turn on the built-in speakers: • Signal meter feature is not available for analog channels. Select “On” in step 2 above. After about 4 minutes, Signal Meter screen will return to normal TV-operation automatically. 44 52G0101A P37-46.indd 44 1/5/09 3:04:53 PM

Setting the Logo Light/ Setting the Auto Shut Off When you set the “TOSHIBA Logo Light” setting to “On”, the logo “TOSHIBA” on the front of the unit lights up. It is nice to change the mood of your room. ENTER If the Auto Shut Off feature is On, a station being viewed stops broadcasting / / / and the TV is not operated, the TV will automatically shut itself off after 15 EXIT/CANCEL minutes. MENU Setting the Logo Light Setting the Auto Shut Off 1 Press MENU in the TV mode. Press ▲ or ▼ to select “Setup”, then press ▶ or ENTER. 1 Press MENU in the TV mode. The TV menu screen will appear. Press ▲ or ▼ to select “Setup” , then press ▶ or ENTER. Main Menu Main Menu TV operation Picture Audio Picture Channel Audio Lock Channel Setup Lock Setup : Select ENTER:Set : Select ENTER:Set 2 Press ▲ or ▼ to select “TOSHIBA Logo Light”, then press ◀ or ▶ to select “On” or “Off”. 2 Press ▲ or ▼ to select “Auto Shut Off”. Press ◀ or ▶ to select “On” or “Off”. Setup Setup Closed Caption >> Language English Closed Caption >> Video Label >> Language English Auto Shut Off Off Video Label >> Aspect On Auto Shut Off Off TOSHIBA Logo Light On Aspect On Reset >> TOSHIBA Logo Light On Reset >> : Select : Adjust 3 : Select : Adjust 3 Press EXIT/CANCEL to return to the normal screen. After your desired setting, press EXIT/CANCEL to return to the normal screen. Note: • This function cannot be used for 19LV611U and 22LV611U. 45 52G0101A P37-46.indd 45 1/5/09 3:04:54 PM

TV operation Resetting your settings The Reset function returns your settings to the factory settings. ENTER / / MENU Resetting your settings 1 Note: Press MENU in the TV mode. The TV menu • The Reset function returns your adjustments to the screen will appear. Press ▲ or ▼ to select following factory settings: “Setup” , then press ▶ or ENTER. [Picture menu] Picture Setting Main Menu Brightness ..................... center (25) Picture Contrast ............................max (50) Audio Sharpness..................... center (25) Channel Color ............................. center (25) Lock Tint .................................. center (0) Setup Color Temperature .................. Cool Backlight ...........................max (16) : Select ENTER:Set Backlight (26LV610U only) ..... (15) Picture Preference ................... Sports 2 Film Mode ...................................... On Press ▲ or ▼ to select “Reset”. PC Setting Hor Position .................. center (25) Ver Position................... center (25) Setup Clock ............................... center (0) Closed Caption >> Phase............................ center (25) Language English DNR ............................................... On Video Label >> [Audio menu] Auto Shut Off Off Bass.................................. center (15) Aspect On Treble ............................... center (15) TOSHIBA Logo Light On Balance............................... center (0) Reset >> Surround ........................................ Off : Select ENTER:Set 3 Press ▶ or ENTER to return your settings to the factory settings. 4 “Reset” will appear on the screen approx. 3 seconds, then it returns to the normal 46 52G0101A P37-46.indd 46 1/5/09 3:04:55 PM

Basic playback TV/DVD Playing a disc POWER This section shows you the basics on how to play a disc. VOLUME +/– PLAY VOL +/– CAUTION STOP ENTER Keep your fingers well clear of the disc slot when disc is loading or unloading. Neglecting to do so may cause serious / / / personal injury. POWER PLAY STOP DVD VCD CD Basic playback Preparations: • When connecting to other equipment, turn the power off. 1 Press POWER on the unit or on the remote con- trol to turn on the unit. • POWER indicator on the front of the unit changes 4 On the TV screen, “ ” changes to “Reading” and then playback commences. Reading green. It may take approx. 10 seconds for a picture to appear on screen. • Every time you press POWER, the TV/DVD starts from TV mode. Basic playback • When using an amplifier, switch on the amplifier. A menu screen will appear on the TV screen if the disc has a menu feature. Press / or / on the remote control to 2 Press TV/DVD on the remote control to select DVD select title, then press ENTER. Title is selected and mode. play commences. The DVD startup screen will appear on the TV screen. 5 Press VOLUME + or – to adjust the volume. Volume : 25 3 Load a disc in the disc slot. 6 Press STOP to end playback. ■ Resuming facility • The unit records the stopped point, depending on the disc. “ ” appears on the screen. Press PLAY to resume playback (from the scene point). • If you press STOP again • Load the disc in the disc slot with the label side fac- (“■” appears on the TV screen.), ing forward. (If the disc has a label.) Hold the disc the unit will clear the stopped without touching either of its surfaces, align it with point. the guides, and place it in position. • If a disc is inserted during some modes other than ■ To start playback in the stop mode DVD mode, it may switch to DVD mode and then Press PLAY. playback may be begun automatically. Note: If the unit does not operate properly: Static electricity, etc., may affect the TV/DVDʼs operation. In such case, disconnect the AC cord, then connect it again. 47 52G0101A P47-49.indd 47 1/5/09 3:05:36 PM

Basic playback Playing a disc (Continued) EJECT POWER To obtain a higher quality picture Occasionally, some picture noise may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. In such case, you may reduce the Sharpness with the Picture Setting menu (see page 37 ). About DVD VCD CD The DVD VCD CD icons on the heading bar show the playable discs for the PLAY function described under that heading. STOP : You can use this function with DVD video discs. PAUSE VCD : You can use this function with Video CDs. CD : You can use this function with Audio CDs and CD-R/RW CDs. DVD VCD CD Basic playback (continued) To pause playback (still mode) To remove the disc Press PAUSE during playback. Press EJECT. To resume normal playback, Remove the disc after the disc comes press PLAY. out. • The sound is muted during still mode. To stop playback Press STOP. Note: • If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen according to the type of loaded disc. In this case, check your disc again 8 67 . • Some discs may take a minute or so to start playback. • When you set a single-faced disc label downwards (ie. the wrong way up), “Reading” will appear on the display for a few minutes and then “Incorrect Disc” will continue to be displayed. • Some discs may not work the resuming facility. • Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 56 . • Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs. • Do not move the unit during playback. Doing so may damage the disc. • Use the EJECT to unload and eject the disc. • Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunctions. • In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press POWER on the remote control once the movie is completed. • There may be a slight delay between the button is pressed and the function activates. 48 52G0101A P47-49.indd 48 1/5/09 3:05:41 PM

