Frigidaire FFHP182SQ2 FFHP362SQ2 FFMS181SQ2 Manual

Wednesday, March 29, 2017

All about the Use &Care of your Split Type Room Air Conditioner Refer to Page 2 for table of contents. USA 1-866-942-1567 Canada 1-866-942-1567

Welcome to the world of simple handling and no worries Thank you for choosing Frigidaire. This manual contains all of the information required to guarantee your safety and the appropriate use of your air conditioner. Please read all of the instructions before using the air conditioner and keep this manual for future reference. We know you will enjoy your new air conditioner and thank you for choosing our product. We hope you will consider us for future purchases. Environmental advices The packaging material used is recyclable. We recommend that you separate plastic, paper and cardboard and give them to recycling companies. do NOT throw it away with the rest of your domestic If you need to dispose of this appliance in the future, garbage. Attention!! The air conditioner that you have bought may be slightly different from the one illustrated in this manual. Please refer to the information related to the model you have. This air conditioner is for domestic use only. It is not recommended for heavy commercial or industrial use. 01 Welcome

Contents 01. Welcome..........................................................................................01 02. Environmental advices........................................................................01 03. Contents...........................................................................................02 04. Safety precautions............................................................................. 05 05. Operation: 5.1 Preparing the device for operation.........................................06 5.2 Product description.............................................................. 08 5.3 Remote control.................................................................... 09 - Remote control operation - Remote control specifications - Remote control battery - When should the batteries be replaced - To replace batteries - Remote control instructions 5.4 Remote control description.................................................... 11 5.5 Special functions..................................................................12 5.6 How the air conditioner works...............................................13 - Automatic operation - Cool/heat and fan only operation - Dry operation - Airflow direction adjustment - Sleep mode - Timer operation - Optimal operation 5.7 How to use the indoor unit....................................................17 - Adjusting air flow direction - Adjusting the vertical air flow direction (up/down) - To set the horizontal air flow direction (left/right) - To automatically swing the air flow direction (up/down) 5.8 Manual operation................................................................ 19 06. Maintenance.....................................................................................20 07. Operation tips...................................................................................22 08. Solution for problems......................................................................... 24 09. Warranty..........................................................................................26 Contents 02

Safety precautions This appliance must be installed by a qualified licensed HVAC technician in accordance with all applicable codes. All electrical connections should be performed by a licensed electrician. Manufacturer's warranty will be voided with failure to comply. Incorrect Handling cound result in Serious Injury or Death! 1. Do not attempt to install the split air 11. Do not climb on or place objects conditioner by yourself. on the outdoor unit. 2. This air conditioner contains no 12. Do not hang objects off the indoor user-serviceable parts. Always call unit. an authorized Electrolux servicer 13. Do not place objects containing for repairs. water on the indoor and/or 3. When moving the air conditioner, outdoor units. always call an authorized Frigidaire 14. Turn off the air conditioner at the servicer for disconnection and re- power source when it will not be installation. used for an extended period of 4. Do not insert fingers or place time. objects into the discharge area in 15. Periodically check the condition of the front of the indoor unit. the outdoor unit’s installation base 5. Do not insert fingers or place for any damage. objects into the discharge area in 16. Do not apply heavy pressure to the front of the outdoor unit. the coil fins of the indoor and/or 6. Do not start or stop the air outdoor units. conditioner by turning off the power 17. Operate the indoor unit with air at the electrical box. filters in place. 7. In the event of a malfunction (sparks, 18. Do not block or cover the intake burning smell, etc.) immediately grille, discharge area and outlet power off unit and call an ports. authorized Frigidaire servicer. 19. Ensure that any electrical/ 8. Do not operate the air conditioner electronic equipment is 36” away with wet hands. from the indoor unit and outdoor 9. Do not drink any water or unit. condensation that is drained from 20. Do not use or store flammable the air conditioner. gases near the indoor and/or 10.Provide occasional ventilation outdoor units. during use. Do not direct airflow at fire places or other heat related sources as this could cause flare ups or make units run excessively. 03 Satety precautions

