Neurio W1 Specifications

Wednesday, July 19, 2017

NEURIO SENSOR W1 TM OVERVIEW The Neurio Sensor W1™ is a load & generation meter that is easily installed in a breaker panel and transmits the data using a homeowner’s Wifi network. INSTALLATION: Neurio Sensor W1™ is easily installed inside a standard breaker panel. Two current transformers are looped around the main power lines, and Neurio Sensor W1™ is wired directly into an existing breaker. Once the sensor is installed, the software will guide the installer or homeowner to connect the sensor to the home’s WiFi network. Typical installation time for a qualified professional is under 15 minutes. OFF O FF For homes with solar or wind generation systems, net consumption monitoring is possible. In these configurations, an expansion kit is required so that four CTs in total are connected to the Neurio Sensor W1™. SPECIFICATIONS Accuracy: 1% Resolution: 1W Power, 1Wh Energy Power Consumption: <2W Radio Standard: WiFi, 802.11b/g/n  Radio Operating Frequency: 2.4 GHz Radio Transmit Power: +19dBm Receive Sensitivity: -97dBm Current Transformers:  264A, 19mm Power Source: 120V AC, handwired within panel Dimensions: 14 cm x 3.5 cm x 7.75 cm Certifications: UL/CSA 61010-1, FCC, IC, ETSI Warranty: 1 year For more information, visit or email us at [email protected]