THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including but not limited to photocopying, recording, information retrieval systems, or computer network without the written permission of Sonos, Inc. Sonos and all other Sonos product names and slogans are trademarks or registered trademarks of Sonos, Inc. Sonos Reg. U.S. Pat. & Tm. Off. Sonos products may be protected by one or more patents. Our patent-to-product information can be found here: sonos.com/legal/patents AirPlay®, Apple Music™, FairPlay®, iPad®, iPhone®, iPod®, Tunes®, and OS X®, are trademarks of Apple Inc., registered in the U.S. and other countries. "Made for iPod", "Made for iPhone", and "Made for iPad" mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. Android™ is a trademark of Google, Inc. Amazon, Kindle, Kindle Fire, the Amazon Kindle logo and the Kindle Fire logo are trademarks of Amazon.com, Inc. or its affiliates. Sonos uses MSNTP software, which was developed by N.M. Maclaren at the University of Cambridge. © Copyright, N.M. Maclaren, 1996, 1997, 2000; © Copyright, University of Cambridge, 1996, 1997, 2000. All other products and services mentioned may be trademarks or service marks of their respective owners. March 2017 ©2004-2017 by Sonos, Inc. All rights reserved.
Sonos PLAY:1 The PLAY:1® is the most compact Sonos wireless speaker that lets you use the Sonos app to control and enjoy all the music you want all over your home (see The Sonos App for more information). • Two custom-designed drivers, 3.5 in / 9 cm mid-woofer and tweeter, each with a dedicated amplifier. • Play/Pause functionality remembers the last thing you were listening to. You can even skip to the next track with a double press. • Pair two PLAY:1s for amazing stereo sound or use two PLAY:1s as rear speakers for your Sonos PLAYBAR® home theater system. • Works seamlessly with the complete range of Sonos products. New to Sonos? It takes just a few steps to get Sonos up and running—simply follow the setup instructions packaged with your PLAY:1. Once you’ve got it set up, you can add more speakers any time. Adding to an existing Sonos system? Sonos can be easily expanded room by room. If you are adding a PLAY:1 to an existing Sonos system, see Adding to an Existing Sonos System for more information. Your Home Network To use the Sonos app, your device must be on the same network as Sonos. If you need help, please go to http://faq.sonos.com/searching.
2 Product Guide Requirements To access music services, Internet radio, and music stored on your computer or Network-Attached Storage (NAS) device, make sure your network meets these requirements. Note: Make sure your network has a high-speed Internet connection because Sonos is designed to provide you with free, online software updates. Your Sonos system must be registered to receive these updates so be sure to register during the setup process. We do not share your e-mail address with other companies. • High-speed DSL/cable modem, or fiber-to-the-home broadband connection for proper playback of music services. (If your Internet service provider only offers satellite Internet access, you may experience playback issues due to fluctuating download rates.) • If your modem isn’t a modem/router combination and you want to take advantage of Sonos’ automatic online updates or use a streaming music service, you’ll need to install a wireless router before setting up Sonos. Note: Sonos communicates over a 2.4GHz home network supporting 802.11 b/g/n wireless technology. 802.11n only network configurations are not supported—you can either change the router settings to 802.11 b/g/n or connect a Sonos product to your router. • Connect a Sonos BOOST or speaker to your router if: • You have a larger home where the WiFi performance isn’t reliable and you want to strengthen the wireless performance of your Sonos system. • Your WiFi network is already in high demand with streaming video and web surfing and you want to create a separate wireless network exclusively for your Sonos speakers. • Your network is 5GHz only (not switchable to 2.4GHz). • You have configured your router to support only 802.11n and can’t change the settings to support 802.11 b/g/n. • For best results, you should connect the computer or NAS drive that contains your personal music library collection to your network router using an Ethernet cable. The Sonos App You can use the free Sonos app with any compatible device, including: • Sonos app (Android)—Android 4.0 and higher; certain features require later versions. Touch the Play Store or Market button on your Android device to download the free Sonos app from Google Play. • Sonos app (iOS)—iPhone, iPad and iPod touch running iOS 8.0 or later; certain features may require later versions. Touch the App Store button on your iPhone, iPod touch or iPad to download the free Sonos app, or download the application from iTunes®. (If you download from iTunes, you will need to sync before you see the Sonos logo display on your device.) • Sonos app (PC)—Windows® 7 and higher; certain features require later versions. Download from our website at www.sonos.com/support/downloads.