To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring of instructions may cause harm or damage. The seriousness is classified by the following indications. 1. Connect with the power properly (confirm voltage upon installation). Otherwise, it may cause electric shock or fire due to excess heat generation. 2. Always ensure effective grounding. No grounding may cause electric shock. 3. Disconnect the power if strange sounds, smell, or smoke comes from it. It may cause fire and electric shock. 4. Do not operate or stop the unit by switching the power off and on. It may cause electric shock or fire due to heat generation. 5. Do not operate with wet hands or in damp environment. It may cause electric shock. 6. Do not allow water to run into electric parts. It may cause component failure, electric shock or fire. 7. Do not use the power cord near flammable gas or combustibles, 9. Do not damage or use an such as gasoline, benzene, unspecified power cord. It may thinner,etc. It may cause an cause electric shock or fire. explosion or fire. 10.Do not place heavy objects on the 8. Do not use the power cord close to power cord and ensure that the heating appliances. It may cause cord will not be compressed. There fire and electric shock. is danger of fire or electric shock. Safety precautions 04

11. Do not open the unit during operation. It may cause electric shock or injury. 12. Do not drink water drained from air conditioner. It may contain contaminates that could make you sick. 13. Do not disassemble or modify unit. It may cause failure of appliance, electric shock and void the warranty. 14. When the air filter is to be removed, do not touch the metal parts of the unit. It may cause an injury. 15. When the unit is to be cleaned, power off, and turn off the circuit breaker. Do not clean unit when power is on as it may cause fire, electric shock or injury. 16. Avoid direct exposure of occupants to air flow. 17. Turn off the main power switch when not using the unit for a long time. 18. The air conditioner may be dusted with an oil free cloth or washed with a cloth dampened in a solution of warm water and mild dishwashing detergent. Rinse thoroughly and wipe dry. Wring excess water from cloth before wiping around controls. 19. Always insert the filters securely. Clean filter once every two weeks. Operation without filters may cause failure. 20. Always install circuit breaker and 21. Do not place obstacles around a dedicated power circuit. No air-inlets or inside of air-outlet. It installation may cause fire and may cause failure of appliance or electric shock. accident. 05 Safety precautions

Preparing the device for operation 1. Contact a licensed specialist to install the device. 2. Guarantee that the unit is appropriately fastened and complies with all of the aforementioned safety norms. 3. Before operating the air conditioner, ensure that the air filter is installed correctly. 4. If the unit has been out of use for a long period of time, it is recommended that the air filter be cleaned before use. During continuous use, clean the air filter every two weeks. 5. This air conditioner was designed for use under the following conditions: MODE Cool Heat * Dehumidifier Temperature Temperature Temperature Indoor Outdoor Indoor Outdoor Indoor Outdoor 61°F~86°F -5°F~110°F 61°F~86°F -5°F~75°F 61°F~86°F -5 °F~110°F * only for models with heating function Attention!! If air conditioner is used outside of the above conditions, certain safety protection features may come into operation and cause the unit to function abnormally. Room relative humidity should be less than 80%. If the air conditioner operates in excess of this figure, the surface of the air conditioner may attract condensation. Please set the horizontal louver to its maximum angle (vertically to the floor), and set HIGH fan mode. Optimum performance will be achieved within these operating temperature. Preparing the device for operation 06

Product description Air inlet 2 1 1 Front panel Indoor unit 3 2 Air filter (beneath front panel) 3 Horizontal airflow grille 4 4 Vertical airflow grille 7 Air outlet 6 5 Temperature sensor 5 (inside the indoor unit) 6 Display 9 12 7 Infrared signal receiver Air inlet 8 Refrigerant gas connection 9 Remote control 10 Connecting cable 11 Detection valve and packed valve shield 10 12 Drain hose and refrigerant connecting pipe 8 Air outlet 11 Outdoor unit Attention!! All the pictures in this manual are for explanation purpose only. They maybe slightly different from the airconditioner you purchased. 07 Product description

Display panel (indoor unit) 13 HEAT indicator: This indicator illuminates when the air conditioner is in heat operation. 14 COOL indicator: This indicator illuminates when the air conditioner is in cool operation. 15 DIGITAL SCREEN: Show the present adjustments to temperature when air conditioner is operating. 16 OPERATION indicator: This 13 14 15 16 17 indicator illuminates red after power is on and illuminates green when the unit is in operation. 17 DRY (DEHUMIDIFICATION) indicator: This indicator illuminates when the air conditioner is in dry operation. Attention!! The description of the control is based on a typical model.The functions are the same in your air conditioner, even if there are some differences in the appearance. Product description 08