PAUSE PLAY SKIP / REV / FF SLOW / DVD VCD CD Playing in fast reverse or fast forward directions To resume normal playback Press REV or FF during playback. Press PLAY. REV: Fast reverse playback FF: Fast forward playback Note: Each time you press REV or FF • The TV/DVD mutes sound during reverse and forward scan button, the playback speed changes. of DVD/VCD discs. • The playback speed may differ depending on the disc. • You can use fast reverse/fast forward playback for mp3/ Basic playback WMA/DivX® CD. DVD VCD CD Playing frame by frame Press PAUSE during still playback. To resume normal playback Press PLAY. Each time you press PAUSE, the picture advances one frame. Note: • The sound is muted during frame by frame playback. • You can use frame by frame playback for DivX® CD. DVD VCD CD Playing in slow-motion Press SLOW (REVERSE) or (FORWARD) To resume normal playback during playback. Press PLAY. Each time you press the button, the slow-motion speed changes. Note: • The sound is muted during slow-motion playback. • You can use slow motion playback for DivX® CD. • Reverse slow does not work on VCD and DivX® CD. DVD VCD CD Locating a chapter or track Press SKIP or repeatedly to display the chapter or track number you want. Playback starts from the selected chapter or track. Playback starts from the beginning of To locate succeeding chapters or tracks. the current chapter or track. When you press twice in quick successions, playback starts from the beginning of the preceding chapter or track. Note: • A “Prohibition” symbol “✕” may appear at the upper right of the screen. This symbol means either the feature you tried is not available on the disc, or the TV/DVD cannot access the feature at this time. This does not indicate a problem with the TV/DVD. 49 52G0101A P47-49.indd 49 1/5/09 3:05:42 PM

Advanced playback Zooming/Locating desired scene This unit will allow you to zoom in on the frame image. You can then make 0–9 selections by switching the position of the frame. JUMP Use the title, chapter and time recorded on the DVD disc to locate the DISPLAY desired point to playback. In the case of VCD/Audio CD discs, time and ZOOM track are used to locate the desired point to playback. To check the title/track, chapter/track and time, press DISPLAY. / / / ENTER EXIT/CANCEL DVD DVD VCD CD Zooming VCD CD Locating desired scene 1 Press ZOOM during playback. The center part of the image will be 1 Press JUMP during playback or resume stop mode. Jump zoomed in. Title Each press of ZOOM will change Chapter the ZOOM 1 (x 1.3), 2 (x 1.5) Time and 3 (x 2.0). 1 2 Press or ter” or “Time”. to select the “Title/Track”, “Chap- Jump Title Chapter Time 2 Press frame. / / / to view a different part of the You may move the frame from the center position to UP, DOWN, 3 Press Number buttons (0–9) to input the number. Jump LEFT or RIGHT direction. Title Chapter 12 Time 3 In the zoom mode, press ZOOM repeatedly to return to a 1:1 view ( Off). • If you input a wrong number, press EXIT/CANCEL. • Refer to the package supplied with the disc to check the numbers. Note: • You can select the Pause, Slow or Search playback in the 4 Press ENTER. Playback starts. • When you change the title, playback starts from Chapter 1 of zoom mode. the selected title. • Some discs may not respond to zoom feature. • Some discs may not work in the • Zoom function can be used for DivX® CD. above operation. Note: • In case of the Audio CD and Video-CD, only Track and Time can be selected. • In case of the Video-CD playback with PBC, the JUMP does not work. To turn off PBC, see page 56 . • Only Time search function can be used for DivX® CD. 50 52G0101A P50-57.indd 50 1/5/09 3:06:18 PM

Marking desired scenes The unit stores the points that you want to watch again up to 3 points. You can resume playback from each scene. ENTER / EXIT/CANCEL MARKER DVD VCD Marking the scenes DVD VCD Returning to the scenes 1 Press MARKER during playback. 1 Press MARKER during playback or stop mode. 2 Select the blank Marker using or . Then press ENTER to mark the desired scene. 2 Press or to select the Marker 1-3. • Repeat this procedure to mark the other 2 scenes. Advanced playback 3 Press MARKER to clear the display. 3 Press ENTER. Playback starts from the marked scene. Note: ■ To cancel the Marker • Some discs may not work with the marking operation. Follow the above steps 1~2, then press EXIT/CANCEL. • The marking is cancelled when you eject the disc or turn the power off. • Some subtitles recorded around the marker may fail to appear. • In case of Video CD with PBC, Marker function is prohibited. 51 52G0101A P50-57.indd 51 1/5/09 3:06:20 PM

Advanced playback Repeat playback/A-B Repeat playback PLAY MODE ENTER PLAY SKIP / REPEAT A-B DVD DVD VCD Repeat playback VCD CD A-B Repeat playback A-B repeat playback allows you to repeat a section between 1 Press PLAY MODE during playback or stop mode. two selected points. 1 Press REPEAT A-B during playback. The start point is selected. A 2 [DVD] Press ENTER repeatedly to select “Chapter” or “Title”. The unit automatically starts repeat playback after finishing the current title or chapter. 2 Press REPEAT A-B again. Play Mode Repeat : Off The end point is selected. Playback starts at the point that you selected. [Video CD] Playback stops at the end point and Press to select “Repeat”. returns to Point A automatically, then Press ENTER repeatedly to select “Track” or starts again. “All”. A B The unit automatically starts repeat playback after finishing the current track. Play Mode Mode : Off Repeat : Off To resume normal playback • If you set the repeat mode during stop mode, Press REPEAT A-B again. press PLAY to start Repeat playback. “ Off ” appears on the screen. 3 Press PLAY MODE again to clear the screen. Note: • In A-B Repeat mode, subtitles near the A or B locations may not be displayed. • You cannot set the A-B Repeat for the scenes that include To resume normal playback multiple angles. Select Repeat : “Off” in step 2. • A-B Repeat playback does not work when Repeat playback is activated. Note: • You may not be able to set A-B Repeat during certain • Some discs may not work with the repeat operation. scenes of the DVD. • In case of Video CD with PBC, Repeat function is • A-B Repeat does not work with an interactive DVD and prohibited during playback. MP3/WMA/JPEG CD. • Chapter/Track repeat function is canceled whenever SKIP or is pressed. • In case of Video CD with PBC, A-B Repeat is prohibited. 52 52G0101A P50-57.indd 52 1/5/09 3:06:21 PM

Program playback/Random playback You can arrange the playback order of tracks on the disc. And the 0–9 unit can also select tracks at random and playback them. These features work for Video CD. PLAY MODE For Audio CD and MP3/WMA CD, please see “Random playback ENTER (Audio CD/MP3/WMA/JPEG/DivX®)” 61 and “Program playback (Audio CD/MP3/WMA/JPEG/DivX®)” 62 . / / / EXIT/CANCEL PLAY VCD VCD Program playback 1 Press PLAY MODE in the stop mode. Mode Play Mode : Off 1 ––– 4 Press / to return to the left column, then press / to select the “Program Playback” and press ENTER. Repeat : Off 2 ––– Program Playback 3 ––– The programs you selected will start to playback in order. • To resume normal playback, 2 Press or to select “Mode”, then press ENTER repeatedly to select “Program”. select Mode: “Off” in step 2. Play Mode Play Mode Mode : Program 1 9 Mode : Program 1 ––– Repeat : Off 2 3 Repeat : Off 2 ––– Program Playback 3 11 Program Playback 3 ––– Advanced playback 3 Press / to select the programming position. Press / and then use Number buttons (0–9) to input the track. ■ To change the program 1. Select Mode to “Program” (as step 2), press / / / to select the track number you want to change, then press EXIT/CANCEL. 2. Press Number buttons (0–9) to input the new track • To program others, repeat this step. number. • If you input a wrong number, press ■ To clear the program one by one EXIT/CANCEL. Select Mode to “Program”, press / / / to select the track number. Then press EXIT/CANCEL. ■ To clear all the programs Play Mode At the left column, press / to select “Clear Program”. Mode : Program 1 9 Then press ENTER. Repeat : Off 2 ––– Note: 3 ––– Program Playback • In playing back the Video CD with PBC, you cannot set Program playback. • The program is cancelled when you eject the disc or turn the power off. CD VCD Random playback 1 Press PLAY MODE during playback or stop mode. 3 Press PLAY. The Random Playback will start. • If you set “Random” during playback mode, 2 Press / to select “Mode”, then press ENTER repeatedly to select “Random”. Random playback will begin after the track that is currently being played has ended. • To resume normal playback, Play Mode select Mode: “Off” in step 2. Mode : Random 1 ––– Repeat : Off 2 ––– Note: Program Playback 3 ––– • In case of Video CD with PBC, you cannot set Random function during playback. • The random playback is cancelled when you eject the disc or turn the power off. 53 52G0101A P50-57.indd 53 1/5/09 3:06:21 PM