Sonos PLAY:1 3 • Sonos app (Mac)—Macintosh® OS X 10.9 or later Download from our website at www.sonos.com/support/downloads. Note: Sonos CONTROL has been discontinued, but it’s compatible with your new Sonos product. PLAY:1 Top / Back On/Off Sonos is designed to be always on; the system uses minimal electricity whenever it is not playing music. To quickly stop streaming audio in all rooms, select Pause All from Rooms. To stop streaming audio in one room, press the Play/Pause button on the player. Play/Pause button Toggles between playing and pausing the audio in this room (defaults to restarting the same music source when pressed unless a different source is selected). • Press once to start or stop streaming audio • Press twice to skip to the next track (if applicable to the selected music source) • Press three times to skip to the previous track (if applicable to the selected music source) Status indicator Indicates the current status. During normal operation the white light is dimly lit. If desired, you can turn off the white light from Room Settings. See Player Status Indicators for a complete list of status indications.
4 Product Guide Volume up (+) Press these buttons to adjust the volume up and down. Volume down (-) Threaded mounting hole The PLAY:1 has an integrated mounting hole on the back of the unit so 1/4 inch / it can be wall-mounted if desired (mounting bracket not included.) See 20-thread Wall Mounting for more information. Ethernet port You can use an Ethernet cable (supplied) to connect the PLAY:1 to a router, computer, or additional network device such as a network- attached storage (NAS) device. AC power (mains) input Use only the supplied power cord to connect to a power outlet (using a (100 - 240 VAC, 50/60 Hz) third-party power cord will void your warranty). Insert the power cord firmly into the PLAY:1 until it is flush with the bottom of the unit. Selecting a Location You can locate a Sonos PLAY:1 just about anywhere. For maximum enjoyment, we have a few guidelines: • The PLAY:1 is designed to work well even when placed next to a wall or other surface. For optimum performance, maintaining more than 1 inch (2.5 cm) clearance around the back of the unit is recommended. • Care should be taken if placing the PLAY:1 close to an older CRT (cathode ray tube) television. If you notice any discoloration or distortion of your picture quality, simply move the PLAY:1 further from the television. • The PLAY:1 is humidity-resistant so you can use it in the bathroom; however it is not water-resistant so don’t position it near water or leave it outside during a rain storm. Wall Mounting The Sonos PLAY:1 has a standard 1/4”-20 threaded mounting socket. If desired, you can easily wall mount your PLAY:1 using a suitable mounting bracket (not included). Simply choose a location that’s close to an electrical outlet (power cord length is 2m), taking care to avoid heat, steam, dripping water or hidden wiring, and follow the instructions included with the wall mount kit. You can hang it right side up (control buttons on top) or upside down (control buttons on the bottom). Note: Be sure the wall mount bracket you purchase will support at least 8lbs. (3.6 kgs) and has a 1/4”-20 threaded post. Adding to an Existing Sonos System Once you’ve got your Sonos music system set up, you can easily add more Sonos products any time (up to 32). 1. Select a location for your PLAY:1 (see Selecting a Location above for optimal placement guidelines.)