Remote control Remote control operation 1. Operation mode: Cool, Heat (Only for models with heating function), DRY, FAN, and AUTO (Automatic). 2. 24 hrs Timer. 3. Internal temperature range selection: 61ºF - 86ºF 4. LCD REMOTE CONTROL SPECIFICATIONS Rated voltage 3V Lowest voltage of CPU emiting signal 2.4 V Transmission distance 32-4/5'* Environment 23ºF ~ 140ºF * With 3 V, reaches 40' Attention!! 1. The air conditioner will not operate when curtains, doors or other materials block the signals between the remote control and the indoor unit. 2. Avoid spilling any liquid in the remote control. Do not expose to sunlight or any heat source. 3. If the infrared signal receiver in the indoor unit is exposed to sunlight, the air conditioner unit might not work properly. Use curtains or shades to avoid having sunlight directly to the receiver. 4. If other electrical equipments react to the signals sent by the remote control, change their position or consult with you local dealer. Remote control battery: To use the remote control, it is necessary to install two alkaline AAA batteries. 09 Remote control

When should the batteries be Remote control instructions replaced 1. The signal reach distance of the 1. There is not a "beep" anymore remote control to the receiver that from the indoor unit when using is inside the indoor unit of the the control remote or the signallight air conditioner is 32 feet. Any indicator does not light. obstruction placed between the 2. The indoor unit does not respond receiver and the remote control to the remote control commands to can cause interference, limiting the activate the programs. capacity of the programming. 2. Any time when a button is pressed To replace batteries on the remote control, the air 1. Slide out the battery compartment conditioner emits a "beep" that cover ( located at the back of the indicates that a command has been remote control). received and transmitted to the 2. Install two AAA batteries in indoor unit. the compartment (indicated in 3. When selecting the function of timer, the drawing located inside the the remote control (automatically) compartment). sends a signal to the indoor unit at 3. Slide on the battery component the specific period. If the remote cover. control is left in a position that the 4. If the remote control is not operated signal is blocked, a 15 minute for long period of times, batteries delay can be produced. should be discarded. Attention!! 1. When replacing batteries, do not use old batteries or a different type battery. This may cause the remote control to malfunction. 2. If you do not use the remote controller for several weeks, remove the batteries. Otherwise battery leakage may damage the remote controller. 3. The average battery life under normal use is about 6 months. 4. Replace the batteries when there is no answering beep from the indoor unit or if the transmission indicator fails to light. Remote control 10

Remote control description Connective pipe and drainage installation 1 ON/OFF: Press this button to start Cooling and heating model the unit operation. Push the button again to stop the unit operation. 2 MODE: Each time you press the button, a mode is selected in a sequence that goes from AUTO, COOL, DRY (DEHUMIDIFICATION), FAN and HEAT*, as the following figure indicates: 1 2 4 3 AUTO COOL DRY FAN HEAT* 5 6 9 7 * Note: Only for models with heating function 10 8 11 13 3 +: Press the button to increase 12 14 the indoor temperature setting. 4 –: Press the button to decrease the indoor temperature setting. 5 FAN: This button is used for setting Fan Speed in the which indicates the horizontal sequence that goes from louver will swing up and AUTO, , to , then down automatically. back to AUTO. 7 TIMER ON: Press this button Auto to initiate the auto-on timer. Low fan Middle fan High fan To cancel the auto-timer program, simply press this 6 : Press this button, to set up button again. swing angle and swing range, which circularly changes as below: 8 TIMER OFF: Press this button to initiate the auto-off timer. To cancel the auto-timer program, simply press the OFF button again. 11 Remote control description

