Frigidaire FFTA1033Q2 Specifications

Wednesday, March 29, 2017

Home Comfort Through-The-Wall FFTA1033Q2 Air Conditioner Product Dimensions Height 14-1/2" Width 24" Depth 20-1/2" More Easy-To-Use Features Sleep Mode With Sleep Mode, the temperature gradually increases a few degrees over the evening, saving energy and creating a comfortable environment during the evening hours. Remote Control Offers you the flexibility to control the temperature and fan speed from anywhere in the room. Effortless™ Clean Filter Our antibacterial filter reduces bacteria, room odors and other airborne particles for a healthier, more comfortable environment. Power Cord Comes with an extra long three-prong cord — makes extension cords unnecessary. Effortless™ Restart Automatically resumes operating at its previous settings when power is restored to your unit. Clean Filter Alert Alert notifies you when your filter needs to be cleaned so you don’t have to keep track of it yourself. Signature Features Ready-Select® Controls Easily select options with the touch of a button. Effortless™ Remote Energy Saver Mode Temperature Control Reduce your utility bills in this mode. It Performance BTUs Remote control thermostat precisely cools similarly to central air, with the unit Cool 10,000 / 9,800 maintains preset room temperature, so turning on and off at different intervals you can remain comfortable at all times. to ensure the room temperature stays at the set temperature. Programmable 24-Hour Multi-Speed Fan On/Off Timer Features three different fan speeds, for With the 24-Hour On/Off Timer, you more cooling flexibility. can ensure your home will be cool and comfortable when you want it to be without having to worry about running up your utility bills. The built-in timer allows you to preset the unit to turn on and off in half-hour increments.

Home Comfort FFTA1033Q2 Through-The-Wall Air Conditioner Performance BTU (Cool) 10,000 / 9,800 Dehumidification (Pints / Hour) 2.8 Cool Area (Up To Sq. Ft.) 450 Energy Efficiency Ratio 9.8 Electrical Volts 230 / 208 Amps (Cool) 4.6 / 5.0 Watts (Cool) 1,060 / 1,045 Length of Power Cord (Min. / Max.) Plug Type (NEMA) 5.5' / 6' LCDI (6-15P)RAC Through-The-Wall Models (18" Sleeve Kit EA A Features Electronic Controls Frigidaire Baseline Ready-Select® Controls Fan Speeds (Cool / Fan) 3 / 3 Low Voltage Start-Up Yes Auto Cool Function Yes B Energy Saver Mode Yes C Sleep Mode Yes Filter Check Yes D 24-Hour On / Off Timer Yes Clean Air Ionizer Remote Control Full-Function Remote T’Stat Air CFM (High / Med / Low) 292 / 267 / 243 Air Direction Control 4-Way Fresh Air / Exhaust Vent / Closed No / No / Yes Filter Type Antibacterial Mesh Filter Access Slide-Out Slide-Out Chassis Warranty1 Yes Optional Accessories Through-The-Wall 18" Sleeve Kit PN # EA108T Trim Kit (for larger existing sleeve) PN # EA120T Architectural-Style Exterior Louvered Grille PN # EA109T Certifications ENERGY STAR® Performance AHAM Specifications Refrigerant R410a Shipping Weight (Approx.) 79 Lbs. Warranty 5 year sealed system / 1 year full parts and labor. 1 Plug Type (NEMA) 6-15P NOTE: For planning purposes only. Always consult local and national electric codes. Refer to Product Installation Guide for detailed installation instructions on the web at Product Dimensions Sleeve Cutout Dimensions A - Height 14-1/2" Height 15-5/8" B - Width 24" Width 25-15/16" C - Depth 20-1/2" D - Max. Wall Thickness 18" Accessories information available on the web at USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • Specifications CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • subject to change. FFTA1033Q2 10/15 © 2015 Electrolux Home Products, Inc.

Frigidaire Baseline Home Comfort FFTA1033Q2 Through-The-Wall Air Conditioner Plug Type (NEMA) 6-15P Home Comfort Specifications Replacement Installation • Product Shipping Weight (approx.) – 79 Lbs. • When replacing existing air conditioner with new unit, refer to • Single phase 3-wire cable, 230 / 208 Volt, 60 Hertz AC only electrical Product Installation Guide on web to identify existing wall-sleeve supply with ground required on separate circuit fused on both sides manufacturer and size compatibility. If proper installation and slope of line. are suspect, then correct installation of Frigidaire® Through-The-Wall • Amps @ 230 / 208 Volts = 4.6 / 5.0 Amps 18" Sleeve Kit PN # EA108T recommended. • Recommended Circuit Breaker – 15 Amps • Use of existing wall sleeve to mount new unit requires original sleeve be in sound structural condition with rear grille that attaches securely, • Unit equipped with 230 / 208V 3-wire power supply cord, NEMA plug or rear flange that serves as stop for unit. type 6-15P, approximately 72" long. • Preferable installation option, for increased efficiency and possibility • Unit’s increased performance characteristics result from two rear of drafts reduced, requires existing rear grille (mounted to sleeve) be intakes. For unit to operate at maximum efficiency, carefully follow replaced with new unit’s rear air-directional louvered grille (provided complete, detailed new or replacement installation instructions in accessory kit, shipped with unit). Non-preferable installation option provided in Product Installation Guide on web. of directly mounting rear louvered grille to unit can be considered, • Unit requires rearward slope when installation is complete, to allow requiring grille be mounted to unit prior to sleeve installation. condensate to drain from rear of sleeve. • Existing decorative exterior grille may be left in place, provided that proper air-directional rear louvered grille is installed. New Installation • For installation into larger existing sleeve, optional Trim Kit • For new installation, Frigidaire® Through-The-Wall 18" Sleeve Kit PN # EA120T available. PN # EA108T available. Recommended for proper installation. • Through-the-wall installation requires 18" maximum wall thickness. Note: For planning purposes only. Refer to Product Installation Guide on the web at for detailed instructions. • For energy-saving purposes, install unit in shady location, preferably a northern exposure; and do not block airflow inside with blinds, Optional Accessories curtains or furniture; or outside with shrubs, enclosures or other buildings. • Through-The-Wall 18" Sleeve Kit – (PN # EA108T). • Trim Kit (for larger existing sleeve) – (PN # EA120T). • Architectural-Style Exterior Louvered Grille – (PN # EA109T). USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • Specifications CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • subject to change. FFTA1033Q2 10/15 © 2015 Electrolux Home Products, Inc.