Sonos PLAY:1 5 2. Attach the power cord to the PLAY:1 and apply power. Be sure to push the power cord firmly into the bottom of the PLAY:1 until it is flush with the bottom of the unit. Note: If you want to make a wired connection, connect a standard Ethernet cable from your router or another Sonos product (or a live network wall plate if you have built-in wiring) to an Ethernet port on the back of the PLAY:1. 3. Choose one of the following options: • Using the Sonos app on a mobile device: Select Add a Player or SUB from Settings and follow the on- screen prompts to add this product to Sonos. • Using the Sonos app on a Mac or PC: Select Add a Player or SUB from the Manage menu and follow the prompts to add this product to Sonos. Thick walls, 2.4 GHz cordless telephones, or the presence of other wireless devices can interfere with or block the wireless network signals from Sonos. If you experience difficulty after positioning a Sonos product, try one or more of the following resolutions—relocate the Sonos product; change the wireless channel your music system is operating on; connect a Sonos product to your router if your setup is currently wireless. Tune Your Room with Trueplay™ Go ahead, put your Sonos speakers wherever you want. Trueplay listens to your room and tunes your speakers so you hear the sound you love, custom tuned to the room where you’re listening (works on mobile devices running iOS 8 or later). Choose Settings -> Room Settings. Pick a room and touch Trueplay Tuning to get started. Note: Trueplay tuning is not available if VoiceOver is enabled on your iOS device. If you want to tune your speakers, first turn VoiceOver off on your device and then select Settings -> Room Settings from the Sonos app. Creating a Stereo Pair The stereo pair setting allows you to group two PLAY:1s, PLAY:3s or PLAY:5®s in the same room to create a wider stereo experience. In this configuration, one unit serves as the left channel and the other serves as the right channel. You cannot create a mixed stereo pair—the Sonos products in the stereo pair must be the same.
6 Product Guide Optimum placement information • When creating a stereo pair, it is best to place the two Sonos products 8 to 10 feet away from each other. • Your favorite listening position should be 8 to 12 feet from the paired Sonos products. Less distance will increase bass, more distance will improve stereo imaging. Note: The stereo pair setting is for use with PLAY:1, PLAY:3 and PLAY:5 units only. You cannot create a mixed stereo pair—both Sonos products in the stereo pair must be the same. Using the Sonos app on a mobile device 1. Select Settings -> Room Settings. 2. Select a PLAY:1 to pair. 3. Select Create Stereo Pair, and follow the prompts to set up the stereo pair. To separate a stereo pair: 1. Select Settings -> Room Settings. 2. Select the stereo pair you wish to separate (the stereo pair appears with L + R in the room name.) 3. Select Separate Stereo Pair. Using the Sonos app on a Mac or PC 1. Choose one of the following: • Using your PC, select Settings from the Manage menu. • Using your Mac, select Preferences -> Room Settings from the Sonos menu. 2. Select a PLAY:1 you want to pair from the Room Settings for drop-down list. 3. Click Create Stereo Pair and follow the prompts to set up the stereo pair.
Sonos PLAY:1 7 To separate a stereo pair: 1. Choose one of the following: • Using your PC, select Settings from the Manage menu. • Using your Mac, select Preferences -> Room Settings from the Sonos menu. 2. Select the Sonos stereo pair you wish to separate from the Room Settings for drop-down (the stereo pair will appear with L + R in the room name). 3. On the Basic tab, click Separate Stereo Pair. Surround Speakers Adding Surround Speakers You can easily pair two PLAY:1, PLAY:3 or PLAY:5 (gen2) speakers with a PLAYBAR to function as left and right surround channels in your Sonos surround sound experience. You can either configure surround speakers during the setup process, or follow the steps below to add them. • Make sure the Sonos products are the same—you cannot combine a PLAY:1 and a PLAY:3 to function as surround speakers. • Be sure to follow these instructions to set up your surround speakers. Do not create a room group or stereo pair as these will not achieve the left and right surround channel functionality. Using the Sonos app on a mobile device 1. From the Settings menu, select Room Settings. 2. Select the room the PLAYBAR is located in. 3. Select Add Surrounds. 4. Follow the prompts to add first a left and then a right surround speaker. Removing surround speakers 1. From the Settings menu, select Room Settings.