9 CLOCK: Press this button, cool air with super high fan the clock can be set up, speed. In heating mode, the icon blinks. Within 5 unit will blow strong hot air seconds, the value can be with super high fan speed. adjusted by pressing "+" or "-" 13 SLEEP: Press this button to button, if continuously press this go into the SLEEP operation button for 2 seconds above, in mode. Press it again to every 1/2 second, one minute cancel. This function only will be increased, if you are can be used in COOL, HEAT still pressing the button after (Only for models with heating ten minutes increased, ten function) or DRY mode, and minutes will be increased every maintain the most comfortable 1/2 second. During blinking, temperature for you. To repress the Clock button and cancel SLEEP program, press icon will be constantly this button again. displayed and it denotes the setting has succeeded. 14 LIGHT: Turn the unit LED light on or off only. 10 BLOW: When in cool or dry mode, press "BLOW" button to active or deactive blow function, the icon will display and the Special functions indoor fan will continually run for 10 minutes in order to dry 1. ABOUT LOCK the indoor unit even though you Press"+"and "-"buttons have turned off the unit. simultaneously to lock or unlock 11 TEMP: When pressing "TEMP" the keypad. If the remote button, there may be 3 optional controller is locked, the iconwill icon display: , , . But be displayed on it, in that case, only is effective. The display press any button, the mark will panel will indicate ambient flicker for three times. Repress the temperature for 5 seconds. combination to unlock. 12 TURBO: Press this button to 2. To switch between activate/deactivate the Turbo Fahrenheit and Celsius function which enables the unit Under status of unit off, to reach the preset temperature press "MODE" and "-"buttons in the shortest time. In cooling simultaneously to switch oC and o mode, the unit will blow strong F. Remote control description 12

How the air conditioner works Automatic operation When the Air Conditioner is ready for use, switch on the power and the OPERATION indicator lamp on the display panel of the indoor unit starts illuminating. 1. Use the MODE button to select AUTO. 2. Use the "MODE" button to select Auto. The unit will automatically select Cool, Fan and Heat operation depending on the difference ambient temperature and system difference temperature. When in Cool Operation the panel o o will display 77 F. In Fan Operation the panel will display 77 F. In Heat o Operation the panel will display 68 F. 3. Press the ON/OFF button again to stop the unit operation. Attention!! 1. When you set the air conditioner in AUTO mode, it will automatically select cooling, heating (only for models with heating function) or fan only operation depending on the room temperature. 2. If the AUTO mode is uncomfortable, you can select desired conditions manually. COOL / HEAT and FAN ONLY operation 1. If the AUTO mode is not comfortable, you may manually override the settings by using COOL, HEAT* or FAN ONLY** mode. 2. Press the "+"/"-" button to set the desired room temperature. When in COOL mode, the most comfortable settings are 70 ºF or above. When in HEAT mode, the most comfortable settings are 82 ºF or below. 3. Press the FAN to select the FAN mode of AUTO, , or . 4. Press the ON/OFF button, the operation lamp lights and the air conditioner start to operate as your settings. Press the ON/OFF button again to stop this unit operation. * Note: Only for models with heating function. **Note: The FAN ONLY mode can not be used to control the temperature. While in this mode, only steps 1,3 and 4 may be performed. 13 How the air conditioner works

DRY (DEHUMIDIFICATION) operation The dry mode will automatically select the drying operation based on the Attention!! difference between the set temperature Due to the difference between the and the actual room temperature. set temperature of the unit and The temperature is regulated while the actual indoor temperature, the dehumidifying by repeatedly turning Air Conditioner in DRY mode will on and off of the cooling operation automatically switch the operation or fan only. The fan speed is mainly modes between COOL and FAN LOW. ONLY many times. 1. Press the MODE button to select DRY. 2. Press the "+"/ "-" button to set the g g g ly ly n n n oli oli oli on on desired temperature from 61 ºF to Co Co Co n n Fa Fa 86 ºF. 3. Press the ON/OFF button, the Room operation lamp lights and the air Temperature Time conditioner starts to operate in the Set temperature DRY mode. FAN SPEED is Low. Push the ON/OFF button again to DRY FUNCTION stop this unit operation. Air flow direction adjustment Use button to adjust the airflow direction up and down. When button is pressed, the horizontal louver moves up and down automatically. Press again to stop operation. Attention!! If the louver oscillates or moves in a position that could affect the cooling or heating (only for models with heating function) of the air conditioner, the direction of the oscillation/movement would alter automatically. How the air conditioner works 14

SLEEP mode(Only for >12000 Btu's) Press the sleep button to activate the sleep mode. To deactivate, press the button again. In cooling mode:   

  2 °F temperature controlled. 2 °F Set 

   increase 2 oF per hour in a 2 hour 1 hour 1 hour 7 hours period. The set temperature will be steady for the next 5 hours, then this SLEEP FUNCTION (Cooling mode) mode will be terminated. In heating mode (only for models with temperature heating function): Set   