Advanced playback Changing angles/Title selection/DVD menu DVD MENU / / / ENTER PLAY ANGLE TOP MENU Changing angles When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from. 1 Press ANGLE during playback. The current angle will appear. 2 Press ANGLE repeatedly until the desired angle is selected. 1/2 Note: • Depending on the DVD, you may not be able to change the angle even if multi-angles are recorded on the DVD. Title selection Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title. 1 Press TOP MENU during playback. Title menu appears on the screen. 3 Press ENTER or PLAY. The playback of the selected title will start. 2 Press / / / to select the desired title. Note: • Depending on the DVD, you may not be able to select the title. • Depending on the DVD, a “title menu” may simply be called a “menu” or “title” in the instructions supplied with the disc. DVD menu Some DVDs allow you to select the disc contents using the menu. When you playback these DVDs, you can select the subtitle language, soundtrack language, etc, using the menu. 1 Press DVD MENU during playback. The DVD menu appears on the TV screen. 3 Press ENTER. The menu continues to another screen. Repeat steps 2 and 3 to set • Press DVD MENU again to resume the item completely. playback at the scene when you pressed DVD MENU. Note: 2 Press / / / to select the desired item. • Depending on the DVD, you may not be able to resume playback from the scene point when you press DVD MENU. 54 52G0101A P50-57.indd 54 1/5/09 3:06:22 PM

Changing soundtrack language/Subtitles AUDIO SELECT SUBTITLE DVD VCD Changing soundtrack language Subtitles You can select the language when you play a multilingual disc. When playing back a disc recorded with subtitles, you can select the subtitle language or turn the subtitle off. 1 Press AUDIO SELECT during playback. The current soundtrack language will appear. 1 Press SUBTITLE repeatedly during playback until the desired language is selected. 1/5 Eng 1/2 Eng Dolby Digital 2 Press AUDIO SELECT repeatedly until the desired language is selected. 2 To turn off the subtitle, press SUBTITLE until “Off” appears. Off Advanced playback 2/2 Fre Dolby Digital • The on screen display will disappear after a • The on screen display will disappear after a few few seconds. seconds. Note: • Depending on the DVD, you may not be able to change In case of Video CD playback subtitles, or to turn subtitles on or off. • While playing a DVD, the subtitle may change when Audio type changes as follows each time you press AUDIO you loaded or eject the disc. SELECT. • In some cases, a selected subtitle language may not LR L R be changed immediately. Note: • If the desired language is not heard after pressing the button several times, the language is not recorded on the disc. • The selected soundtrack language is cancelled when you eject the disc. The initial default language or available language will be heard if the disc is played back again. • If you select DTS in playing DTS-encoded disc, no sound will be heard from the TV/DVDʼs speakers. 55 52G0101A P50-57.indd 55 1/5/09 3:06:23 PM

Advanced playback Disc status/To turn off the PBC DISPLAY PLAY MODE / ENTER DVD VCD Disc status VCD To turn off the PBC (see page 8) 1 With press of DISPLAY, the status of the disc Press PLAY MODE in the stop mode. will appear on the screen. To cancel the display, press DISPLAY again. 2 Press / to select “Mode”, then press ENTER repeatedly until “Off” appear. DVD Play Mode ELAPSED TOTAL DISC OPERATION TIME TIME Mode : Off 1 ––– Repeat : Off 2 ––– Program Playback 3 ––– TITLE NO. DVD 00:15:25 01:41:39 Title 1/3 Chapter 2/24 CHAPTER 1/1 Eng Dolby Digital 1/2 Eng NO. 1/1 3 Press PLAY MODE again to clear the screen. ANGLE NO. SUBTITLE LANGUAGE AUDIO LANGUAGE A KIND OF AUDIO ■ To turn on the PBC Follow the above steps 1~2, then press ENTER repeatedly until “PBC” appear. Video CD ELAPSED TOTAL DISC OPERATION TIME TIME VCD 00:08:32 00:51:03 Track 3/15 TRACK NO. 56 52G0101A P50-57.indd 56 1/5/09 3:06:24 PM

MP3/WMA/JPEG/DivX® and Audio CD operation This unit can playback the MP3/WMA/JPEG/DivX®-data which has been recorded on CD-R or CD-RW. To produce the MP3/WMA/JPEG/DivX®-data, you need a Windows-PC with CD-RW drive and a MP3/WMA/JPEG/DivX®-encoding Software (not supplied). The Apple-HFS-System cannot be played. This player requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality. There are many different types of recordable disc formats (including CD-R containing MP3/WMA files). Not all recordable discs will produce optimal playback quality. The technical criteria set forth in this ownerʼs manual are meant only as a guide. Use of CD-RW for MP3 files is not recommended. You must obtain any required permission from copyright owners to download or use copyrighted content. Toshiba cannot and does not grant such permission. CD Audio CD/MP3/WMA/JPEG/DivX® CD information Limitations on MP3/WMA/JPEG/DivX® CD playback • MP3/WMA/JPEG/DivX® CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension letters, “.mp3”, “.wma”, “.jpg”, “.div”, “.divx”, “.avi”. • MP3/WMA/JPEG/DivX® CD must be correspond to the ISO standardized files. • This unit can read 2000 files per disc. If one disc has more than 2000 files, it reads up to 2000 files, the remaining files will be omitted. • MP3/WMA/JPEG/DivX® CDs cannot be used for the purpose of recording. • It may take more than one minute for this unit to read MP3/WMA/JPEG/DivX® files depending on its structure. • Music recorded by “Joliet Recording Specification” can be played back, the file name is displayed (within 15 letters) on the screen. Long file names will be condensed. • The music files recorded by “Hierarchical File System” (HFS) cannot be played. Advanced playback Limitations on display • The maximum number for display is 15 letters. Available letters for display are the following: capital or small alphabets of A through Z, numbers of 0 through 9, and _ (under score). • Other letters than those above are replaced in hyphen. Notes on MP3/WMA/JPEG/DivX® files To playback MP3/WMA/JPEG/DivX® CD in the recorded order, 1. Use MP3/WMA/JPEG/DivX® software that records data alphabetically or numerically. 2. Name each file including two-digit or three-digit number (ex. “01” “02” or “001” “002”). 3. Refrain from making too many sub-folders. CAUTION: • Some MP3/WMA/JPEG/DivX® CDs cannot be played back depending on the recording conditions. • The CD-R/RW that has no music data or non MP3/WMA/JPEG/DivX® files cannot be played back. Standard, sampling frequency and the bit rate: MP3 CD MPEG-1 Audio 32kHz, 44.1kHz, 48kHz 32kbps ~ 320kbps (constant bit rate or variable bit rate) The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of constant bit rate. WMA CD WMA version 7 and 8 32kHz/48kbps, 44.1kHz/48kbps~192kbps, 48kHz/128kbps~192kbps The file recorded by mono, 48kHz, 48 kbps is not available to this unit. DivX® video DivX® version: DivX® 3, 4, 5, and 6 (specifically 3.1.1, 4.1.2, 5.0.2, 5.0.5, 5.1.1, 5.2.1, 6.0 at Home Theater profile). Audio format: MPEG1 Layer2 (MP2), MPEG1 Layer3 (MP3) Sampling frequencies: 32kHz, 44.1kHz, 48kHz Bit rate: 32kbps ~ 320kbps Resolution: Max 720 x 576 (at 25fps), Max 720 x 480 (at 30fps) Microsoft, Windows Media, and Windows Logo are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license. 57 52G0101A P50-57.indd 57 1/5/09 3:06:25 PM