8 Product Guide 2. Select the room the surround speakers are associated with. The room name appears as Room (+LS+RS) on the Room Settings menu. 3. Select Remove Surrounds. 4. Select Next to drop the surround sound speakers from your surround system. If these were newly purchased PLAY:1s they will appear as Unused on the Rooms menu. If these PLAY:1s existed in your household previously, they revert back to their previous state. You can now move them to another room for individual use. Changing the surround settings The default setting is determined by the calibration process. If you wish to make a change, you can follow the steps below. 1. From the Settings menu, select Room Settings. 2. Select the room the PLAYBAR and surround speakers are located in. It appears as Room (+LS+RS) on the Room Settings menu. 3. Select Advanced Audio -> Surround Settings. 4. Choose one of the following: • Surrounds: Choose On or Off to turn the sound from the surround speakers on and off. • TV Level: Drag your finger across the slider to increase or decrease the volume of the surround speakers for playing TV audio. • Music Level: Drag your finger across the slider to increase or decrease the volume of the surround speakers for playing music. • Music Playback: Choose Ambient (default; subtle, ambient sound) or Full (enables louder, full range sound). This setting applies only to music playback, not TV audio. • Balance Surround Speakers (iOS): Select Balance Surround Speakers and follow the prompts to manually balance your surround speaker levels. Using the Sonos app on a Mac or PC 1. Select Manage -> Settings (PC) or Sonos -> Preferences (Mac). 2. Select Room Settings if it is not already highlighted on the left. 3. Choose the room the PLAYBAR is located in from the Room Settings for drop-down list. 4. From the Basic tab, select Add Surround Speakers. 5. Follow the prompts to add first a left and then a right surround speaker. Removing surround speakers 1. Select Manage -> Settings (PC) or Sonos -> Preferences (Mac). 2. Select Room Settings if it is not already highlighted on the left. 3. Choose the room the PLAYBAR is located in from the Room Settings for drop-down list. The room name appears as Room (+LS+RS). 4. From the Basic tab, click Remove Surrounds. If these were newly purchased PLAY:1s, they will appear as Unused in the Rooms pane. If these PLAY:1s existed in your household previously, they revert back to their previous state.
Sonos PLAY:1 9 Changing the surround settings The default setting is determined by the calibration process. If you wish to make a change, you can follow the steps below. 1. Select Manage -> Settings (PC) or Sonos -> Preferences (Mac). 2. Select Room Settings if it is not already highlighted on the left. 3. Choose the room the PLAYBAR and surround speakers are located in from the Room Settings for drop- down. 4. Select the Surrounds tab. 5. Choose one of the following: • Surrounds: Check to turn the sound from the surround speakers on; uncheck to turn it off. • TV Level: Click and drag the slider to increase or decrease the volume of the surround speakers for playing TV audio. • Music Level: Click and drag the slider to increase or decrease the volume of the surround speakers for playing music. • Music Playback: Choose Ambient (default; subtle, ambient sound) or Full (enables louder, full range sound). This setting applies only to music playback, not TV audio. Playing Music Make a selection from the Menu on your mobile device or from the MUSIC pane on a Mac or PC. Radio Sonos includes a radio guide that provides immediate access to thousands of free Internet radio stations and broadcast programs. You can easily find radio stations from all over the world—music, news, and variety programming, including archived shows and podcasts. To select a radio station, simply select Radio by TuneIn and choose a station. Music services A music service is an online music store or online service that sells audio on a per-song, per audiobook, or subscription basis. Sonos is compatible with several music services - you can visit our website at www.sonos.com/music for the latest list. (Some music services may not be available in your country. Please check the individual music service’s website for more information.) If you are currently subscribed to a music service that’s compatible with Sonos, simply add your music service user name and password information to Sonos as needed and you’ll have instant access to the music service from your Sonos system. 1. To add a music service, touch Add Music Services from the Menu. 2. Select the Sonos-compatible music service you would like to add. 3. Select Add to Sonos, and then follow the on-screen prompts. Your login and password will be verified with the music service. As soon as your credentials have been verified, the music service displays on the Menu.