  2 °F controlled. 2 °F 

   decrease 2 oF per hour in a 2 hour period. The set temperature will be 1 hour 1 hour 7 hours steady for the next 5 hours, then this mode will be terminated. SLEEP FUNCTION (Heating mode) TIMER Operation TIMER button can set the auto-on time of the unit. To set the starting time: 1. Press the "TIMER ON" button to activate the auto start timer function.Auto start can be set from 0~24 hours. After pressing "TIMER ON" button, "ON" on the display will blink, and during 5 seconds blinking, the value can be adjusted by pressing "+" or "-" button. Every press of this button,1 minute will be increased or decreased, but continuously press the "+" or "-" button, 2 seconds later the value will be increased or decreased automalically, and after 10 minutes increase or decreased, the value will be changed 10 minutes every 0.5 second; Press the "TIMER ON" button to conform the time. 2. when repressing the "TIMER ON" button, the "TIMER ON" setting will be canceled. 15 How the air conditioner works

To set the stopping time 1. Press the "TIMER OFF" button to activate the auto start timer function. 2. The method of setting is the same as above of"TIMER ON". Examples: ON ON ON ON ON OFF OFF OFF OFF OFF 6h 6h 12h 14h 20h 23h (Timer On) (Timer Off) (Timer Off) (Timer On) (Timer On) (Timer Off) Optimal operation To achieve optimal performance, please note the following: 1. Adjust the air flow direction correctly so that it is not directed on people. 2. Adjust the temperature to achieve the highest comfort level. Do not adjust the unit to excessive temperature levels. 3. Close doors and windows on COOL or HEAT (only for models with heating function) mode, or performance may be reduced. 4. Use TIMER ON button on the remote controller to select a time you want to start your air conditioner. 5. Do not put any object near air inlet or air outlet, as the efficiency of the air conditioner may be reduced and the air conditioner may stop running. 6. Clean the air filter periodically, otherwise cooling or heating (only for models with heating function) performance may be reduced. 7. Do not operate unit with horizontal airflow grille in closed position. How the air conditioner works 16

How to use the indoor unit Adjusting air flow direction Adjust the air flow direction properly, otherwise it might cause discomfort or uneven room temperatures. Adjust the horizontal louver using the remote controller. Adjust the vertical louver manually. To set the horizontal air flow direction (left/ right) Adjust the vertical louver manually using the lever on the left or right side of the vertical louver arm (Depending onthe specific model you choose), or move the lever at the left (or right, or middle which is only for 21400- 36000 Btu's, depending on the specific model you choose) end of the air outlet to the desired position. Perform these adjustments before you start the unit because once it has been started, there is risk of your fingers getting caught on the fan. To automatically swing the air flow direction (up/down) Perform this function while the air conditioner is in operation. Press the button on the remote controller. To stop the function, press the button again. Lever Press to lock louver in desired position. 17 How to use the indoor unit

The button will be disabled when the air conditioner is not in operation (including when the TIMER ON is set). Do not operate the air conditioner for long periods with the air flow direction set downward in cooling or dry mode. Otherwise, condensation may occur on the surface of the horizontal louver and drop on to the floor or on furnishings. Do not move the horizontal louver manually. Always use the button. If youmove this louver manually, it may malfunction during operation. If the louver malfunctions, stop the airconditioner and restart it. Open angle of the horizontal louver should not be set too small, as COOLING or HEATING (only for models with heating function) performance may be impaired due to too restricted air flow area. Do not operate unit with horizontal louver in closed position. When the air conditioner is connected to power (initial operation), the horizontal louver may generate a sound for 10 seconds, this is a normal operation. How to use the indoor unit 18

Manual operation (without remote control) Manual operation can be used temporarily in case you can not find the remote controller or its batteries are exhausted. 1. Open and lift the front panel up to an angle until it remains fixed with a clicking sound. 2. One press of the manual control button will lead to the forced AUTO operation. 3. Close the panel firmly to its original position. Manual control button Auto/OFF Attention!! Once you press the manual button, the operation mode is shifted in an order as: AUTO and OFF. The manual operation is mainly used for testing purpose. Do not choose it unless it is necessary. To return to the remote controller operation, use the remote controller. 19 Manual operation