Advanced Advanced playback playback MP3/WMA/JPEG/DivX® and Audio CD operation (continued) / / / ENTER STOP PLAY RETURN CD MP3/WMA and Audio CD playback 1 Load an Audio CD or a disc on which MP3 or WMA files have been recorded in the disc slot. About file menu 2 A file browser screen will appear on the screen. Folder-1 Select Files 3/15 00:00:00 /WMA-11.WMA MP3-5 Select Files Folder-2 Repeat :Off MP3-6 Repeat :Off MP3-1 Mode :Off MP3-2 WMA-11 Mode :Off MP3-3 WMA-12 WMA-1 WMA-2 JPEG Preview Picture-1 WMA-3 Picture-2 Music Playing Movie-1 3 Press / to select file. Movie-2 /MP3-2.MP3 Folder-1 Select Files Folder-2 Repeat :Off MP3-1 Mode :Off MP3-2 MP3-3 WMA-1 JPEG Preview WMA-2 WMA-3 • In case the current directory includes more than 8 Note: files, press or to scroll in the file list. • In the case of a CD containing a mixture of MP3, WMA, JPEG and DivX® files, the files are played back by • To see contents in folder, select the folder and then selecting them from the file browser. press ENTER. To return to the parent directory, press RETURN or select “ Go Up ...” then press ENTER. Note: • When PLAY is pressed after the file browser • During MP3/WMA playback, you cannot use Jump and A-B displayed, playback begins automatically starting Repeat functions. from the first file. In this case, if the first file is an • You can use Repeat (Track or All), Random functions and MP3/WMA file, only MP3/WMA files are played back Program playback for Audio CD/MP3/WMA/JPEG/DivX® in order. If the first file is a JPEG file, the first JPEG playback 61 62 . file is played back. If the first file is a DivX® file, the first DivX® file is played back. If there is no file at a ■ Select Files root directory, playback does not begin automatically. The file type to make it display in the file browser can be chosen. 4 Press ENTER. The selected file starts playing back. 1.Press or to highlight “Select Files” at right column in the file browser. 2. Press ENTER, then press or to select file type from the list (Music, Picture or Movie). 3. Press ENTER to add/remove check mark. Checked file type will be displayed in the file browser. 5 Press STOP to end playback. 4. Press RETURN to save the setting. • The unit records the stopped point. “ ” appears on the TV screen. Press PLAY to resume playback (from the scene point). • If you press STOP again or unload the disc, the unit will clear the stopped point. 58 52G0101A P58-62.indd 58 1/5/09 3:07:15 PM

ZOOM DVD MENU ENTER / / / PAUSE STOP PLAY SKIP ANGLE TOP MENU CD JPEG playback CD Slide show playback The slide show enables you to view pictures (files) one after 1 Load a JPEG disc in the disc slot. another automatically. Preparation: • Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds” 2 A file browser screen will appear on the screen. /Picture-01.JPG Picture-01 Picture-02 Select Files Repeat :Off or “15 Seconds” 66 . 1 Picture-03 Mode :Off Picture-04 Picture-05 Select your desired starting file for the slide Picture-06 Picture-07 JPEG Preview show in the step 3 on left. Picture-08 W: 2048 H: 1536 3 Press / to select the file. To display a thumbnail list, press DVD MENU. 2 Press ENTER or PLAY to start slide show from the selected file. Press / / / to select the desired file. (To return to the file browser, press TOP MENU.) Advanced playback • If you press PAUSE during the slide show, the slide show stops temporary. “❙❙” appears briefly on the TV screen. Press PLAY or SKIP again to resume the slide show. • If the picture appears upside down or sideways, press • When PLAY is pressed after the file browser ANGLE repeatedly until itʼs right side up. displayed, playback begins automatically starting from the first file. In this case, if the “ ”, “ ”, “ ” or “ ” appears on the TV screen. first file is a JPEG file, the first JPEG file is • When the slide show playback finished, the file list played back. If the first file is a DivX® file, the appears. first DivX® file is played back. If the first file • To stop the slide show, press STOP. The file browser is an MP3/WMA file, only MP3/WMA files appears. are played back in order. If there is no file at a root directory, playback does not begin Note: automatically. • During JPEG playback, you cannot use Jump and A-B Repeat functions. 4 Press ENTER or PLAY. The selected picture appears on the screen. • When an image exceeds 5760 x 3840 pixels, the entire image may not be displayed on a screen, preview window or thumbnail list. • It may have a longer interval due to the size of data. Rotating an image You can rotate an image by 90 degrees. Press ANGLE during playback of the image. “ ”, “ ”, “ ” or “ ” appears on the screen. Zooming an image Zoom function also can be used in viewing JPEG files. Press ZOOM (See “Zooming” 50 ). 5 Press STOP to end playback. The file browser appears on the screen. If you want to watch the other file, repeat steps 3 ~ 4. 59 52G0101A P58-62.indd 59 1/5/09 3:07:16 PM

Advanced playback MP3/WMA/JPEG/DivX® and Audio CD operation (continued) ENTER / STOP PLAY CD DivX® playback CD Playing DivX® VOD content DivX® VOD content is protected by DRM (Digital Rights 1 Load a disc on which DivX® files have been recorded in the disc slot. Management) system. This restricts playback of content to specific registered devices. 2 A file browser screen will appear on the TV screen. If the incorrect DRM file /Movie-01.DIVX is loaded, “Authorization Movie-01 Select Files Error This player is not View DivX(R) VOD Rental Movie-02 Repeat :Off This rental has 5 views left. Movie-03 Mode :Off authorized to play this Do you want to use one Movie-04 Movie-05 video” will appear on the of your 5 views now? Movie-06 JPEG Preview screen. Movie-07 Yes No Movie-08 When you attempt to play ® DivX VOD, the number of plays is limited and the 3 Press / to select file. right message will appear on the screen. If you wish to play it, select “Yes”. • If the number of plays goes over the limit, then “Rental Expired” will be displayed. In this case, the file will not be played. Note: • When PLAY has been pressed after the • In order to play DivX® VOD content on this unit, you first file browser displayed, playback begins need to register the unit with registration code. See page automatically starting from the first file. In this 67 . case, if the first file is a JPEG file, the first JPEG • Depending on the recording conditions of DivX® file, you file is played back. If the first file is a DivX® may not be able to use FF, REV or JUMP function. file, the first DivX® file is played back. If the first file is an MP3/WMA file, only MP3/WMA file are played back in order. If there is no file at a root directory, playback does not begin automatically. 4 Press ENTER or PLAY. The selected DivX® movie will be played back on the TV screen. 5 Press STOP to end playback. • The unit records the stopped point. “ ” apears on the TV screen. Press PLAY to resume playback (from the scene point). • If you press STOP again or unload the disc, the unit will clear the stopped point. To watch the other file, repeat steps 3 ~ 4. 60 52G0101A P58-62.indd 60 1/5/09 3:07:18 PM