10 Product Guide Free music service trials are available in some countries. (Please check the individual music service’s website for more information.) If there is a music service trial visible on the Music Services menu, simply touch it to select. Touch Add to Sonos -> I’m new to [music service], and then follow the prompts to activate the music trial. After the trial period is up, you will need to subscribe to the music service to keep the music playing. Local music library Sonos can play music from any computer or network-attached storage (NAS) device on your home network where you have shared music folders (up to 65,000 songs). During the setup process, you are guided through the process of accessing your local music library (such as your iTunes library). Over time, you may wish to add or remove folders from this list. Note: We recommend using the Sonos app for Mac or PC to add shared folders. For more information, please visit our website at http://faq.sonos.com/manage. To make changes to your local library using a mobile device, go to Settings and choose one of the following options: • To add a music folder, select Music Library Setup and: • Touch -> Add New Share (iOS). • Touch Add New Share (Android). • To remove a music folder, select Music Library Setup and: • Touch next to the folder you wish to remove (iOS). • Touch the folder and select Remove Share (Android). Sonos indexes your local music so you can view your music collection by categories (such as artists, albums, composers, genres, or songs.) If you add new music, simply update your music index to add this music to your Sonos music library. • To update your music library, select Manage Music Library -> Update Music Index Now. If you’d like your music library to update automatically each day, select Schedule Music Index Updates and then select an update time. Playing music from your mobile device You can play music and podcasts stored on any mobile device that’s on the same network as Sonos. Just choose On this [mobile device] from the Menu. Google Play Music (Android devices) You can play music to Sonos directly from the Google Play Music app on any Android device. This feature is available for both Standard and All Access Google Play Music customers. To play music directly from the Google Play Music app to Sonos, you must have both the Google Play Music app and the Sonos app installed on your mobile device. Simply open the Google Play Music app and connect to a Sonos room or room group to start the music.
Sonos PLAY:1 11 Control Sonos from your Spotify app You can always play Spotify from the Sonos app. Now you can control Sonos directly from your Spotify app too (Spotify premium subscribers only). While you’re listening to music in the Spotify app, select DEVICES AVAILABLE to connect to a Sonos room or room group. To use this feature you need to have a Sonos account. If you don’t have one, choose one of the following options: • On a mobile device: Go to Settings -> Advanced Settings and choose Control Sonos from Spotify. • On a PC: Go to Manage -> Settings and choose Advanced. From the Music Sources tab, choose Control Sonos from Spotify. • On a Mac: Go to Sonos -> Preferences and select Advanced. From the Music Sources tab, choose Control Sonos from Spotify. Equalization Settings The Sonos PLAY:1 ships with the equalization settings preset to provide the optimal playback experience. If desired, you can change the sound settings (bass, treble, balance, or loudness) to suit your personal preferences. Note: Balance is only adjustable when the PLAY:1 is used in a stereo pair. 1. Using a handheld controller, select Settings -> Room Settings. 2. Touch to select a room. 3. Select EQ, and then drag your finger across the sliders to make adjustments. 4. To change the Loudness setting, touch On or Off. (The loudness setting boosts certain frequencies, including bass, to improve the sound at low volume.) I have a new router If you purchase a new router or change your ISP (Internet service provider), you will need to restart all your Sonos products after the router is installed. Note: If the ISP technician connects a Sonos product to the new router, you only need to restart your wireless Sonos products. 1. Disconnect the power cord from all of your Sonos products for at least 5 seconds. 2. Reconnect them one at a time, starting with the Sonos product that is connected to your router (if one is usually connected). Wait for your Sonos products to restart. The status indicator light will change to solid white on each product when the restart is complete. If your Sonos setup is completely wireless (you don’t keep a Sonos product connected to your router), you will also need to change your wireless network password. Follow the steps below: 1. Temporarily connect one of your Sonos players to the new router with an Ethernet cable.