Maintenance Cleaning the indoor unit and remote controller. 1. It is necessary to stop the air conditioner and disconnect the power supply before cleaning. 2. Use a dry cloth to wipe the indoor unit and remote controller. 3. A cloth dampened with cold water may be used on the indoor unit if it is very dirty. 4. The front panel of the indoor unit can be removed and cleaned with water. Then wipe it with a dry cloth. 5. Do not use a chemically treated cloth or duster to clean the unit. 6. Do not use benzine, thinner, polishing powder, or similar solvents for cleaning. These may cause the plastic surface to crack or deform. Cleaning the air filter A clogged air filter reduces the cooling efficiency of this unit. Please clean the air filter filter once every 2 weeks. 1. Lift the indoor unit panel up to an angle until it stops with a clicking sound. 2. Grab the handle of the air filter and lift it up slightly to take it out from the filter holder, then pull it downwards. 3. Remove the air filter (Fresh air filter if so equipped + support frame) from air filter the unit. Maintenance 20

Maintenance If you plan to idle the unit for a long time, perform the following: 1. Operate in fan mode for about half a day to dry the inside of the unit. 2. Stop the air conditioner and disconnect power. Remove the batteries from the remote controller. 3. The outdoor unit requires periodic maintenance and cleaning. Do not attempt to do this yourself. Contact your dealer or servicer. If you plan to idle the unit for a long time, perform the following: 1. Check that the wiring is not broken or disconnected. 2. Check that the air filter is installed. 3. Check whether the air outlet or inlet is blocked after the air conditioner has not been used for a long time. 21 Maintenance

Operation tips The following events may occur during normal operation. Protection of the air conditioner. Compressor protection This unit comes with a time delay function to help protect the compressor,please allow 3 minutes for the compressor to restart upon turning on the unit. Anti-cold air (Only for models with heating function) The unit is designed not to blow cold air in HEAT mode when the indoor heat exchanger is in one of the following three situations and the set temperature has not been reached. 1. When heating has just starting. 2. Defrosting. 3. Low temperature heating. Defrosting (Only for models with heating function) Frost may be generated on the outdoor unit during heat cycle when outdoor temperature is low and humidity is high resulting in lower heating efficiency of the air conditioner. During this condition, air conditioner will stop heating operation and start defrosting automatically. The time of defrosting may vary from 0 to 8 minutes according to the outdoor temperature and the amount of frost buildup on the outdoor unit. The indoor or outdoor fan will stop running when defrosting (Only for models with heating function). The indoor unit will display "H1" code when defrosting, it's normal. A white mist coming out from the indoor unit A white mist may generate due to a large temperature difference between air inlet and air outlet in COOL mode in an indoor environment that has high relative humidity. A white mist may generate due to moisture generated from defrosting process when the air conditioner restarts in HEAT mode operation after defrosting. Low noise of the air conditioner You may hear a low hissing sound when the compressor is running or has just stopped running. This sound is the sound of the refrigerant flowing or coming to stop. You can also hear a craching sound when the compressor is running or has just stopped running. This is caused by heat expansion and cold contraction of the plastic parts in the unit when the temperature is changing. A noise may be heard due to louver returning to its original position when power is first turned on. Operation tips 22

Dust is blown out from the indoor unit. This is a normal condition when the air conditioner has not been used for a long time or during first use of the unit. A peculiar smell comes out from the indoor unit. This is because the indoor unit gives off smells permeated from building material, furniture or smoke. The air conditioner turns to FAN only mode from COOL or HEAT (Only for models with heating function) mode. When indoor temperature reaches the temperature setting on air conditioner, the compressor will stop automatically, and the air conditioner turns to FAN only mode. The compressor will start again when the indoor temperature rises in COOL mode or falls in HEAT mode (Only for models with heating function) to the set point. Dripping water condenses on the surface of indoor unit Dripping water may generate on the surface of the indoor unit when cooling in a high relatively humidity (relative humidity higher than 80%). Adjust the horizontal louver to the maximum air outlet position and select HIGH fan speed. Heating mode (Only for models with heating function) The air conditioner draws in heat from the outdoor unit and releases it via the indoor unit during heating operation. When the outdoor temperature falls, heat drawn in by the air conditioner decreases accordingly. At the same time, heat loading of the air conditioner increases due to larger difference between indoor and outdoor temperature. If a comfortable temperature can't be achieved by the air conditioner, we suggest you use a supplementary heating device. Auto-restart function Power failure during operation will stop the unit completely. For the unit without Auto-restart feature, when the power restores, the OPERATION indicator on the indoor unit starts illuminating. To restart the operation,press the ON/OFF button on the remote controller. For the unit with Auto-restart feature, when the power restores, the unit restarts automatically with all the previous settings preserved by the memory function. Lightning or a wireless telephone operating nearby may cause the unit to malfunction. Disconnect the unit with power and then re-connect the unit with power again. Push the ON/OFF button on the remote controller to restart operation. 23 Operation tips