Repeat, random and program playback using file browser / / / ENTER PLAY SKIP / CD Repeat playback (Audio CD/ CD Random playback (Audio CD/ MP3/WMA/JPEG/DivX®) MP3/WMA/JPEG/DivX®) 1 In the file browser, press / / “Repeat” during stop mode. / to select 1 In the file browser, press / “Mode” during stop mode. / / to select Folder-1 Select Files Select Files Folder-1 Folder-2 Repeat :Off Folder-2 Repeat :Off MP3-1 Mode :Off MP3-1 Mode :Off MP3-2 MP3-2 MP3-3 MP3-3 2 Press ENTER repeatedly to select “Track” or “All”. 2 Press ENTER to select “Random”. Advanced playback Folder-1 Select Files Folder-1 Select Files Folder-2 Repeat :Track Folder-2 Repeat :Off MP3-1 Mode :Off MP3-1 Mode :Random MP3-2 MP3-2 MP3 3 MP3-3 3 Press PLAY. The unit automatically starts repeat 3 Press PLAY. The random playback will start. playback after finishing the current track. To resume normal playback To resume normal playback Select Repeat : “Off” in step 2. Select Mode : “Off” in step 2. Note: Note: • The repeat function is cancelled when you eject the disc • The random function is cancelled when you eject the disc or turn the power off. or turn the power off. • Track repeat function is canceled whenever SKIP or is pressed. • The function of A-B Repeat can be used for DivX® CD. See “A-B Repeat playback” 52 . 61 52G0101A P58-62.indd 61 1/5/09 3:07:18 PM

Advanced playback Repeat, random and program playback using file browser (continued) / / / ENTER PLAY CD Program playback (Audio CD/MP3/WMA/JPEG/DivX®) 1 4 In the file browser, press / / / to select Press / to select “Program View”, then press “Edit Mode”, then press ENTER. ENTER. Program View shows only the programmed files that you have added in step 2. MP3-1 Edit Mode Folder-1 Repeat :Off MP3-2 Browser View Folder-2 Mode :Off MP3-3 Clear Program MP3-1 Edit Mode WMA-3 MP3-2 MP3 3 JPEG Preview When “Edit Mode” is black color, you can mark the files Program View which you want to add into Program list. 2 Press / / / to select file you want to add into the program list. Folder-1 Folder-1 Folder-2 MP3-1 MP3-2 Edit Mode Program View Add To Program Repeat :Off Folder-2 Mode :Off MP3-3 MP3-1 Edit Mode WMA-1 JPEG Preview MP3-2 WMA-2 WMA-3 MP3-3 Browser View WMA-1 JPEG Previe WMA-2 5 In the Program View, press PLAY. The files Press ENTER. Selected file start to playback in programed order that were was marked. added by you. Repeat this procedure to select the other files. To remove file from program list in stop mode In the Edit Mode, switch to Program View. Select file 3 Press / / / to select “Add To Program”. Then press ENTER. All marked files are added into the program list. you want to remove, then press ENTER. Select “Clear Program” and press ENTER. Marked file is removed from program list. Folder-1 Edit Mode Folder-2 Program View Note: MP3-1 Add To Program • The program function is cancelled when you eject the disc MP3-2 or turn the power off. MP3-3 WMA-1 JPEG Preview WMA-2 When you finish storing the files which you want into the Program list, select “Edit Mode” and press ENTER to release edit mode. 62 52G0101A P58-62.indd 62 1/5/09 3:07:19 PM

Function setup TV/DVD Customizing the function settings You can change the default settings of the DVD mode to customize performance to your preference. Press TV/DVD on the remote control to select DVD mode. / / / ENTER SETUP RETURN DVD VCD CD Setting procedure 1 Press SETUP during stop mode. The following on-screen display appears. 4 Then press or ENTER. The selectable settings will appear. Parental DRC Menu TV Screen : 4:3 Off English 4:3 QSoundSet Password Subtitle Display : On English 16:9 Parental DRC E.B.L. Menu : English Off Output Mode : Auto Audio Picture Interlace English QSound TV Subtitle Screen Set Password : On 4:3 English JPEG Interval DivX(R) :VOD Off Output Display Audio : English Interlace On Picture Mode DivX(R) :VOD Auto JPEG Interval : 5 Seconds Screen Saver : On 2 Press or to select the desired section, then Change the selection using or , by referring press or . 5 to the corresponding pages 64 ~ 67 . Press ENTER to save the setting. Parental DRC Menu TV Screen : English Off 16:9 QSoundSet Password Subtitle Display : On English • Repeat steps 3, 4 and 5 to Output Mode Audio Picture : Auto Interlace English change other option. JPEG Interval DivX(R) :VOD Off • To select another section, go Function setup back to step 2 by pressing repeatedly. 3 First option will be highlighted. Press to select the desired option. Parental DRC Menu TV Screen : English Off 16:9 or 6 To clear SETUP screen, press SETUP once or press RETURN repeatedly. QSoundSet Password Subtitle Display : On English Output Mode Audio Picture : Auto Interlace English JPEG Interval DivX(R) :VOD Off 63 52G0101A P63-68.indd 63 1/5/09 4:07:10 PM

Function setup Customizing the function settings (Continued) Setting details Section Option Details Page Menu To select the language of “Menu”, “Subtitle” and “Audio” Subtitle 65 if more than one language are available on the disc. Audio To select a picture size according to the aspect ratio of TV Screen your TV. 65 To turn On or Off the operational status display on the TV Display screen. To select a preferred picture mode from “Video”, “Film” or Picture Mode “Auto”. 66 JPEG Interval To select a preferred setting for the slide show playback. Night Mode To select “On” or “Off” for Night Mode. 66 To select a digital output sound format corresponding to Digital Out your system connection. Parental To select a preferred parental level for the parental setting. Password To change the password. 67 DivX(R) VOD To display your 8-character registration code. 64 52G0101A P63-68.indd 64 1/5/09 3:08:06 PM

Parental DRC E.B.L. Menu : Off English Parental DRC Menu TV Screen : Off English 16:9 QSound TV Subtitle Screen Set Password : 4:3 On English QSoundSet Password Subtitle Display : English On Output Display Audio : English Interlace On Output Mode Audio Picture : Auto Interlace English Picture Mode DivX(R) :VOD Auto JPEG Interval DivX(R) :VOD Off JPEG Interval : 5 Seconds Screen Saver : On Menu, Subtitle, Audio TV Screen You can select the language of “Menu”, “Subtitle” and You have the following screen sizes to choose from: “Audio” if more than one languages are recorded onto the disc. 4:3 (Letter box): When playing back a wide screen-DVD disc, it English, Francais, Espanol: displays the wide picture with black bands at the The selected language will be heard or seen. top and bottom of screen. Function setup Other: Other language can be selected (see “Language 4:3 (Pan & scan): code list” 72 ). It displays the wide picture on the whole screen with left and right edges automatically cut off. Original (Audio): The unit will select the first priority language of 16:9 (Wide): each disc. A wide screen picture is displayed full size. Off (Subtitle): Subtitles do not appear. Note: • If the DVD disc is not formatted in the Pan & scan style, it Note: will display 4:3 style. • If the selected language is not recorded on the disc, the first-priority language is selected. • If you want to change the OSD language, you can perform it by “Language” in the TV menu 23 . Display On screen display can be switched on or off when you press any buttons. Off: On screen displays do not appear when you press any buttons. On: On screen displays appear when you press the buttons (factory setting). 65 52G0101A P63-68.indd 65 1/5/09 3:08:06 PM