12 Product Guide 2. Select Advanced Settings -> Wireless Setup from the Settings menu. Sonos will detect your network. 3. Enter the password for your wireless network. 4. Once the password is accepted, unplug the player from your router and move it back to its original location. I want to change my wireless network password If your Sonos system is set up wirelessly and you change your wireless network password, you will also need to change it on your Sonos system. 1. Temporarily connect one of your Sonos players to your router with an Ethernet cable. 2. Choose one of the following options: • Using the Sonos app on a mobile device, select Settings -> Advanced Settings -> Wireless Setup. • Using the Sonos app on a PC, select Settings -> Advanced from the Manage menu. On the General tab, select Wireless Setup. • Using the Sonos app on a Mac, select Preferences -> Advanced from the Sonos menu. On the General tab, select Wireless Setup. 3. Enter the new wireless network password when prompted. 4. Once the password is accepted, you can unplug the player from your router and move it back to its original location. Player Status Indicators Indicator Lights Status Sonos Product Additional Information Flashing white Powering up BRIDGE, BOOST, CONNECT, SUB, CONNECT:AMP, DOCK, PLAY:1, PLAY:3, PLAY:5, PLAYBAR, PLAYBASE Solid white Powered up and associated BRIDGE, BOOST, You can turn the white status indicator (dimly lit) with a Sonos system (normal CONNECT, SUB, light on or off from Room Settings. operation) CONNECT:AMP, (Sonos products that are paired together DOCK, PLAY:1, share the same setting.) PLAY:3, PLAY:5, PLAYBAR, PLAYBASE Solid white Touch control(s) active PLAY:5 (gen2), Brightens when touch controls are (brightly lit) PLAYBASE activated.
Sonos PLAY:1 13 Indicator Lights Status Sonos Product Additional Information Flashing green Powered up, not yet BRIDGE, BOOST, For a SUB, this may indicate the SUB is associated with a Sonos CONNECT, SUB, not yet paired with a speaker. system CONNECT:AMP, Or, DOCK, PLAY:1, WAC (wireless access PLAY:3, PLAY:5, configuration) join ready PLAYBAR, PLAYBASE Slowly flashing Surround audio is off or PLAY:1, PLAY:3, Applicable for speaker configured as a green SUB audio is off PLAY:5 (gen2), surround speaker, or for a SUB paired SUB with a PLAYBAR. Solid green Volume set to zero or muted CONNECT, CONNECT:AMP, PLAY:1, PLAY:3, PLAY:5, PLAYBAR, PLAYBASE Flashing orange During SonosNet setup, this BRIDGE, BOOST, occurs after a button press CONNECT, SUB, while the product is CONNECT:AMP, searching for a household to DOCK, PLAY:1, join. PLAY:3, PLAY:5, PLAYBAR, PLAYBASE Rapidly flashing Playback / Next Song failed CONNECT, Indicates either playback or next song orange CONNECT:AMP, was not possible. PLAY:1, PLAY:3, PLAY:5, PLAYBAR, PLAYBASE Solid orange During wireless setup, this CONNECT, SUB, If the orange light is on AND the speaker’s occurs while the Sonos open CONNECT:AMP, volume level automatically reduces, this access point is temporarily PLAY:1, PLAY:3, indicates the speaker is in warning mode. active. PLAY:5, • Press the Pause button to stop the If you are not setting up PLAYBAR, audio. Sonos, this may indicate PLAYBASE • For Sonos products with a vent warning mode. opening (SUB, CONNECT:AMP), check to make sure it’s not blocked. • Check the room temperature to make sure it’s less than 104°F/ 40° C. • If the speaker is in direct sunlight, provide shade. • Allow the speaker to cool for several minutes and then press Play to restart the audio. • If the problem does not resolve, please contact Customer Care.