Solution for problems If your air conditioner malfunctions, check the following information to find solutions or probable causes of the failure. Do not try to repair the unit by yourself, if these solutions do not solve the failures, call your local service repair team. Poor Equipment performance 1. The air outlet or inlet of outdoor unit is obstructed. 2. The air outlet or inlet of indoor unit is obstructed. 3. The outdoor temperature is high due to direct sunlight or another heat source. 4. A heater or a cooking stove is being used in the same room. 5. The room is occupied by multiple people, thus raising the heat load. 6. The air filter is obstructed by dust or is dirty. 7. Inappropriate temperature adjustment. 8. The capacity of the equipment is not adequate for the size of the room. 9. Air conditioner was just turned on. 10.Windows or doors are open. The unit does not start 1. No power supply. 2. The voltage is not sufficient or incorrect. 3. Temperature is not adjusted properly. 4. Fuse may have blown. 5. The remote control batteries need to be replaced. 6. The time you have set with timer is incorrect. Attention!! Stop the air conditioner immediately if one of the following malfunctions occur 1. The operation indicator flashes (5 times per second) and the flashing does not stop by disconnecting the power and then restarting the unit. 2. Fuse blows frequently or circuit breaker trips frequently. (If this occurs, please contact your installer or licensed contractor). 3. Water spills over the equipment. 4. Remote control does not work. 5. Any other abnormal situations. Solution for problems 24

Major Appliance 5 Year Parts Only Limited Warranty Your appliance is covered by a five year parts only limited warranty. For five years from your original date of purchase, Electrolux will pay for the cost of replacement parts used in the repair of the appliance if the original parts prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions. Exclusions This limited warranty does not cover the following: 1. Products with original serial numbers that have been removed, altered or cannot be readily determined. 2. Product that has been transferred from its original owner to another party or removed outside the USA or Canada. 3. Rust on the interior or exterior of the unit. 4. Products purchased "as-is" are not covered by this warranty. 5. Food loss due to any refrigerator or freezer failures. 6. Products used in a commercial setting. 7. Service calls to correct the installation of your appliance or to instruct you how to use your appliance. 8. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances not in ordinary household use or used other than in accordance with the provided instructions. 9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc., which are not a part of the appliance when it is shipped from the factory. 10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or knobs, handles, or other cosmetic parts. 11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service calls to remote areas, including the state of Alaska. 12. Damages to the finish of appliance or home incurred during installation, including but not limited to floors, cabinets, walls, etc. 13. Damages caused by: services performed by unauthorized service companies; use of parts other than genuine Electrolux parts or parts obtained from persons other than authorized service companies; or external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God. 14. The consumer will be responsible for diagnostic, labor, and parts costs as well as any removal, transportation and reinstallation expenses which are incurred during service. 15. Labor costs for any and all repairs. 25

Major Appliance 5 Year Parts Only Limited Warranty DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED PARTS ONLY WARRANTY SHALL BE THE COST OF REPLACEMENT PARTS AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. If You Need Keep your receipt, delivery slip, or some other appropriate payment Service record to establish the warranty periodshould service be required. If service is performed, it is in your best interest to obtain and keep all receipts. Service under this warranty must be obtained by contacting Electrolux at the addresses or phone numbers below. This limited warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances NorthAmerica, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp. Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and parts under this warranty must be performed by Electrolux or an authorized service company. Product features or specifications as described or illustrated are subject to change without notice. USA Canada 1.866.942.1567 1.866.942.1567 Electrolux Major Appliances Electrolux Canada Corp. North America 5855 Terry Fox Way P.O. Box 212378 Mississauga, Ontario, Canada Augusta, GA 30907 L5V 3E4 26