Function setup Customizing the function settings (Continued) Setting details (continued) Picture Mode Parental Menu E.B.L. Night Mode : Off English Subtitle TV Digital Screen Out Set Password : English 4:3 Bitstream There are two types of source content in pictures recorded in DVD video discs: film content (pictures Output Audio Display : On Interlace English recorded from films at 24 frames per second) and Picture Mode DivX(R) VOD : Auto video content (video signals recorded at 30 frames per JPEG Interval : 5 Seconds second). Make this selection according to the type of Screen Saver : On content being viewed. Auto: Select this selection normally. The DVD player automatically detects ■ Night Mode source content, film or video of Night Mode enables you to control the dynamic range so as playback source, and converts that to achieve a suitable sound for your equipment. signal in an appropriate method. Off: It plays back at the recording level on the disc. Film: The DVD player converts film content On: Loud sound such as explosion is toned down pictures appropriately. Suitable for slightly when played back. This is suitable when playback of film content pictures. it is connected to a stereo. Note: Video: The DVD player filters video signal and • This function works only when the disc recorded with Dolby Digital is played back. converts it appropriately. • The level of Night Mode may differ depending on DVD Suitable for playback of video content video disc. pictures. Note: • Depending on the disc, pictures may be cut off or ■ Digital Out doubled. In this case, select “Video”. You can select the digital output sound format corresponding JPEG Interval to your system connection. Off: You can continuously playback all JPEG files There is no sound output from DIGITAL AUDIO OUT jack. automatically. After the selection below, the disc will start playback on PCM: JPEG files which have been recorded. Change Dolby Digital to PCM for the output. Select when connected to a 2 channel digital stereo amplifier. Off: Plays back one file at a time. Bitstream: Disc audio bitstream data will be output. 5 Seconds: Note: Plays back images in the form of a slide show at • Even if you select “Bitstream”, MPEG Audio will be output 5 second intervals. in PCM format. 10 Seconds: Plays back images in the form of a slide show at 10 second intervals. 15 Seconds: Plays back images in the form of a slide show at 15 second intervals. 66 52G0101A P63-68.indd 66 1/5/09 3:08:07 PM

■ Set the new password DRC Menu E.B.L. Parental : Off English QSound Subtitle TV Password Screen : Change On 4:3 English 1) Press or to select “Password”, then press Audio VOD Display DivX(R) : On Display English ENTER. “Enter Current Password” screen will Picture Mode : Auto appear. JPEG Interval : 5 Seconds 2) Press Number buttons (0–9) to input the current Screen Saver : On password (If the password has not been set yet after you purchase this unit, it is “0000”). 3) Then press ENTER. “Enter New Password” screen will appear. Press Number buttons (0–9) to input the new password. Parental control setting 4) Press ENTER. Now your new password has been set. Be sure to remember this number! Some discs are specified as not suitable for children. Such discs can be limited not to playback with the unit. If you forget the password 1) Press or to select “Parental”, then press ENTER. “Enter Password” screen will appear. 1) Press EJECT to remove the disc. 2) Press “0000” using Number buttons (0–9). 2) While holding 7 down on the remote control and (Please note, this is pre-setting password of this then press STOP on the unit. “Password Clear” unit). Then press ENTER. The parental level list appears on the screen. Now the password Function setup will appear. has been returned to the initial value (“0000”). • Level Off: The parental control setting does not function. • Level 8: Virtually all DVD software can be ■ DivX® VOD played back. • Level 1: DVD software for adults cannot be In order to play DivX® VOD (Video On Demand) content played back. on this unit, you first need to register the unit with your 3) Press or to select from the level 1 to level 8. DivX® VOD content provider. You do this by generating The limitation will be more severe as the level a DivX® VOD registration code, which you submit to number is lower. Then press ENTER. your provider. Note: • The parental control level is equivalent to the following Press or to select “DivX(R) VOD”. Then press USA movie ratings. ENTER. Your 8-character registration code is displayed. Make a note of the code as you will need Level 1: G Level 5: it when you register with a DivX® VOD provider. Level 2: Level 6: R Then press ENTER to select Done. Level 3: PG Level 7: NC-17 Level 4: PG-13 Level 8: Note: The parental control levels for other countries/area • If each setup (pages 65 ~ 67 ) has completed, the unit than U.S. are included for future use. Check the can always work under the same condition (especially with appropriate parental control level when you buy a DVD DVD discs). video disc equipped with the parental control feature Each setup will be retained in the memory even if you turn in the future. the power off. • Depending on the discs, the unit cannot limit playback. • Some discs may not be encoded with specific rating level information though its disc jacket says “adult.” For those discs, the age restriction will not work. • The password is required every time when you change the parental level. • If you input a wrong number, press EXIT/CANCEL. 67 52G0101A P63-68.indd 67 1/5/09 3:08:07 PM

Function setup EJECT Temporary cancel the rating level by DVD disc 0–9 Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. ENTER RETURN DVD Temporary cancel the rating level by DVD disc Note: 1 Load a DVD disc. • This temporary cancellation of rating level will be kept until the disc is ejected. • When the disc is ejected, the original rating level will be set again automatically. 2 If the DVD disc has been designed to temporarily cancel the Rating level, the screen which follows the “Reading” screen will change, depending on which disc is played. If you select “YES” with the ENTER key, password input screen will then appear. • If “NO” is selected, press EJECT to remove the disc. 3 Enter the password with Number buttons (0–9). Then press ENTER. To exit from the entry, press RETURN. Enter Password 4 Playback will commence if the entered password is correct. 68 52G0101A P63-68.indd 68 1/5/09 3:08:08 PM

Others Understanding the Power Return feature If the power is cut off while you are viewing the TV/DVD and the power is resupplied, the Power Return feature will turn the TV/DVD on automatically. If the power is going to be off for a long time or you are going to be away from the TV/DVD for a long time, unplug the power cord from the wall outlet to prevent the TV/DVD from turning on in your absence. Troubleshooting Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE POWER • Make sure the connection of AC cord is secured. TV/DVD does not operate. • Try another AC outlet. 21 • Unplug unit, then plug it back in. TV BROADCAST RECEPTION • Station or Cable TV may have problems, try another station. 27 Poor sound or No sound. • Check Volume adjustments or mute. 27, 28 • Check for sources of possible interference. 71 • Station or Cable TV may have problems, try another station. 27 • Check antenna or Cable TV connections, reorient antenna. 14, 15 Poor picture or No picture. • Check for sources of possible interference. 71 • Check Picture setting. 37 • Station or Cable TV may have problems, try another station. 27 Poor reception on some • Station signal is weak, reorient antenna to receive weaker station. 14 channels. • Check for sources of possible interference. 71 • Station or Cable TV may have problems, try another station. 27 • Make sure channels are set into memory. 24 Poor color or no color. • Check Picture setting. 37 • Check antenna or Cable TV connections, reorient antenna. 14, 15 Others • Check for sources of possible interference. 71 • Station or Cable TV may have problems, try another station. 27 • Make sure channels are set into memory. 24 Picture wobbles or drifts. • Cable TV company is scrambling signal. - • Check antenna or Cable TV connections, reorient antenna. 14, 15 • Check all Cable TV connections. 15 No CATV reception. • Set Air/Cable selection to the Cable position. 24 • Station or Cable TV system problems, try another station. 27 Horizontal or diagonal bars on • Check antenna or Cable TV connections, reorient antenna. 14, 15 screen. • Check for sources of possible interference. 71 • Make sure Air/Cable selection is in the appropriate position. 24 No reception above channel 13. • If antenna is used, check UHF antenna connections. 14 • Auto shut off feature worked. 45 TV shuts off. • Sleep Timer is set. 28 • Power interrupted. - • TV station experiencing problems or program tuned is not closed 27 captioned. Try another channel. Closed - Caption is not • Check Cable TV connection or VHF/UHF antenna, reposition or 14, 15 activated. rotate antenna. • Set “CC Setting” to “On” to turn on the closed caption decoder. 35 Display is not shown in your • Select proper language in the menu options. 23 language. 69 52G0101A P69-Back.indd 69 1/5/09 3:08:42 PM