14 Product Guide Indicator Lights Status Sonos Product Additional Information Flashing green Speakers are being linked to BRIDGE, BOOST, Link the speaker(s) to your account. For and white your Sonos account. CONNECT, SUB, more information, see CONNECT:AMP, http://faq.sonos.com/accountlink. DOCK, PLAY:1, PLAY:3, PLAY:5, PLAYBAR, PLAYBASE Flashing red and Speaker repartitioning failed. BRIDGE, BOOST, Please contact Customer Care. white CONNECT, SUB, CONNECT:AMP, DOCK, PLAY:1, PLAY:3, PLAY:5, PLAYBAR, PLAYBASE Flashing red Speaker setup timed out. CONNECT, SUB, Unplug the speaker, wait 10 seconds, This happens if a speaker is CONNECT:AMP, plug it back in, and set it up. plugged in for 30 minutes PLAY:1, PLAY:3, without being set up. PLAY5, PLAYBAR, PLAYBASE Important Safety Information 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos components. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
Sonos PLAY:1 15 9. Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 10. Only use attachments/accessories specified by the manufacturer. 11. Unplug this apparatus during lightning storms or when unused for long periods of time. 12. Refer all servicing to Sonos qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cable or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 13. The Mains plug should be readily available to disconnect the equipment. 14. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 15. Do not expose apparatus to dripping or splashing and do not place objects filled with liquids, such as vases, on the apparatus. Specifications Feature Description Audio Amplifier Two Class-D digital amplifiers Tweeter One tweeter creates a crisp and accurate high frequency response Mid-Woofer One mid-woofer ensures the faithful reproduction of mid-range frequencies crucial for accurate playback of vocals and instruments, as well as delivery of deep, rich bass Stereo Pair setting Turns two PLAY:1s into separate left and right channel speakers 5.1 Home Theater Add two PLAY:1 speakers to PLAYBAR and SUB for a true surround sound experience
16 Product Guide Feature Description Music Audio Formats Supported Support for compressed MP3, AAC (without DRM), WMA without DRM (including purchased Windows Media downloads), AAC (MPEG4), AAC+, Ogg Vorbis, Apple Lossless, Flac (lossless) music files, as well as uncompressed WAV and AIFF files. Native support for 44.1kHz sample rates. Additional support for 48kHz, 32kHz, 24kHz, 22kHz, 16kHz, 11kHz, and 8kHz sample rates. MP3 supports all rates except 11kHz and 8kHz. Note: Apple “FairPlay”, WMA DRM and WMA Lossless formats not currently supported. Previously purchased Apple “FairPlay” DRM-protected songs may be upgraded. Music Services Supported Sonos works seamlessly with most music services, including Apple Music™, Deezer, Google Play Music, Pandora, Spotify and Radio by TuneIn, as well as downloads from any service offering DRM-free tracks. Service availability varies by region. For a complete list, see http://www.sonos.com/music. Internet Radio Supported Streaming MP3, HLS/AAC, WMA Album Art Supported JPEG, PNG, BMP, GIF Playlists Supported Rhapsody, iTunes, WinAmp, and Windows Media Player (.m3u, .pls, .wpl) Networking* Wireless Connectivity Connects to your home WiFi network with any 802.11 b/g/n router. 802.11n only network configurations are not supported—you can either change the router settings to 802.11 b/g/n or connect a Sonos product to your router. SonosNet™ Extender Functions to extend and enhance the power of SonosNet, a secure AES encrypted, peer-to-peer wireless mesh network dedicated exclusively for Sonos to reduce WiFi interference. Ethernet Port One 10/100Mbps Ethernet port SonosNet Extender Functions to extend and enhance the power of SonosNet 2.0 General Power Supply 100 - 240 VAC, 50/60 Hz, auto-switchable Top Panel Buttons Volume and Play/Pause. Press Play/Pause button once to start or stop the music; twice to skip to the next track Top Panel LED Indicates PLAY:1 status Dimensions (H x W x D) 6.36 x 4.69 x 4.69 (in) / 161.45 x 119.7 X 119.7 (mm) Threaded mount Standard 1/4”-20 threaded mounting socket Weight 4.08 lb (1.85 kg)
Sonos PLAY:1 17 Feature Description Operating Temperature 32º to 104º F (0º to 40º C) Storage Temperature 4º to 158º F (-20º to 70º C) Humidity Resistant Designed to withstand high-humidity, such as in a bathroom with a running shower. (The PLAY:1 is not waterproof or water-resistant.) Product Finish White with light metallic grille; black with graphite grille * Specifications subject to change without notice. Need More Help? • Visit our Frequently Asked Questions (FAQ) pages at www.sonos.com/support. • Ask us a question at http://www.sonos.com/emailsupport. Product Guide Feedback? We’d love to hear from you! We’ll read your feedback carefully and use it to help us improve our product guides. Write to us at: [email protected] If you’re having a problem with your Sonos system, please contact Customer Care so they can help. Email them at http://www.sonos.com/emailsupport.