Others Troubleshooting (Continued) SYMPTOMS POSSIBLE SOLUTIONS PAGE DVD • No disc is loaded. 47 Playback doesnʼt start. • The disc may be dirty. Clean up the disc. 7 • The unit cannot play CD-ROMs, etc. 8 No picture. • TV/DVD selector is not set correctly. 47 • Check the input selector of the amplifier is set properly. - No sound. • The unit is in the special playback mode. 49 • Select the correct Audio Input/Output position on AV amplifier. 18, 19 Picture is distorted during fast • The picture will be distorted occasionally. - reverse/forward playback. Stopping playback, search, slowmotion play, repeat play, or • Some discs may not do some of the functions. - program play, etc. cannot be performed. No on-screen display. • Set Display to On. 65 The unit or remote operation key • Turn off the unit and unplug the AC power cord for several minutes, - is not functioning. then replug it. Playback does not start when • Check the Parental setup. 67 the title is selected. Audio soundtrack and/or subtitle language is not changed when • Multilingual language is not recorded on the DVD disc. 55 you playback a DVD. • Some discs have no subtitles. No subtitle. 55 • Subtitles are cleared. Press SUBTITLE. Angle cannot be changed. • Multi-angles are not recorded on the DVD disc. 54 “✕” appears on the screen. • The function is prohibited with the unit or the disc. 49 REMOTE CONTROL • Aim the remote control at the remote sensor. • Operate within approx. 5 meters or reduce the light in the room. The remote control does not • Clear the path of the beam. 13 function. • The batteries are weak. Replace the batteries. • Check the batteries are inserted correctly. 70 52G0101A P69-Back.indd 70 1/5/09 3:08:42 PM

Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps or AC powered tools and appliances such as drills or hair dryers. GHOSTS Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected by tall buildings, hills or other large objects. Changing the direction or position of the antenna may improve the reception. SNOW If the TV/DVD is located far from the TV station, in a fringe reception area where the signal is weak, small dots may appear in the picture. If the signal is extremely weak, the installation of a larger external Others antenna may be necessary. RADIO FREQUENCY INTERFERENCE (RFI) Caused by two-way radios, this type of interference produces moving ripples or diagonal streaks in the picture. Some cases may cause a loss of contrast in the picture. Changing the direction and position of the antenna or installing an RFI filter may improve the picture. CARE AND MAINTENANCE To prevent fire or shock hazard, disconnect the TV/DVD from the power source before cleaning. Use caution when cleaning or wiping the plastic parts. 71 52G0101A P69-Back.indd 71 1/5/09 3:08:43 PM

Others Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” 65 . Language Name Code Language Name Code Language Name Code Language Name Code Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Afar 1111 Finnish 1619 Lithuanian 2230 Slovak 2921 Afrikaans 1116 French 1628 Macedonian 2321 Slovenian 2922 Albanian 2927 Frisian 1635 Malagasy 2317 Somali 2925 Amharic 1123 Galician 1722 Malay 2329 Spanish 1529 Arabic 1128 Georgian 2111 Malayalam 2322 Sundanese 2931 Armenian 1835 German 1415 Maltese 2330 Swahili 2933 Assamese 1129 Greek 1522 Maori 2319 Swedish 2932 Aymara 1135 Greenlandic 2122 Marathi 2328 Tagalog 3022 Azerbaijani 1136 Guarani 1724 Moldavian 2325 Tajik 3017 Bashkir 1211 Gujarati 1731 Mongolian 2324 Tamil 3011 Basque 1531 Hausa 1811 Nauru 2411 Tatar 3030 Bengali; Bangla 1224 Hebrew 1933 Nepali 2415 Telugu 3015 Bhutani 1436 Hindi 1819 Norwegian 2425 Thai 3018 Bihari 1218 Hungarian 1831 Oriya 2528 Tibetan 1225 Breton 1228 Icelandic 1929 Panjabi 2611 Tigrinya 3019 Bulgarian 1217 Indonesian 1924 Pashto, Pushto 2629 Tonga 3025 Burmese 2335 Interlingua 1911 Persian 1611 Turkish 3028 Byelorussian 1215 Irish 1711 Polish 2622 Turkmen 3021 Cambodian 2123 Italian 1930 Portuguese 2630 Twi 3033 Catalan 1311 Japanese 2011 Quechua 2731 Ukrainian 3121 Chinese 3618 Javanese 2033 Rhaeto-Romance 2823 Urdu 3128 Corsican 1325 Kannada 2124 Romanian 2825 Uzbek 3136 Croatian 1828 Kashmiri 2129 Russian 2831 Vietnamese 3219 Czech 1329 Kazakh 2121 Samoan 2923 Volapük 3225 Danish 1411 Kirghiz 2135 Sanskrit 2911 Welsh 1335 Dutch 2422 Korean 2125 Scots Gaelic 1714 Wolof 3325 English 1524 Kurdish 2131 Serbian 2928 Xhosa 3418 Esperanto 1525 Laothian 2225 Serbo-Croatian 2918 Yiddish 2019 Estonian 1530 Latin 2211 Shona 2924 Yoruba 3525 Faroese 1625 Latvian, Lettish 2232 Sindhi 2914 Zulu 3631 72 52G0101A P69-Back.indd 72 1/5/09 3:08:43 PM

Specifications Model 19LV610U / 19LV611U 22LV610U / 22LV611U 26LV610U General Power supply AC 120V 60Hz Operation: 38 W, Operation: 51 W, Operation: 102 W, Power consumption Stand by: 0.8 W Stand by: 0.8 W Stand by: 0.7 W Weight 11.2 lbs (5.1 kg) 13.5 lbs (6.1 kg) 19.4 lbs (8.8 kg) Width: 18-3/4 inches (476 mm) Width: 21-5/8 inches (550 mm) Width: 26-13/16 inches (681 mm) Dimensions Height: 14-5/16 inches (364 mm) Height: 16 inches (407.1 mm) Height: 20-1/4 inches (513.9 mm) Depth: 8-1/8 inches (207 mm) Depth: 8-1/8 inches (207 mm) Depth: 8-15/16 inches (226.7 mm) Operating temperature 5°C-40°C (41°F-104°F) Operating humidity Less than 80% RH (No condensation) Television LCD panel (Screen size is 18.5-inch diagonal 21.6-inch diagonal 26.01-inch diagonal approximate.) Display method Color TFT LCD Number of pixels 1366 (Horizontal) x 768 (Vertical) Television system NTSC standard, ATSC standard (8VSB), QAM VHF: 2-13 Receiving channels UHF: 14-69 CATV: 1-135 (4A, A-5~A-1, A~I, J~W, W+1~W+94) Antenna input VHF/UHF 75 Ω 1-5/8 x 4-13/16 inches Speaker 1 x 2-13/16 inches (25.4 x 71.1 mm), 8 Ω x 2 (40.6 x 121.9 mm), 8 Ω x 2 Audio output power 1.5W + 1.5W 5.0W + 5.0W DVD/CD player Signal system NTSC 1. DVD (12cm, 8cm) Applicable disc 2. CD (12cm, 8cm) Pickup 1-Lens, 2-Beams System Input/Output (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1 S-Video input (C) 1.0 V (p-p), 75 Ω Others (Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack x 1 ColorStream video input (PB, PR) 0.7 V (p-p), 75 Ω, pin jack x 2 1.0 V (p-p), 75 Ω, negative Video input 1.0 V (p-p), 75 Ω, negative sync., pin jack x 1 sync., pin jack x 2 Audio input –8dBm, 50 kΩ, negative sync., pin jack (L/R) x 2 –8dBm, 50 kΩ, negative sync., Audio output – pin jack (L/R) x 1 HDMI compliant (type A connector), HDCP compliant, E-EDID compliant HDMI input Suggested scan rates: 480i, 480p, 720p, 1080i, 1080p HDMI Audio: 2-channel PCM, 32/44.1/48 kHz sampling frequency, 16/20/24 bits per sample PC input MONITOR: Mini-Dsub 15pin x 1, AUDIO: 3.5ø mm Stereo jack x 1 Digital audio output 0.5 V (p-p), 75 Ω, pin jack x 1 (Coaxial) Headphone ø3.5mm stereo mini jack x 1 – Accessories Remote control (19LV610U/22LV610U/26LV610U: SE-R0305, 19LV611U/22LV611U: SE-R0316)....................................................... 1 Batteries (R03/AAA) ............................................................................................................................................................................ 2 AC cord ................................................................................................................................................................................................ 1 Cleaning cloth .............................................................................. ........................................................................................................ 1 Ownerʼs manual (this booklet) ..................................................... ........................................................................................................ 1 Quick setup guide (Spanish) ................................................................................................................................................................ 1 • This model complies with the above specifications. • Designs and specifications are subject to change without notice. • This model may not be compatible with features and/or specifications that may be added in the future. 73 52G0101A P69-Back.indd 73 1/6/09 10:39:26 AM

Others Limited United States Warranty LCD TV/DVD Combination - Depot Repair Warranty Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS LCD TV/DVD COMBINATION AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. LCD TV/DVD COMBINATIONS PURCHASED IN THE U.S.A. AND USED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE WARRANTIES. LCD TV/DVD COMBINATIONS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES. Limited One (1) Year Warranty on Parts and Labor Your Responsibility TACP warrants this LCD TV/DVD Combination THE ABOVE WARRANTIES ARE SUBJECT TO and its parts against defects in materials or THE FOLLOWING CONDITIONS: workmanship for a period of one (1) year after the date of original retail purchase. DURING (1) You must retain your bill of sale or provide THIS PERIOD, TACP WILL, AT TACPʼS OPTION, other proof of purchase. REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT (2) All warranty servicing of this LCD TV/DVD CHARGE TO YOU. Combination must be made by the Depot Warranty Repair Center specified by the TACP Rental Units Consumer Solutions Center. The warranty for LCD TV/DVD Combination rental units begins on the date of the first rental or thirty (3) The warranties from TACP are effective only (30) days after the date of shipment to the rental if the LCD TV/DVD Combination is purchased firm, whichever comes first. and operated in the Continental U.S.A. or Puerto Rico. Commercial Units LCD TV/DVD Combinations sold and used for (4) Labor service charges for set installation, commercial purposes have a limited warranty for all setup, adjustment of customer controls, and parts and labor, which warranty begins on the date installation or repair of antenna systems are not of original retail purchase and ends on the date that covered by this warranty. Reception problems is ninety (90) days thereafter. caused by inadequate antenna systems are your responsibility. Ownerʼs Manual and Product Registration Card Read this ownerʼs manual thoroughly before operating (5) Warranties extend only to defects in materials this LCD TV/DVD Combination. or workmanship as limited above, and do not extend to any LCD TV/DVD Combination or Complete and mail the enclosed product registration parts that have been lost or discarded by you card or register your LCD TV/DVD Combination or to damage to the LCD TV/DVD Combination online at www.tacp.toshiba.com/service as soon as or parts caused by fires, misuse, accident, possible. By registering your LCD TV/DVD Acts of God (such as lightning or fluctuations in Combination you will enable TACP to bring you electric power), improper installation, improper new products specifically designed to meet your maintenance, or use in violation of instructions needs and help us to contact you in the unlikely furnished by TACP; use or malfunction event a safety notification is required under the through simultaneous use of this LCD TV/DVD U.S. Consumer Product Safety Act. Failure to Combination and connected equipment; or to complete and return the product registration card units that have been modified or had the serial does not diminish your warranty rights. number removed, altered, defaced, or rendered illegible. 74 52G0101A P69-Back.indd 74 1/5/09 3:08:44 PM

How to Obtain Warranty Services No person, agent, distributor, dealer, or company If, after following all of the operating instructions is authorized to change, modify, or extend in this manual and checking the section the terms of these warranties in any manner “Troubleshooting,” you find that service is needed: whatsoever. The time within which an action must be commenced to enforce any obligation of TACP (1) For instructions on how to obtain warranty arising under the warranty or under any statute service for your LCD TV/DVD Combination, or law of the United States or any state thereof is contact TACPʼs Consumer Solution Center toll hereby limited to ninety (90) days from the date free at 1-800-631-3811. you discover, or should have discovered, the (2) You must include a copy or original bill of defect. This limitation does not apply to implied sale or other proof of purchase along with warranties arising under state law. the entire LCD TV/DVD Combination to the Depot Warranty Repair Center specified by THIS WARRANTY GIVES YOU SPECIFIC LEGAL the TACP Consumer Solutions Center. You RIGHTS AND YOU MAY ALSO HAVE OTHER are responsible for all inbound transportation RIGHTS WHICH MAY VARY FROM STATE TO and insurance charges for the LCD TV/DVD STATE IN THE U.S.A. SOME STATES OF THE Combination to the Depot Warranty Repair U.S.A. DO NOT ALLOW LIMITATIONS ON HOW Center specified by the TACP Consumer LONG AN IMPLIED WARRANTY LASTS, WHEN Solutions Center. AN ACTION MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL For additional information, visit TACPʼs website: OR CONSEQUENTIAL DAMAGES, SO THE www.tacp.toshiba.com ABOVE PROVISIONS MAY NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES. ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND SIMILAR Others OBLIGATIONS OF TACP WITH RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL TACP BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, BUSINESS INTERRUPTION, OR MODIFICATION OR ERASURE OF RECORDED DATA CAUSED BY USE, MISUSE OR INABILITY TO USE THIS LCD TV/DVD COMBINATION). 75 52G0101A P69-Back.indd 75 1/5/09 3:08:45 PM

ColorStream and TheaterWide are registered trademarks of Toshiba America Consumer Products, L.L.C. J52G0101A SH 09/01 N Printed in Thailand 52G0101A P69-Back.indd 76 1/5/09 3:08:45 PM